-
3 Channel Digital Subwoofer Amplifier Board3 Channel Digital Subwoofer Amplifier Board The 3 channel digital subwoofer amplifier board runs on two high-quality TPA3116D2 digital amplifier chips, making it a reliable TPA3116D2 amplifier board for powerful audio applications. It is powered at a DC supply voltage of 12–24V. The subwoofer amplifier board...
- Rs 743/-
- Rs 743/-
-
Rs 1,324/-
Save Rs 581/- -
15 cm Camera Cable (51)15cm Camera Cable for Raspberry Pi The camera cable is compatible with NoIR camera for Raspberry Pi. The 15cm Camera Cable can be used for Raspberry Pi 3 and Raspberry Pi 2. Ribbon Cable with FFC contacts (Opposite-sided).
- Rs 30/-
- Rs 30/-
-
Rs 49/-
Save Rs 19/- -
12V 2 channel relay board (693)2 CH 12V Relay Board This 2 Road/Channel Relay Module (with light coupling) 12V module meets the safety standard as control areas and load areas have the isolation groove. It is important that the microcontroller share ground with the relay board along with other...
- Rs 72/-
- Rs 72/-
-
Rs 99/-
Save Rs 27/- -
CH376 USB Host Interface Module Flash Disk Drive RW ModuleCH376 USB Host Interface The "CH376S USB read/write module" has a CH376S chip onboard which does most of the hard work for you. All you have to do is send the module some commands from the Arduino and the CH376S chip will do the...
- Rs 229/-
- Rs 229/-
-
Rs 498/-
Save Rs 269/- -
Nano CNC Shield (124)3D Printer CNC Shield V4 Expansion Board for Nano Board CNC shield V4 needs to work with the Nano board. It can be used as a driver’s expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor...
- Rs 153/-
- Rs 153/-
-
Rs 349/-
Save Rs 196/- -
24V RGB 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof (355)24V RGB 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof 24V RGB 5050 SMD LED Strip with 1Meter length has 300 Bright, RGB LEDs on the single strip! The strip is comprised of 5050 Sized SMD RGB LEDs and draws a total of 22.5 Watts of Power. This RGB...
- Rs 419/-
- Rs 419/-
-
Rs 699/-
Save Rs 280/- -
Key Display For AVR Arduino New 8-Bit Digital LED Tube 8-Bit TM1638 ModuleKey Display For AVR Arduino The TM1638 Button Digital LED Display Module is used in chip TM1638, a collection of these three common MCU peripheral circuit, the biggest feature just takes three microcontroller like Arduino IO port to drive, do not need to scan...
- Rs 273/-
- Rs 273/-
-
Rs 376/-
Save Rs 103/- -
MQ-5 Gas Sensor For Methane(CNG), Propane, and Natural Gas Detector ModuleMQ-5 Gas Sensor The MQ-5 gas sensor is a device that is used to detect the presence of various gases, including methane, propane, and natural gas. It operates by measuring the resistance of a metal oxide semiconductor (MOS) material to changes in the concentration...
- Rs 85/-
- Rs 85/-
-
Rs 99/-
Save Rs 14/- -
V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm FilamentV6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament This is a V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament. It comes with a PTFE...
- Rs 25/-
- Rs 25/-
-
Rs 43/-
Save Rs 18/- -
Arduino Mega 2560 Pro ATmega2560 compatible BoardMega 2560 Pro CH340G ATmega2560 Board The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340. The board is compatible with Arduino Mega 2560. The Mega 2560 is an excellent solution for building exciting projects based...
- Rs 1,379/-
- Rs 1,379/-
-
Rs 1,799/-
Save Rs 420/- -
125 KHz ID Tags RFID ABS Coin with Hole125 KHz ID Tags RFID ABS Coin with Hole This is a 125 KHz ID Tags RFID ABS Coin with Hole. Uses EM format RFID signal:125Khz Non-contact reading Very durable (Over 20 years usage life) Completely waterproof, all-weather that can be used reliably in...
- Rs 58/-
- Rs 58/-
-
Rs 91/-
Save Rs 33/- -
74HC10 Triple 3-Input NAND Gate IC (7410 IC) DIP-14 Package (323)More sizes availableTriple 3-Input NAND Gate IC - 74HC10 The 74HC10 Triple 3-Input NAND Gate IC belongs to the 74HC series. This IC package comes with three independent positive logic 3-input NAND Gates fabricated in low-power hotkey technology. The 74HC10 IC operates at a wide range...
- Rs 17/-
- Rs 17/-
-
Rs 30/-
Save Rs 13/- -
Arduino Micro with Headers A000053Arduino Micro with Headers The Arduino Micro was developed by Arduino in collaboration with Adafruit. The Arduino micro is a powerful development board integrated with the ATmega32U4 microcontroller. This arduino board features 20 digital input/output pins (of which 7 can be used as PWM outputs...
- Rs 2,399/-
- Rs 2,399/-
-
Rs 2,999/-
Save Rs 600/- -
CD4082 Dual 4 Input AND Gate IC DIP-14 Package (323)More sizes availableDual 4 Input AND Gate IC - CD4082 CD4082 belongs to the CD4XXX IC series. This CD4082 is designed as a monolithic Dual 4 Input AND Gate designed by implementing the complementary MOS technology, integrated with P and N-type enhancement mode transistors. The CD4082...
- Rs 22/-
- Rs 22/-
-
Rs 29/-
Save Rs 7/- -
Raspberry Pi Original Mouse (Black/Grey) (83)Raspberry Pi Official Mouse Online The Official Raspberry Pi mouse is a three-button optical mouse with a scroll wheel that connects to your Raspberry Pi board with a USB type-A connector. The mouse is compatible with all Raspberry Pi boards (including the Raspberry Pi Zero...
- Rs 630/-
- Rs 630/-
-
Rs 1,699/-
Save Rs 1,069/- -
12-Stage Binary Ripple Counter IC - 74HC404012-Stage Binary Ripple Counter IC - 74HC4040 The 74HC Series 74HC4040 IC is a 16 Pin 12-Stage Binary Ripple Counter IC having 2V to 6V Operating Voltage range with a 1uA low input current. It has a clock input (CP), an overriding asynchronous master reset input...
- Rs 25/-
- Rs 25/-
-
Rs 52/-
Save Rs 27/- -
CD4518 Dual BCD Up Counter IC DIP-16 Package (324)More sizes availableCD4518 - Dual BCD Up Counter IC The CD4x Series CD4518 consists of two identical, internally synchronous 4-stage counters. The counter stages are D-type flip-flops having interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or negative-going transition. For single-unit operation, the...
- Rs 21/-
- Rs 21/-
-
Rs 32/-
Save Rs 11/- -
Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver with Heat SinkUltra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver with Heat Sink The Ultra quiet LV8729 4-layer Substrate Stepper Motor Driver Module with 128 subdivisions is used in 3d printers and is a Best suited Moter Driver for Nema stepper motor whose current is less than...
- Rs 639/-
- Rs 639/-
-
Rs 882/-
Save Rs 243/- -
MQ-7 Gas Sensor For Carbon Monoxide Detector ModuleMQ-7 Gas Sensor The MQ-7 gas sensor is a device that can detect the presence of carbon monoxide (CO) gas in the air. It is commonly used in applications such as gas leak detectors, safety devices, and industrial control systems. The MQ-7 sensor operates...
- Rs 89/-
- Rs 89/-
-
Rs 170/-
Save Rs 81/- -
Robocraze Ai Thinker ESP-01F ESP8285 Serial WiFi Module (163)Ai Thinker ESP-01F ESP8285 Serial WiFi Module Ai Thinker ESP-01F ESP8285 Serial WiFi Module has a highly competitive package size and ultra-low technology. ESP-01F can be widely used in a variety of networking, for home automation, industrial wireless control, baby monitors, wearable electronic products,...
- Rs 170/-
- Rs 170/-
-
Rs 270/-
Save Rs 100/-
Best Price Guarantee
Ready Stock for Bulk Purchase
Dedicated Account Managers
5% GST Benefits for Eligible SEZ and Edu
Technical Support Available
1-Year Manufacturer Warranty
Chat
