Universal Device Programmers for IC & Chip Programming

PICKit 3.5 Programmer The PICkit 3.5 programmer allows debugging and programming of PIC and dsPIC Flash microcontrollers at the most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE).  The MPLAB PICkit 3 is connected to the...

PICkit3 USB Debugger Programmer Emulator Controller Development Board The MPLAB PICkit3 Debugger Programmer makes it easier to debug and program PIC and dsPIC Flash microcontrollers. Compared to earlier generations like the ICD2, it offers more stability and connects to your PC with ease via...

ULINK2 ARM USB JTAG Programmer ARM USB Compatible JTAG Adapter Debugger Ulink-II Ulink 2 deos not need any specific drivers. It is automatically configured as a HID by Plug and Play in Windows. Overview: Latest Upgraded version of the ULink emulator. Not only has...

USB ISP Programmer Version 2.0 This programmer is based on Thomas Fischl's usb asp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegant. The USB interface is achieved by using an atmega processor...

TL866 - Universal IC Programmer The TL866II plus universal programmer is a well designed programmer of high density SMD technology, developed with an easy to use interface. TL866II plus USB programmer support 15000+ic spi flash and EEPROM 8051 MCU pic AVR gal. TL866ii plus programmer...

RT809F Serial ISP Programmer Standard Configuration with Repair Tool The RT809F Serial ISP Programmer Standard Configuration is a high-performance and versatile in-system programming tool designed for flashing, repairing, and debugging a wide range of microcontrollers, EEPROMs, Flash ICs, and BIOS chips. It supports popular...

CP2102 USB to TTL Converter Cable This cable is easiest way ever to connect to the serial console port of your microcontroller, Raspberry Pi or router. The USB connector contains a USB - Serial converter chip and at the other end of the 90cm...

ST-LINK/V2 Debugger and Programmer USB The ST-Link V2 debugger and programmer is designed for STM8 and STM32 and is manufactured with PCB installed inside of aluminum alloy U disk shell. This factory firmware has been upgraded to support the full-range STM32 SWD and a...

ST-LINK V2/V2.1 USB-C Programmer and Debugger for STM32 Microcontrollers - 7Semi The 7Semi ST-LINK V2/V2.1 USB-C Programmer and Debugger is designed for seamless development and troubleshooting of STM32 microcontrollers. Offering SWIM and JTAG/SWD interface support, it enables precise programming and debugging tasks. The upgraded...

CH341A Series Burner Chip Programmer The CH341A series burner chip programmer is a low-cost mini USB  EEPROM Flash BIOS USB Programmer that was built and designed to support 24 EEPROM and 25 SPI flash 8pin/16 pin chip. This CH341A series programmer is integrated with a powerful CH341A chip...

ST-Link/V2 Programmer and Debugger ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application...

ST-LINK/V2 and ST-LINK/V2.1 USB Debugger Programmer with Original STM Chip - 7Semi The 7Semi ST-LINK/V2 and ST-LINK/V2.1 USB Debugger Programmer with Original STM Chip are reliable tools designed for STM32 microcontroller development. These USB-based programmers and in-circuit debuggers support both SWD (Serial Wire Debug)...

Witty Fox - ESP Programmer WittyFox ESP Programmer is a more convenient CP2102-based USB to UART converter with a built-in ESP reset circuit. It makes programming and debugging ESP series boards easier and more straightforward as the pin connections are 1:1 and can be...

ESP32 & ESP8266 USB Programmer Rev1.0 With Auto Boot If you want to simplify your development and debugging tasks, the ESP32 & ESP8266 USB Programmer Rev1.0 with Auto Boot is here to help. This handy tool makes it easy to download firmware and handle...

ESP32 CAM USB Programmer Rev2.0 With Auto Boot If you've been frustrated by the tricky process of programming your ESP32-CAM, let me introduce you to the ESP32 Cam Programmer Rev2.0. This handy little tool adds the missing USB programming feature that the ESP32 CAM...

Universal Programmer TOP2013 The TOP2013 is a universal programmer from Seeit. The TOP2013 is designed to work with components with up to 32 pin, from a range of manufacturers. These components include EPROMs, EEPROMs and FLASH memories. A full list of compatible devices can...

TOP3000 Universal Programmer The Top3000 Universal Programmer is powered by a USB interface or a 5V power supply. This universal programmer is a Top3000 programmer which is small, lighweight, highly reliable, and consumes low power. The Top3000 Universal Programmer is highly compatible with notebooks and...

HIPG854 Universal Programmer The HIPG854 Universal programmer is good economical universal programmer that supports wide range of ATMEL,AVR,PIC,EPROM,EEPROM many more ICS. Universal programmers are used for programming a wide variety of devices without requiring family-specific modules and are suited to development projects and low volume production programming. The HIPG854 Universal...

Elementz AVR USB Programmer with Cable USB AVR USBISP programmer will allow users to painlessly transfer hex programs to most ATMEL AVR microcontrollers. It is more reliable than most other AVR programmers available. Entire AVR programmer has been built with using common parts and...

SMD IC Adapters Set for Programmers By using the SMD IC adapter set, you can easily convert your SMD component into DIP format which makes the mounting process much easier. The set of 9 SMD IC adapter pieces are perfect for students, hobbyist & professionals who...