Hand Tools for Electronics, DIY & Repairs Online – Robocraze

Free Delivery on Orders Above Rs 500/- Pan-India

Cash on Delivery Available for Orders above Rs.500/- and Upto Rs 3000/-

SAVE more when you BUY more. Upto 30% Off on BULK PURCHASE

GST Invoices for Your Business

Dedicated Technical Support Team

Safely Delivering Genuine Products PAN INDIA

Support

Recently Viewed Products

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Tool Usage Guide for Beginners in Electronics

1. Wire Strippers

Used to remove insulation from wires without damaging the copper inside.
Essential for sensor wiring, breadboard jumpers, and battery connections.

Tip: Use the correct gauge slot to avoid cutting the wire.

2. Side Cutters / Diagonal Cutters

Used for cutting wires, leads of electronic components, zip ties, and small plastic parts.
Ideal for trimming resistor/LED legs after soldering.

3. Needle-Nose Pliers

Helps hold tiny components securely.
Useful for bending leads, placing components into tight spaces, and pulling wires.

4. Tweezers (ESD-safe for electronics)

For picking up SMD components, jumpers, screws, and small connectors.

5. Screwdrivers & Precision Sets

Used to open enclosures, tighten terminal blocks, and assemble DIY kits.
Essential for projects involving Arduino cases, drone frames, and robotics chassis.

6. Soldering-Related Tools (if shown in category)

Solder wick, helping hands, flux pens, and desoldering pumps help beginners fix mistakes easily.

Comparison Table: Pliers vs Cutters vs Strippers

Tool Type	Primary Use	Ideal For	Skill Level
Pliers (Needle-Nose)	Holding, bending, pulling	Robotics, PCB placement	Beginner–Advanced
Side Cutters	Cutting wires & leads	Circuit trimming, repairs	Beginner
Wire Strippers	Removing insulation	Sensor wiring, breadboarding	Beginner

DIY Electronics Project Setups Using These Tools<

1. Arduino / ESP32 Starter Projects

Wire stripper → prepare jumper wires
Needle-nose pliers → hold micro-components
Side cutters → trim surplus wire
Precision screwdrivers → mount modules in cases

2. Robotics Chassis Assembly

Pliers → tighten nuts & motor mounts
Screwdrivers → assemble wheels, brackets
Cutters → clean wiring for motor driver board

3. Sensor & IoT Prototypes

Strippers → prepare sensor leads
Tweezers → place small components on breadboards
Cutters → trim excess leads
Pliers → secure connectors

4. Basic Soldering Projects (LED boards, buzzers, relays)

Cutters → trim soldered leads
Tweezers → position LEDs & resistors
Pliers → bend component legs for neat assembly

BUY HAND TOOLS ONLINE IN INDIA

Hand tools are extremely useful for everyday tasks. Humans have used them since ancient times to complete a variety of useful tasks. Hand tools come in a variety of shapes and sizes and can be used for a variety of tasks. Some are versatile, while others are designed for a specific task.

A list of some hand tools are

Pliers, Nippers, Strippers, Cutters
Screwdrivers
Tweezers

Pliers

Pliers come in a variety of shapes and sizes. Flat-nose pliers and needle-nose pliers are the two most commonly used types of pliers in tools & instruments.

Price Chart of Pliers in India

Plier type	Price
Smooth Nose Piler NP-99	Rs. 206/-
Nose Plier NP-01 5" Inch	Rs. 77/-
Multitec MT-555 Plier 8"	Rs. 195/-
Multitec MT-535 Nose Plier	Rs. 181/-

Screwdrivers

A mismatched screwdriver set can strip a screw or make it nearly impossible to remove from the surface so, you must select a screwdriver set that is designed specifically for its intended use.

Price Chart of Screwdrivers in India

Screwdriver type	Price
32 in 1 Screw Driver Set	Rs. 132/-
Omega O-01 Screwdriver Set	Rs. 153/-
Multitec SDK-600 Screw Driver Set	Rs. 230/-
Multitec STB-330 Screw Driver Set	Rs. 175/-
Mini Electric Drill Set	Rs. 1135/-

Tweezers

Because of the size and shape of the tools we grab, grip, place, or hold, a variety of tweezer tip styles and shapes are required. Flat, round, pointed, bent, or square tips are all possible.

Price Chart of Tweezers in India

Tweezer type	Price
T15 Stainless Steel Cross Tweezer	Rs. 27/-
TS10 Straight Tweezer	Rs. 25/-
Tweezer	Rs. 31/-
Tweezer - Pack of 7	Rs. 250/-
Soldron Tweezer and Cutter Pouch Set	Rs. 1247/-

Wire strippers

Wire strippers look like pliers or scissors. Most wire strippers can perform a variety of tasks, but their primary function is to remove the insulation from the ends of wires. Wire strippers come in a variety of shapes and sizes, and some even have additional tool functions.

Price Chart of Wire Strippers in India

Stripper type	Price
Multitec MT-02DX Wire Stripper	Rs. 255/-
Mini Wire Stripper	Rs. 51/-
Multitec MT-02DX+ Stripper	Rs. 265/-
Multitec MT-150B-SS Stripper	Rs. 125/-

Price Chart of Nippers, Cutters in India

Product type	Price
Multitec MT-07-SS Nipper	Rs. 195/-
Multitec MT-07 Nipper	Rs. 72/-
Arrow Wire Nipper 07	Rs. 68/-
Multitec MT-111-SS Cutter	Rs. 181/-
Multitec MT-06 Cutter	Rs. 98/-
Piergiacomi Lead Cutter TRE-03-NB	Rs. 466/-

Related Searches

Soldering instruments | Glue guns and adhesives | Mechanical tools | Protection and safety gears | Measuring Tools

Popular searches

M5Stack | Development Boards | DIY Kits | 3D Printers/Pens | IOT & Wireless | Sensors | Drones/UAV | Motors & Mechanical | Displays | Batteries & Power Supply | Tools & Instruments | Cables & Connectors | Prototyping & Misc | Motor Drivers | Heat Sink

1. What are the types of hand tools?

A hand tool is any tool that is powered by hand rather than a motor. Hand tools categories include: Pliers, Nippers, Cutters, Strippers, Screwdrivers, and Tweezers.

2. What are hand tools?

For everyday tasks, hand tools are extremely useful, and we use them to complete a variety of useful tasks. These tools & Instruments are available in a variety of shapes and sizes and can be used for a wide range of tasks. Some tools are multipurpose, while others are designed for a specific task.

3. What are pliers used for?

Pliers are hand tools used for holding and gripping small objects as well as bending and cutting wire. Slip-joint pliers have grooved jaws, and the pivot hole in one member is elongated so that the member can pivot in either of two positions to most effectively grasp objects of varying sizes. The jaws of some pliers have a section that can cut soft wire and nails.

4. What is a screwdriver used for?

Screwdrivers are hand-operated tools that are used for turning screws with slotted heads. Standard screwdrivers with flat blade tips and a variety of sizes are used for screws with one straight diametral slot cut across the head. A special screwdriver with a blade tip that fits the slots is required for special screws with cross-shaped slots in their heads.

5. What is a tweezer used for?

Tweezers (or forceps) are finger extensions that allow us to grab, grip, place, remove, or hold items that are too small or delicate for our fingers to manipulate. A variety of tweezer tip styles and shapes are required due to the size and shape of the items we grab, grip, place, or hold. Tips can be flat, round, pointed, bent, or square. Tweezer bodies can also be straight, bent, curved, or angled for easier access to the objects they must handle.

6. What is a nipper tool used for?

A nipper is a hand tool used to cut along curved lines by biting off small chunks of tile. A nipper is similar to pliers in that it has two handles that are connected at a pivot point. The main distinction is that nipper jaws have cutting edges.

7. What is a wire stripping tool?

A wire stripper is a portable handheld tool that workers, particularly electricians, use to remove the protective coating from an electric wire to replace or repair the wire. It can also strip the ends of electric wires so that they can be connected to other wires or terminals. A wire stripper is frequently regarded as an essential tool for professional electricians and other related personnel.

8. What are cutters used for?

Cutters are designed to cut materials such as wires, cables (electrical, coax, multi-strand), wire ropes, fencing, bolts, rods, pre-stressed concrete wires, and strapping.

9. Are these tools suitable for electronics projects?

Yes, many of the hand-tools in our collection are very well suited for electronics work. For example, we list precision cutters, wire-strippers and pliers that are described as suitable for electronics, telecommunications, computers and PCB assemblies. Just make sure you choose the right size and specification for your project (for example small screws, tight spaces, delicate components).

10. Do you provide mini drills and precision screwdrivers?

We offer precision screwdriver sets in our hand-tools collection for example, multi-bit 32 in 1 screwdriver set listed under screwdrivers. While a specific listing for a mini drill isn't clearly mentioned in the hand-tools collection, our Tools & Instruments section includes many specialized tools for electronics & robotics. If you need a mini drill, it's worth checking our full site or contacting support to see whether we can source one under hand tools or a tools & instruments.

11. Can I buy individual tools or only kits?

You can buy the tools individually as well as complete kits. Our listings show standalone items (for example cutters, nose-pliers, wire-strippers) sold individually. We also offer kits (for example multi-bit screwdriver sets). So, you have both options: individual tools and full kits, depending on your needs.