1. What is wire to wire connector?

Wire-to-wire connectors are used to connect two wired connectors. Wired Connectors are used as electrical, electronic components and computer connectors. Common specifications for wire-to-wire connectors include mating combination or gender, number of circuits or positions, and wire size. Required to make wiring connections such as installing electrical outlets, light switches, ceiling fans, and lighting fixtures.

2. What are jumper wires used for?

Jumper Wire is a wire with either male or female connector at it's end. Jumper Wire is used for making a temporary connection using breadboards or berg Strips. Jumper Connectors can be used to connect two male pins of a breadboard together or connect two male pins on the same side of a strip to each other. It can also be used in the same way as normal wire, but with a female connector at one end to allow for connection with another strip or breadboard. It can be used to connect or transfer power between devices, and it can also be used to connect a load to a power source.

3. What are wires and connectors?

Wires: Wires are conductive electronic components that are used to build power/data connection between two circuits or devices.Connectors: Connectors are used to connect two wire-terminated connectors.

4. What is jumper connector?

A jumper connector is a jumper wire connector mostly used in Electronic projects prototyping. Jumper wires can be used to make temporary circuit connection when making a project. A jumper Wire connector can be used with all types of breadboard.

Buy Wires & Connectors for Electronics Projects Online

Recently Viewed Products

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Wires and Connectors

Wires and connectors electronic components that are used to connect two or more electronic devices. They can be used to make connections between two or more electronic components such as computers, mobile phones, printers, speakers, etc. Wires and connectors come in different types depending on their purpose.

For example, wires and connectors can be used to connect electronic components together, connect computer peripherals together, connect an appliance to a power source, connect a device to another device, connect a device to a wall socket, connect a device to the internet, connect a device to its own battery, connect a device to ground, connect a device to other devices, connect a device to itself, connect a device to an antenna, connect.

There are many types of electronic cables that can be used with electronic devices. Most consist of a single wire covered with insulation, but other types of wire are also used in large quantities.

The type of electronic connector or cable you need depends on your application. Many other types of wire are available, depending on the application.

There are many different types of wire and connectors that can be used to complete a circuit.

Robocraze has wide collection of Wired of multiple diameters like 10 awg wire, 12 awg wire, 20 awg wire, 22 awg wire etc.

These wires for electronic projects are helpful in electronic components interfacing and prototyping.

Wire Types Comparison Chart

Wire Type	Description	Best For	Typical Gauge
Single-Strand (Solid Core)	Rigid wire that holds its shape; easy to insert into breadboards.	Breadboard prototyping, jumper links, fixed lines in small circuits.	22 AWG, 24 AWG
Jumper Wires (Male/Male, Male/Female, Female/Female)	Pre-cut, pre-crimped wires used to connect modules quickly.	Arduino, sensors, breadboards, modules, breakout boards.	Typically 26 AWG–28 AWG
Ribbon Cable (Multicolor Flat Cable)	Flat multi-wire cable ideal for compact or organized connections.	GPIO connections, Raspberry Pi, displays, grouped wiring.	26 AWG or 28 AWG
Connector Wires (Dupont / JST / XT60 / Terminal Leads)	Specialized wires with secure connectors for modules and power systems.	Motors, batteries, power distribution, structural wiring.	18 AWG–28 AWG depending on current needs

Tips for Proper Soldering & Wiring Practices

Use the correct wire gauge: Higher current devices need thicker wires (18–22 AWG). Small signal wires can use 26–30 AWG.

Pre-tin wires before soldering: Add a thin layer of solder to the wire tip to make joints stronger and cleaner.

Avoid cold solder joints: Ensure the solder fully melts and flows around the wire and pad.

Use heat shrink tubing: Insulate exposed joints to prevent shorts and improve durability.

Keep wires organized: Use cable ties or labels for multi-wire builds.

Check polarity: Always confirm positive/negative lines when wiring motors, batteries, and power modules.

Don’t overload wires: Thin wires may overheat or melt under high current — match wire gauge to the load.

Test connections: Use a multimeter to check continuity before powering your circuit.

AWG to MM Convert Chart

AWG of Wire	Diameter (mm)
0000 (4/0)	11.684
000 (3/0)	10.4049
00 (2/0)	9.2658
0 (1/0)	8.2515
1	7.3481
2	6.5437
3	5.8273
4	5.1894
5	4.6213
6	4.1154
7	3.6649
8	3.2636
9	2.9064
10	2.5882
11	2.3048
12	2.0525
13	1.8278
14	1.6277
15	1.4495
16	1.2908
17	1.1495
18	1.0237
19	0.9116
20	0.8118
21	0.7229
22	0.6438
23	0.5733
24	0.5106
25	0.4547
26	0.4049
27	0.3606
28	0.3211
29	0.2859
30	0.2546
31	0.2268
32	0.2019
33	0.1798
34	0.1601
35	0.1426
36	0.127
37	0.1131
38	0.1007
39	0.0897
40	0.0799

For those who are prepared to take on their tasks, Robocraze is the best place to be. Being the best option, we provide the best cables, connectors, and electronic components available in India. Regardless of your level of experience, we provide all the resources required for implementing your ideas.

Robocraze offers high-quality jumper wires, breadboard wires, connectors, cables and electronic components from reputable companies at affordable costs. Our quick shipment means you won't have to wait long to start creating, and our helpful crew is always there to assist you along the process.

All Categories

Buy Wires & Connectors for Electronics Projects Online

Categories

Refined By Clear all

Availability

Price

Featured Products

Recently Viewed Products

All About Electronic Wires & Connectors for DIY Projects

Wires and Connectors

Wires & Connectors – Types and Best Uses

Wire Types Comparison Chart

Tips for Proper Soldering & Wiring Practices

AWG to MM Convert Chart

Related Collections

Frequently Asked Questions

1. What is wire to wire connector?

2. What are jumper wires used for?

3. What are wires and connectors?

Wires: Wires are conductive electronic components that are used to build power/data connection between two circuits or devices.

Connectors: Connectors are used to connect two wire-terminated connectors.

4. What is jumper connector?

A jumper connector is a jumper wire connector mostly used in Electronic projects prototyping. Jumper wires can be used to make temporary circuit connection when making a project. A jumper Wire connector can be used with all types of breadboard.

Let customers speak for us

All Categories

Buy Wires & Connectors for Electronics Projects Online

Categories

Refined By Clear all

Availability

Price

Featured Products

Sort by:

Recently Viewed Products

All About Electronic Wires & Connectors for DIY Projects

Wires and Connectors

Wires & Connectors – Types and Best Uses

Wire Types Comparison Chart

Tips for Proper Soldering & Wiring Practices

AWG to MM Convert Chart

Related Collections

Frequently Asked Questions

1. What is wire to wire connector?

2. What are jumper wires used for?

3. What are wires and connectors?

Wires: Wires are conductive electronic components that are used to build power/data connection between two circuits or devices.

Connectors: Connectors are used to connect two wire-terminated connectors.

4. What is jumper connector?

A jumper connector is a jumper wire connector mostly used in Electronic projects prototyping. Jumper wires can be used to make temporary circuit connection when making a project. A jumper Wire connector can be used with all types of breadboard.

Sign up for our newsletter

Shop the look

Choose Options

Edit Option

Back In Stock Notification

Compare

Choose Options

Let customers speak for us