-
3D Touch Auto Leveling Sensor for 3D printers3D Touch Auto Leveling Sensor for 3D printers 3DTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.3DTouch features simple, smart, and precise. It...
- Rs 1,189/-
- Rs 1,189/-
-
Rs 1,676/-
Save Rs 487/- -
LCD 12864 Graphic Display with Adapter and Cable (224)3D Printer 128x64 Smart LCD Display Controller for RAMPS 1.4 This smart LCD kit is a 3D printer 128×64 Smart LCD controller for ramps 1.4 and contains the following components: SD-Card reader Rotary encoder 128×64 LCD display You can easily connect it to your Ramps board...
- Rs 1,150/-
- Rs 1,150/-
-
Rs 1,499/-
Save Rs 349/- -
RP203 12v 58mm Panel Thermal PrinterRP203 58mm Panel Thermal Printer For your electrical and IoT projects, are you looking for an efficient, reliable printing solution? Browse no further than the RP203 thermal printer, a compact and robust 58mm thermal printer module designed specifically for embedded printing needs. Its direct...
- Rs 1,835/-
- Rs 1,835/-
-
Rs 2,290/-
Save Rs 455/- -
3D Printer Ramps 1.4 ShieldRAMPS 1.4 Shield for 3D Printer The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA...
- Rs 315/-
- Rs 315/-
-
Rs 377/-
Save Rs 62/- -
Aluminum Heatsink for A4988 DRV8825 Stepper Motor DriverAluminum Heatsink for A4988 DRV8825 Stepper Motor Driver The Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver features thermally conductive adhesive tape at its attaching side which helps cooling effect to occur more rapidly. The installation includes only removing the heatsink protection and sticking it by gently pressing...
- Rs 17/-
- Rs 17/-
-
Rs 29/-
Save Rs 12/- -
Thermistor Temperature Sensor HT-NTC100K- 2MThermistor Temperature Sensor HT-NTC100K- 2M NTC type temperature sensor 10K 1% with Two tinned copper wire cables consists of NTC element, SUS housing, two tinned wire cable, terminal, and temperature probe. The sensor is protected by a rubber or a stainless steel capsule, both waterproof....
- Rs 103/-
- Rs 103/-
-
Rs 119/-
Save Rs 16/- -
LCD 2004 Graphic Smart Display with Adapter and Cable (244)3D Printer - LCD 2004 Graphic Smart Display The intelligent controller includes an sd card reader, rotary encoders and a 20-character — 4 line lcd display. You can easily connect it to your ramps 1. 4 Board using "smart adapter" included. This panel connect...
- Rs 539/-
- Rs 539/-
-
Rs 726/-
Save Rs 187/- -
PT100 M6 Screw Probe Thermocouple Temperature Sensor (1 Meter) (344)PT100 M6 Screw Probe Thermocouple Temperature Sensor (1 Meter) Pt1000 sensors are the second most common type of platinum resistance thermometer. Often resistance thermometers are generally called Pt1000 sensors. 1000 refers to that at 0°C sensors has a resistance of 1000 ohms (?). Pt1000 sensors are used...
- Rs 138/-
- Rs 138/-
-
Rs 199/-
Save Rs 61/- -
3D printer parts heating-controller MKS MOS25 V1.0 for heat bed extruder MOS module support big current 25A3D printer parts heating-controller MKS MOS25 V1.0 for heat bed extruder MOS module support big current 25A This is a Heated Bed controller that can control the temperature of any 12V/24V heated bed with a maximum current rating of 25A. Very powerful to withstand higher...
- Rs 179/-
- Rs 179/-
-
Rs 267/-
Save Rs 88/- -
3D Printer Power Controller Module for Heated Bed3D Printer Power Controller Module for Heated Bed The 3D printer power controller module is a power expansion board that features a one of a kind snow flak heat sink design for the best heat dissipation possible. This power controller module for 3D printers...
- Rs 139/-
- Rs 139/-
-
Rs 199/-
Save Rs 60/- -
RepRap MK2B 3D printers Dual Power PCB HeatBed With 14AWG Cable (Red)RepRap MK2B 3D printers Dual Power PCB HeatBed With 14AWG Cable (Red) A heatbed improves printing quality by helping to prevent warping. As extruded plastic cools, it shrinks slightly. When this shrinking process does not occur throughout a printed part evenly, the result is...
- Rs 859/-
- Rs 859/-
-
Rs 899/-
Save Rs 40/- -
3D Printer Ramps 1.4 Adapter LCD2004 Module/12864 Control Panel Adapter Display3D Printer Ramps 1.4 Adapter LCD2004 Module/12864 Control Panel Adapter Display This adapter is for RAMPS 1.4 Smart Controller LCD 2004 & LCD 12864 Can easily connect it to your RAMPS1.4 shield using this smart adapter. After connecting the panel to your RAMPS1.4 shield...
- Rs 76/-
- Rs 76/-
-
Rs 99/-
Save Rs 23/- -
Bambu Lab TH Board-A1Bambu Lab TH Board-A1 The Bambu Lab TH Board-A1 is a genuine replacement electronic board designed to manage essential toolhead operations in the Bambu Lab A1 3D printer. It plays a crucial role in controlling and coordinating the toolhead components to ensure smooth and...
- Rs 2,565/-
- Rs 2,565/-
-
Rs 3,299/-
Save Rs 734/- -
Bambu Lab 3.5-inch IPS Capacitive Touchscreen for A1Bambu Lab 3.5-inch IPS Capacitive Touchscreen for A1 The Bambu Lab 3.5-inch IPS Capacitive Touchscreen for A1 is a dedicated control interface designed specifically for the Bambu Lab A1 3D printer. Featuring a 3.5-inch IPS display, it delivers clear visuals and wide viewing angles,...
- Rs 3,265/-
- Rs 3,265/-
-
Rs 4,126/-
Save Rs 861/- -
MKS Robin WiFi Module (V1.0) – ESP8266 Wireless Add-on for Remote 3D Printer ControlMKS TFT-WIFI V1.0 ESP8266 WIFI Module This Wifi module is created and developed by Makerbase team, It is capable of high transmission rate and stability . It is compatible greatly with MKS TFT24, MKS TFT28, MKS TFT32 display screen. It supports document transfer via...
- Rs 709/-
- Rs 709/-
-
Rs 1,399/-
Save Rs 690/- -
Ultrabase 300*300mm 3D Printer Platform Tempered Heated Bed Glass Plate with Microporous CoatingUltrabase 300*300mm 3D Printer Platform Tempered Heated Bed Glass Plate with Microporous Coating This is a high-quality sticker with adhesive backing for the 3d printer builds plates of dimensions 300mm x 300mm. Ultrabase Glass Plate helps you to avoid warping and offers a flat surface. Ultrabase 3D Printer glass plate works perfectly with...
- Rs 1,256/-
- Rs 1,256/-
-
Rs 1,404/-
Save Rs 148/- -
214x214mm Heat Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer214x214mm Heat Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer The Aluminum Heatbed MK3 has features similar to MK2 and you can also operate this board with 12V and 24V two voltage, more practical. It creates an optimal bond between the 3D printed...
- Rs 537/-
- Rs 537/-
-
Rs 599/-
Save Rs 62/- -
Bambu Lab AC Board Replacement Part Compatible with Bambu A1Bambu Lab AC Board Replacement Part Compatible with Bambu A1 The Bambu Lab A1 AC Board is a reliable replacement component designed specifically for the Bambu Lab A1 3D printer. This AC board ensures stable power management and efficient electrical distribution within the printer,...
- Rs 1,625/-
- Rs 1,625/-
-
Rs 1,949/-
Save Rs 324/- -
Bambu Lab Bambu Textured PEI Plate for A1,P1P,P1S,X1C,X1EBambu Lab Bambu Textured PEI Plate for A1, P1P, P1S, X1C, X1E The Bambu Lab Bambu Textured PEI Plate for A1, P1P, P1S, X1C, and X1E is designed to improve the reliability and performance of your 3D printing workflow. Featuring a textured PEI surface...
- Rs 4,495/-
- Rs 4,495/-
-
Rs 5,999/-
Save Rs 1,504/- -
Anycubic Standard Resin White 1kgAnycubic Standard Resin White 1kg | High-Precision UV Resin for LCD & DLP 3D Printers Anycubic Standard Resin is a beginner-friendly photopolymer resin designed for high-precision and reliable 3D printing. With a low 4.5–5.5% volume shrinkage rate, it helps maintain dimensional accuracy and reduce...
- Rs 1,399/-
- Rs 1,399/-
-
Rs 1,749/-
Save Rs 350/-
Best Price Guarantee
Ready Stock for Bulk Purchase
Dedicated Account Managers
5% GST Benefits for Eligible SEZ and Edu
Technical Support Available
1-Year Manufacturer Warranty





















