LCD Display Modules - Touch, Seven-Segment & Parallel Displays – Robocraze

Free Delivery on Orders Above Rs 500/- Pan-India

Cash on Delivery Available for Orders above Rs.500/- and Upto Rs 3000/-

SAVE more when you BUY more. Upto 30% Off on BULK PURCHASE

GST Invoices for Your Business

Dedicated Technical Support Team

Safely Delivering Genuine Products PAN INDIA

Support

Recently Viewed Products

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Buy LCD Display Module Online in India

LCD or liquid crystal display is a type of flat panel display, LCD in its primary operation uses liquid crystals to display the output. In terms of technology, LCDs proved to make a great leap in replacing LED displays ( light-emitting diodes) and gas plasma displays.

Are you looking for an LCD display for your Arduino project or another development board-based project? check out our LCD category to find your desired LCD module; we have a noticeable selection of Seven-segment Displays, Touch screen LCDs, Parallel LCD Displays, and 3.5 in Raspberry Pi LCD Display, 7 in Raspberry Pi display.

If you are searching for an LCD display module with a serial interface or one with I2C communications support, we have all types covered for your needs. Our range includes the popular 1 x 1, 2 x 16, 128x32 graphics, and more in sizes from small form factor to large format options which can be used as computer monitors or embedded platforms. We also provide additional packages based on specific requirements such as mounting hardware & installation services making us a one-stop solution provider when it comes to finding the perfect LCD display for any given application without breaking your budget!

LCD Display Categories

Seven-Segment Displays – Classic numeric modules for showing digits (0–9), timers, counters, voltmeters, and simple status codes. Available as single, dual, and 4-digit units, often driven via TM1637 or MAX7219 driver ICs.
Parallel Character LCDs (e.g. 16×2, 20×4) – HD44780-compatible text LCDs for menus, messages, sensor values, and system status. They can use a direct parallel interface or an I2C adapter for easier wiring.
Touchscreen LCDs / TFT Displays – Full-color graphic displays (SPI or parallel) with optional resistive or capacitive touch, ideal for GUIs, buttons, graphs, and custom control panels.
Raspberry Pi LCDs – Displays designed specifically for Raspberry Pi using HDMI, DSI, or SPI/GPIO. Many include touch support and mounting points for building compact “all-in-one” Pi systems.

Applications: Clocks, Dashboards, IoT Displays & DIY Projects

Digital clocks & timers – Show time, countdowns, alarms, and schedules using seven-segment or character LCDs.
System dashboards – Monitor CPU load, network status, temperature, and sensor data on a dedicated display.
Smart home panels – Use touchscreen LCDs to control lighting, fans, AC, scenes, and view live home data.
IoT sensor displays – Visualize temperature, humidity, gas levels, motion events, and more in real time.
DIY gadgets & educational projects – Build menus, debug screens, and interactive interfaces for Arduino, ESP32 and Raspberry Pi.

Installation & Wiring Guides

Seven-Segment Display Modules (with Driver IC)

Connect VCC and GND to the appropriate 5 V or 3.3 V supply as specified.
Connect data/control pins (e.g. CLK, DIO or DIN/CLK/CS) to digital I/O pins on Arduino or GPIO on Raspberry Pi.
Use a compatible library (TM1637, MAX7219, etc.) to display numbers and characters.

Parallel Character LCDs (16×2, 20×4)

Direct Parallel Connection

Wire RS, E, and data lines D4–D7 to Arduino digital pins.
Connect VCC and GND, and use a potentiometer on the contrast pin (VO).
Connect backlight pins (LED+, LED−) if separate backlight control is required.

With I2C Adapter Board

VCC → 5 V (or 3.3 V if stated on module)
GND → GND
SDA → I2C data (A4 on Arduino Uno / GPIO2 on Raspberry Pi)
SCL → I2C clock (A5 on Arduino Uno / GPIO3 on Raspberry Pi)

Touchscreen / TFT LCDs (SPI)

Connect power pins: VCC and GND to the recommended voltage rail.
Wire SPI pins: SCK, MOSI, MISO, CS, DC, RST to matching SPI and GPIO pins.
Connect touch controller pins (e.g. T_CS, T_IRQ, T_DIN, T_DOUT) to free GPIO pins if touch is used.

Raspberry Pi LCDs (HDMI / DSI)

HDMI LCD

Connect HDMI cable from Raspberry Pi to the display’s HDMI input.
Connect USB cable from Raspberry Pi to the display for touch and/or power (as required by the model).
Use a separate 5 V power adapter for the screen if it needs more current than the Pi’s USB ports can supply.

DSI LCD

Connect the DSI ribbon cable from Raspberry Pi’s DSI port to the display’s DSI connector.
Ensure the ribbon is fully inserted and the locking tabs are closed.
Power the display through the Pi header or separate 5 V input according to product instructions.

Compatibility & Driver Instructions

Arduino & Microcontroller Use

Use the LiquidCrystal or LiquidCrystal_I2C libraries for HD44780 character LCDs.
Use TM1637/MAX7219 libraries for seven-segment display modules.
For TFT and touchscreen displays, use libraries such as Adafruit_GFX, vendor-specific drivers, and matching touch controller libraries.
Always check voltage compatibility (5 V vs 3.3 V) between display and microcontroller.

Raspberry Pi Use

Most HDMI LCDs are plug-and-play for video; touch usually works over USB without extra drivers on common OS images.
For DSI and SPI-based Pi LCDs, follow the product documentation to:
- Add the correct dtoverlay lines in config.txt.
- Install any additional driver packages or run vendor setup scripts if provided.
Verify supported Raspberry Pi models (Pi 3, Pi 4, Pi 5, Pi Zero, etc.) and native resolution for best results.

Troubleshooting & Calibration Tips

Common Display Issues

Blank screen or no image: Check power, ground, and all data/HDMI/DSI cables. Confirm the board is booting correctly.
Garbled or missing characters (character LCDs): Recheck RS, E, D4–D7 wiring and contrast adjustment; ensure code pin mapping matches your wiring.
Backlight on but no text: Slowly adjust the contrast potentiometer and verify initialization code.
Touch not working: Confirm USB or touch pins are connected; install any required touch driver and run calibration tools if touch is offset.

Calibration & Best Practices

Character LCDs: Adjust contrast until text is sharp; follow recommended delays during initialization.
Touchscreen panels: Use the vendor’s calibration tool to align touch points; recalibrate after rotating the display (landscape/portrait).
Raspberry Pi LCDs: Set the correct resolution and rotation in raspi-config or config.txt; disable overscan if content is cut off at the edges.
General care: Keep screens clean using a soft cloth, avoid flexing PCBs or ribbon cables, and provide ventilation in enclosed builds to reduce heat.

Explore the full range of seven-segment displays, character LCDs, touchscreens, and Raspberry Pi LCDs to build clear, user-friendly interfaces for your next electronics, robotics, or IoT project.

Price Chart of LCD Display Modules in India

Product	Prices
16x2 LCD Module (Green)	Rs. 134/-
16x2 LCD I2C Interface Adapter	Rs. 89/-
7? Raspberry Pi LCD Touch Screen Display with Kit HDMI VGA Input Driver Board	Rs. 4388/-
7 inch LCD Capacitive Touch Panel with HDMI + USB Cable	Rs. 4365/-
1.8 inch TFT LCD Module	Rs. 470/-
128x64 Graphic LCD	Rs. 683/-
DSO138 DIY 2.4 inch Oscilloscope Kit	Rs. 1849/-
20x4 Blue LCD Display Module	Rs. 435/-
3.5in LCD Display for Raspberry Pi	Rs. 1057/-

Data last updated on 14/12/2022

Related Searches

TFT LCD Display Module | 7 Segment LED Display | E-Ink Display Module | Capacitive Touch Screen | Display Accessories | Display Module | OLED

Popular Searches

M5Stack | Development Boards | DIY Kits | 3D Printers/Pens | IOT & Wireless | Sensors | Drone Parts | Motors & Mechanical | Displays | Tools & Instruments | Cables & Connectors | Prototyping & Misc | Motor Drivers | Heat Sink

1. What is the difference between LED and LCD?

The main difference between LED and LCD displays is the backlighting technology. LCDs use fluorescent backlights, while LEDs use light-emitting diodes. LED displays typically offer better energy efficiency, superior image quality, higher contrast, and longer lifespan, but are generally more expensive. LCDs are less costly and use mercury, while LEDs are mercury-free and thinner.

2. Why is LCD important?

LCD is important because LCD screens do not use phosphors, they rarely suffer from image burn-in when a static image is displayed on a screen for an extended period of time; however, LCDs are susceptible to image persistence. The LCD screen uses less energy and can be disposed of more safely than a CRT screen. Because of its low electrical power consumption, it can be used in battery-powered electronic equipment more efficiently than a CRT.

3. Can I interface the LCD display with Arduino?

You can interface an LCD to Arduino, as it is compatible with Arduino boards, to get your desired LCD display output on the screen. You can also interface LCD display with Raspberry Pi and Node MCU.

4. What is an LCD display module?

An LCD display module is an electronic display module and has a wide range of applications. As mentioned earlier LCD display modules are most commonly 16*2 type of display module used in various devices and circuits. An LCD module works by using liquid crystals to produce an image. These liquid crystals are embedded into a display screen and are then illuminated using a backlight. The actual LCD display module is made of several layers including polarizing filters and electrodes. The backlight plays an important role in the LCD display module. Without this backlight, the LCD display module will not be able to produce any visible images.

5. What is meant by LCD display?

A liquid crystal display is a flat panel display that uses liquid crystals for its primary display operation. The liquid crystal displays are super-thin technology display screens that are used in laptops, computer screens, cell phones, and portable video games.

6. How LCD works?

An LCD works by using millions of pixels, each made of red, green, and blue subpixels. Liquid crystals control the passage of light from a backlight, rotating polarized light to create images. When voltage is applied, the crystals align to block or allow light, producing colors and shades. LCDs use polarizing filters and can be passive or active matrix, with TFT being a common active type. This technology offers low cost, lightweight design, good brightness, and wide viewing angles.

What types of LCD displays are available?

You’ll find classic character LCDs like 16x2 and 20x4 modules, graphical LCDs for more detailed visuals, and larger touch-screen LCDs for advanced projects. Whether you're building a tiny sensor display or a full UI for a smart device, there are options across sizes and formats.

Are these compatible with Arduino and Raspberry Pi?

Yes. Most of these LCD modules work smoothly with Arduino boards, Raspberry Pi, and other microcontrollers. Many come in versions that support I2C or SPI, making wiring easier and reducing the number of pins you need.

What resolutions do the displays support?

Display resolutions range from simple character grids to detailed pixel matrices like 128x64 graphic displays. Larger touch-screen LCDs provide even higher resolution for crisp visuals and smooth UI interaction.

Can I use these displays for DIY electronics projects?

Absolutely. These displays are widely used in student experiments, hobby builds, robotics interfaces, smart home dashboards, and IoT devices. They’re ideal anytime you want your project to talk back to you instead of blinking mysterious LEDs like a secretive toaster.

Do these modules come with drivers or libraries?

Most popular modules are supported by ready-to-use libraries for Arduino, Raspberry Pi, and other platforms. Many also have open-source code examples and wiring guides, so getting started is more “plug and play” and less “guess and hope.”