-
MK8 Extruder DIY Kit for 3D PrinterMK8 Extruder DIY Kit for 3D Printer - Right hand side The MK8 extruder DIY kit is manufactured with great precision and is made from aluminium alloy material. Using aluminium as the material of manufacture for MK8 extruder kit is a great choice since it...
- Rs. 185
Rs. 284- Rs. 185
- (-35%)
- Unit price
- per
Save Rs. 99 -
Volcano hot end Heater Block/Heating Block for 3D PrinterVolcano hot end Heater Block/Heating Block for 3D Printer This is the specialised heater block for Volcano upgrade pack. Compatible with all Volcano Nozzles and all HotEnds except Cyclops. This block uses the same clamped thermistor mounting configuration as the E3D-v6 Heater Block for...
- Rs. 77
Rs. 90- Rs. 77
- (-14%)
- Unit price
- per
Save Rs. 13 -
PC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fittingPC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fitting The PC6-01 Pneumatic Push in Bowden Extruder for 3 mm J-Head fitting is a small part that connects the PTFE tubing to 1.75 mm Filament extruder assemblies on 3D Printers. It is compatible with the standard up to...
- Rs. 29
Rs. 33- Rs. 29
- (-12%)
- Unit price
- per
Save Rs. 4 -
Extruder Kit Left Side Upgraded Red MK8 All Metal Bowden for 1.75mm FilamentExtruder Kit Left Side Upgraded Red MK8 All Metal Bowden for 1.75mm Filament Enhanced 3D Printer Extruder Replacement Kit - Suitable for Ender-3 PRO,Tornado,CR-10,CR-10S. Easy to install, unscrew the old original plastic extruder and screw in the new metal extruder and ready to print....
- Rs. 427
Rs. 649- Rs. 427
- (-34%)
- Unit price
- per
Save Rs. 222 -
MK8 Extruder for 3D printersMK8 Extruder for 3D printers The MK8 extruder features outstanding quality and ensures better performance for 3D printers. The MK8 extruder is manufactured with a V design which makes it convenient for users to load the filament right to the end of the barrel. This extruder...
- Rs. 1,272
Rs. 2,009- Rs. 1,272
- (-37%)
- Unit price
- per
Save Rs. 737 -
Short Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right ShortShort Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right Short This is a high quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user....
- Rs. 190
Rs. 313- Rs. 190
- (-39%)
- Unit price
- per
Save Rs. 123 -
V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm FilamentV6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament This is a V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament. It comes with a PTFE...
- Rs. 30
Rs. 43- Rs. 30
- (-30%)
- Unit price
- per
Save Rs. 13 -
V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm FilamentV6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament. It comes with...
- Rs. 39
Rs. 43- Rs. 39
- (-9%)
- Unit price
- per
Save Rs. 4 -
3D Printer 2 in 1 J-Head Heat Sink V6 Extruder Double Head Aluminum Block Heatsink for E3d 3D Printer3D Printer 2 in 1 J-Head Heat Sink V6 Extruder Double Head Aluminum Block Heatsink for E3d 3D Printer All-metal Cyclops and Chimera Dual Multi-extrusion v5 v6 HotEnd Double nozzle Head. These extrusion block with heatsink can be integrated with any 3D printer giving...
- Rs. 155
Rs. 276- Rs. 155
- (-44%)
- Unit price
- per
Save Rs. 121 -
V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 3.00 mm FilamentV6 Bowden Heat Break Hotend Throat Without Teflon Tube for 3.00 mm Filament This is a V6 Bowden Heat Break Hotend Throat With out Teflon Tube for 3.00 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament. The heat break...
- Rs. 39
Rs. 44- Rs. 39
- (-11%)
- Unit price
- per
Save Rs. 5 -
E3D V6 All Metal J-head with Fan for 1.75 mm filament 0.2 mm Nozzle Extruder for 3D PrintersE3D V6 All Metal J-head with Fan for 1.75 mm filament 0.2 mm Nozzle Extruder for 3D Printers The v6 HotEnd allows you to print a wide variety of materials, from soft and flexible to sturdy and strong. This is possible due to the PTFE...
- Rs. 542
Rs. 849- Rs. 542
- (-36%)
- Unit price
- per
Save Rs. 307 -
3D INKJET E3D V6 J-head Extruder Kit3D INKJET E3D V6 J-head Extruder Kit The 3D extruder is the part of the 3D printer that ejects material in liquid or semi-liquid form in order to deposit it in successive layers within the 3D printing volume. Extruder is considered as one of the important components of a 3D printer. It is...
- Rs. 575
Rs. 750- Rs. 575
- (-23%)
- Unit price
- per
Save Rs. 175 -
V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm FilamentV5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament. The heat break has a shoulder...
- Rs. 32
Rs. 39- Rs. 32
- (-18%)
- Unit price
- per
Save Rs. 7 -
Extruder Kit Right Side Upgraded Red MK8 All Metal Bowden for 1.75mm FilamentExtruder Kit Right Side Upgraded Red MK8 All Metal Bowden for 1.75mm Filament Enhanced 3D Printer Extruder Replacement Kit - Suitable for Ender-3 PRO,Tornado,CR-10,CR-10S. Easy to install, unscrew the old original plastic extruder and screw in the new metal extruder and ready to print....
- Rs. 290
Rs. 444- Rs. 290
- (-35%)
- Unit price
- per
Save Rs. 154 -
V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm FilamentV5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V5 hot end for a 3mm filament. It comes with...
- Rs. 34
Rs. 43- Rs. 34
- (-21%)
- Unit price
- per
Save Rs. 9 -
Extruder Kit Left Side MK8 Aluminum 3D Printer BlockExtruder Kit Left Side MK8 Aluminum 3D Printer Block This is a high quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user. Since this is a...
- Rs. 185
Rs. 313- Rs. 185
- (-41%)
- Unit price
- per
Save Rs. 128 -
V6 Bowden Heat Break Hotend Throat With Teflon Tube for 1.75mm FilamentV6 Bowden Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament This 3D printer throat nozzle is made of high grade material, which is not easy to break or rust, and also heat-resistant. The 3D printer feeding tube is easy to install, not requiring...
- Rs. 35
Rs. 54- Rs. 35
- (-35%)
- Unit price
- per
Save Rs. 19 -
Aluminium Hot End Heating Block MK8 For 3D PrintersAluminium Hot End Heating Block MK8 For 3D Printers Heat block MK8 is a 3D printer’s is the part of the extruder so the nozzle meets the thermal barrier tube. Contained within the block is also the heater cartridge and thermocouple was typically made of aluminum in...
- Rs. 47
Rs. 56- Rs. 47
- (-16%)
- Unit price
- per
Save Rs. 9 -
Aluminium Heat Block for E3D V6 J-head 3D PrinterAluminium Heat Block for E3D V6 J-head 3D Printer This New V6 Heating Block Compatible with the PT100 sensor allows you to use our new thermistor cartridges, as well as high temperature, high accuracy PT100 temperature sensors. These are the newer version of the Volcano...
- Rs. 48
Rs. 65- Rs. 48
- (-26%)
- Unit price
- per
Save Rs. 17 -
E3D Aluminium J-Head Hotend RepRap Extruder for 3D PrintersE3D Aluminium J-Head Hotend RepRap Extruder for 3D Printers The 3D Printer Aluminium Assembled Extruder J-Head Hotend RepRap is used to print filament in the 3D printer. Build onto signature high-temperature performance that allows you to print high-temperature material. the product is now focused on...
- Rs. 353
Rs. 585- Rs. 353
- (-40%)
- Unit price
- per
Save Rs. 232
Extruders & Heat Blocks Price In India
| Product | Price |
| Rs. 283 | |
E3D V6 All Metal J-head with Fan for 1.75 mm filament 0.2 mm Nozzle Extruder | Rs. 744 |
| Rs. 750 | |
| Rs. 650 | |
| Rs. 1,795 |
FAQs:
1. How hot does a 3D printer extruder get?
- The standard temperature of the extruder motor without housing is about 45-70°C. Filament coming out of the extruder can be between 190 and 310 degrees Celsius. While the plastic is still hot, it becomes pliable and can be easily molded into different shapes. However, it hardens quickly when cooled and retains its shape.
2. How hot should extruder be?
- The normal temperature of the 3D printer Extruder should be in the range of 180-230 °C or 356 - 446 F.
3. What happens if extruder is too hot?
- If you`re printing with any filament, when it gets too hot, you'll see stringing and blobs due to the fact the cloth is getting runny and exiting the nozzle in an out of control manner. Because it is out of control, you'll additionally probably see artifacts displaying up to your prints. If your layers are not adhering to 1 another, heating up your warm quit can commonly restore it, however be careful: If the extruder is just too warm, the PLA filament can turn out to be more tender and flimsy. This can reason your prints to be messy.
Other Categories
3D Pens | DIY 3D Printers | Filaments | Mechanical Accessories | Electronic Accessories
Popular Searches
Raspberry Pi | M5Stack | Development Boards | DIY Kits | 3D Printers/Pens | Arduino | Sensors | Electronic Components | Drones/UAV | Motors & Mechanical | Displays | Batteries & Power Supply | Tools & Instruments | Cables & Connectors | Prototyping & Misc | Types of Sensors in IoT | Raspberry Pi vs Beaglebone | Eye Blink Sensor
