-
ISD1820 3-5V Voice Module Recording And Playback Module with Microphone and 0.5W SpeakerISD1820 3-5V Voice Module Recording And Playback Module with Microphone and 0.5W Speaker The ISD1820 Recording Module Voice Board is the real easy way to add Voice Recording (and Playback) to your project. The Module can be operated directly by using the 3 Push-Buttons...
- Rs 159/-
- Rs 159/-
-
Rs 249/-
Save Rs 90/- -
8 Ohm 0.5W Speaker8 Ohm 0.5W Speaker The 8 Ohm 0.5W Speaker is a compact 40mm diameter audio output device designed for low-power applications requiring an 8 Ω impedance and a maximum power handling of 0.5 watt. Its lightweight metal body makes it easy to mount in...
- Rs 54/-
- Rs 54/-
-
Rs 99/-
Save Rs 45/- -
3W 4 Ohm 2 Inch Full Range Stereo Audio Speaker Woofer3W 4 Ohm 2 Inch Full Range Stereo Audio Speaker Woofer The 3W 4 Ohm 2 Inch Full Range Stereo Audio Speaker Woofer is a compact, high-performance speaker designed to deliver clear and balanced sound for a wide range of audio applications. With a...
- Rs 124/-
- Rs 124/-
-
Rs 199/-
Save Rs 75/- -
Seeed Studio reSpeaker XMOS XVF3800 – AI 4-Mic Array for Clear Voice in Noisy EnvironmentsSeeed Studio reSpeaker XMOS XVF3800 – AI 4-Mic Array for Clear Voice in Noisy Environments The Seeed Studio reSpeaker XMOS XVF3800 – AI 4-Mic Array is a professional voice processing solution designed to deliver clear and reliable voice capture even in noisy surroundings. Powered...
- Rs 6,249/-
- Rs 6,249/-
-
Rs 6,899/-
Save Rs 650/-
Speaker Modules for Electronics & DIY Projects
Speaker Modules for Electronics & DIY Projects
Featured Products
2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis
2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis 2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis! This innovative DIY robot car kit allows you to build your very own smart robot car with ease....
- Rs 309/-
- Rs 309/-
-
Rs 450/-
Save Rs 141/-
6 in 1 Rechargeable Solar Power DIY Robots Kit
6 in 1 Rechargeable DIY Solar System Kit This DIY solar kit will teach your child the benefits of solar energy while they build a toy that is fun to play with and does not require batteries! This excellent beginner DIY solar system kit...
- Rs 439/-
- Rs 439/-
-
Rs 574/-
Save Rs 135/-
DIY D2-5 Intelligent Tracking Line Car Kit
DIY D2-5 Intelligent Tracking Line Car Kit LM393 at any time compared the size of two photosensitive resistors when there is an imbalance (such as one side of the black runway) immediately control the side of the motor stop, the other side of the...
- Rs 289/-
- Rs 289/-
-
Rs 399/-
Save Rs 110/-
Sound Output Specifications (Impedance, Wattage & Diameter)
| Specification | Typical Values | What It Means |
|---|---|---|
| Impedance (Ohms) | 4 Ω, 6 Ω, 8 Ω | Lower value draws more current from the amplifier; match with amp output. :contentReference[oaicite:0]{index=0} |
| Wattage (RMS / Peak) | 1 W – 300 W+ depending on size | RMS = continuous power the speaker can handle; Peak = short bursts. :contentReference[oaicite:1]{index=1} |
| Driver Diameter | 50 mm, 100 mm, 150 mm, 300 mm+ | Larger diameter typically means better bass and higher output. :contentReference[oaicite:2]{index=2} |
Pairing Guide: Connecting Speakers with PAM Amplifier
- Check speaker impedance: e.g., 4 Ω or 8 Ω.
- Select amplifier module that supports that impedance and required power.
- Connect amplifier output: Amp OUT+ → Speaker +, Amp OUT– → Speaker –.
- Provide amplifier with proper power supply: e.g., 9 V or 12 V for mini modules.
- Connect audio source (phone, PC, media board) to amplifier input and adjust volume gradually.
- Test at low volume first to ensure speaker handles power without distortion.
Project Guide: Build Your Own Bluetooth Speaker
- Choose a speaker driver: for example, 100mm diameter 8 Ω 20W.
- Pick a Bluetooth audio receiver board with amplifier or pair with PAM8610 module.
- Design or reuse an enclosure sized for your driver — ensure proper ventilation and secure mounting.
- Wire the amplifier module to power supply (e.g., 12 V battery or 12 V adapter), audio input from Bluetooth board, and output to speaker.
- Install volume control and optional tone controls, power switch, and battery/charging circuit (if portable).
- Test the speaker with music, gradually increase volume and listen for clarity and bass response.
- Refine enclosure design for better bass (add internal bracing, port, damping foam if needed).
Comparison Chart: Mini vs Large Speakers
| Feature | Mini Speaker (50–100 mm) | Large Speaker (150 mm+) |
|---|---|---|
| Impedance | Typically 4 Ω or 8 Ω | Often 4 Ω or 8 Ω, designed for higher wattage |
| Power Handling | 1 W – 20 W | 20 W – 300 W+ depending on design |
| Driver Diameter | About 50–100 mm | 150 mm and above |
| Typical Use Case | Desktop speakers, portable Bluetooth boxes, near-field | Home theater, floor-standing, PA systems |
| Bass Response | Limited deep bass — often needs subwoofer | Better bass, greater sound pressure level |
Other Categories
Buzzers | Microphones | Amplifiers
Popular Searches
Arduino | M5Stack | Development Boards | DIY Kits | 3D Printers/Pens | IOT & Wireless | Sensors | Electronic Components | Drones/UAV | Motors & Mechanical | Displays | Batteries & Power Supply | Tools & Instruments | Cables & Connectors | Prototyping & Misc
1. What are speaker modules used for?
Speaker modules are essential for adding audio output to electronic projects. They convert electrical audio signals into audible sound, making them perfect for creating custom alarms, adding voice feedback to robots, or building a portable music player. These compact modules simplify integrating sound into devices like Arduino or Raspberry Pi, providing a complete and easy-to-use audio solution.
2. Which speaker module is best for Arduino projects?
For most Arduino projects, a simple 8-ohm speaker module is a great starting point for basic tones and alerts. For better volume and clarity, consider a module with a built-in amplifier, like the popular PAM8403. It's power-efficient and easy to interface with Arduino's digital pins, making it a versatile choice for projects that need more than just simple beeps.
3. Can I connect a speaker directly to an amplifier module?
Absolutely. Amplifier modules are designed specifically to drive speakers. You connect the amplifier's output terminals directly to the corresponding terminals on your speaker. For optimal performance and to prevent damage, ensure the speaker's impedance (e.g., 4 or 8 ohms) and power rating match the specifications of your amplifier module. This matching is key to clear, undistorted sound.
4. What sizes of speaker modules are available?
Speaker modules come in a wide range of sizes to fit any project. You can find very small speakers, often around 20mm to 40mm in diameter, perfect for compact wearables or robotics. Larger modules, from 50mm (2 inches) up to 77mm (3 inches) and beyond, are also common, offering better bass response and higher volume for more powerful audio applications.
5. How do I improve audio clarity in my DIY project?
To improve audio clarity, start with a clean power supply to minimize hum and distortion. Use a suitable amplifier module that matches your speaker's power rating and impedance. Placing the speaker in a properly sized enclosure will dramatically enhance bass and overall richness. Lastly, use shielded cables for audio signals to protect them from electrical interference from other project components.
- Choosing a selection results in a full page refresh.
Chat
