Buck Boost Converters – Step Up & Step Down Modules

Free Delivery on Orders Above Rs 999/- Pan-India

Cash on Delivery Available for Orders above Rs.500/- and Upto Rs 3000/-

SAVE more when you BUY more. Upto 30% Off on BULK PURCHASE

GST Invoices for Your Business

Dedicated Technical Support Team

Safely Delivering Genuine Products PAN INDIA

Support | Careers

Explore Buck Boost for Real Projects

Many people get stuck because they don’t know which buck boost will actually work. In this collection, we have gathered useful buck boost that are commonly used in real electronics and robotics projects. You don’t have to guess anymore. Take your time, look around, and choose the buck boost that fits your project best.

A DC buck boost converter is a type of DC-DC power converter. It is used to either step up (boost) or step down (buck) an input voltage to provide a stable output voltage. A buck boost converter is used in applications where the input voltage may fluctuate above or below the desired output voltage.

The working of a buck and boost converter involves two main phases: When the switch is on, current flows through the inductor, storing energy in its magnetic field. When the switch turns off, the inductor releases this energy through the diode to the output, either raising or lowering the voltage as needed. By adjusting the ratio of on/off time (duty cycle), the buck boost transformer precisely controls the output voltage regardless of variations in the input.

buck boost modules are used in wide range of devices. These could be battery-powered devices, portable electronics, and renewable energy systems, where the supply voltage can vary widely.

Some of the popular buck-boost converter modules available on Robocraze include the LM2596 & XL6009 DC-DC Adjustable Step-Up and Step-Down Power Supply Module, which offers both buck and boost functionality with a wide input range of 3.5V to 28V and an adjustable output from 1.25V to 26V.

Another widely used voltage booster option is the LM2596S & LM2577S DC-DC Adjustable Step-Up and Step-Down Power Supply Module, which combines the LM2596 and LM2577 chips to efficiently provide output voltages higher or lower than the input.

Buck Boost Converter: Flexible Voltage Regulation for Modern DC-DC Systems

A buck boost converter is a versatile type of DC-DC converter designed to deliver a stable output voltage even when the input voltage fluctuates. Unlike traditional converters that either step voltage up or down, this topology combines both functions—allowing it to produce an output voltage that is either higher or lower than the input.

In practical applications, this flexibility becomes essential, especially in battery-powered systems where voltage continuously drops during discharge. The converter operates by storing energy in an inductor during the switching cycle and releasing it to the load, with the output voltage controlled through pulse-width modulation (PWM). This mechanism ensures efficient energy transfer and stable performance.

Because of their high efficiency and adaptability, buck boost DC-DC converters are widely used in IoT devices, embedded systems, and portable electronics. They help maintain consistent voltage levels, protect sensitive components, and improve overall system reliability—making them a core building block in modern power electronics design.

Why Buck Boost DC-DC Converters Are Essential in Electronics Projects

In real-world electronics, input voltage is rarely constant, which makes a standard DC-DC converter insufficient in many cases. A buck boost converter solves this limitation by automatically adjusting to varying input conditions while maintaining a regulated output voltage. This makes it particularly valuable in applications such as robotics, drones, and renewable energy systems.

One of the key advantages of using a buck boost converter is its ability to maximize energy utilization. For instance, in lithium-ion battery systems, the voltage may start higher than required and later drop below the desired level. Instead of wasting energy or shutting down early, the converter ensures continuous operation by switching between buck (step-down) and boost (step-up) modes seamlessly.

Additionally, modern buck boost converters offer high efficiency (often above 90%), compact designs, and minimal heat generation compared to linear regulators. This makes them ideal for space-constrained and energy-sensitive projects. Whether you're building DIY electronics or industrial-grade systems, integrating a buck boost DC-DC converter significantly enhances performance, stability, and power management efficiency.

Buck-Boost Converter Design and Working Principles

A Buck-Boost Converter is a DC-DC converter that can either increase (boost) or decrease (buck) the input voltage to maintain a stable output. It operates using pulse-width modulation (PWM), which controls how long the transistor (or MOSFET) remains ON or OFF during each switching cycle. This ability makes it extremely useful in circuits where the supply voltage varies — such as battery-powered devices or solar systems.

Main Components

E (Input Source): Provides the supply voltage to the converter.
S (Switch): A transistor or MOSFET that controls the current flow.
L (Inductor): Stores energy in its magnetic field during the ON phase.
D (Diode): Directs current to the load during the OFF phase.
C (Capacitor): Filters and smooths the output voltage.
U (Output Voltage): Represents the regulated DC voltage delivered across the load resistor (R).
R (Load): Represents the connected circuit or device receiving power.

Working Operation

The converter works in two main phases during each switching cycle:

When the Switch (S) is ON

The MOSFET conducts and connects the inductor directly to the input voltage.
The inductor stores energy by building a magnetic field.
The diode (D) becomes reverse-biased and blocks current flow to the load.
The capacitor supplies power to the load during this time.

When the Switch (S) is OFF

The MOSFET turns off, breaking the connection to the input source.
The magnetic field in the inductor collapses, releasing stored energy.
The diode (D) becomes forward-biased and allows current to flow to the load.
The capacitor charges and smooths the voltage output.

DIY Electronics & Robotics Applications

Arduino & Microcontroller Projects: Maintain a steady voltage for boards like Arduino, ESP32, and Raspberry Pi even when battery levels fluctuate.
Portable & Battery-Powered Devices: Use buck-boost converters to stabilize voltage in rechargeable battery circuits (e.g., 3.7V Li-ion to 5V USB output).
Robotics Systems: Power DC motors, sensors, and controllers that require different voltage levels from a single battery source.
IoT & Embedded Devices: Ensure reliable operation for wireless sensors and modules with varying input voltages.
Educational Kits & Prototyping: Ideal for students and makers to learn about power regulation and circuit efficiency in hands-on projects.

Prices of Buck Converter Modules in India

Buck Converter	Price
MP1584EN Mini LM2596 ultra-small DC-DC step-down	₹49/-
LM2596 Mini 360 Aircraft Power Supply Step-down Module	₹54/-
LM2596 DC-DC Buck Module	₹58/-

Prices of Boost Converter Modules in India

Types of Boost Converter Module	Price
0.9V-5V to 5V DC-DC USB Step Up Power Boost Converter Module	₹37/-
LM2577 DC-DC Step-up Power Converter Module	₹193/-
150W Dc-Dc Boost Adjustable Power Converter	₹178/-

Prices of Buck and Boost converters in India

Type	Price
LM2596 & XL6009 DC-DC Adjustable Step-Up and step-down Power Supply Module boost and buck voltage converter	₹ 355/-

Related Searches

Popular Searches

1. What is a Buck Converter?

A buck converter is a type of DC-to-DC converter that lowers the voltage from input to output and increases the current. It's a type of power supply that is more efficient than linear regulators. The buck converter works by regulating the current in an inductor using two switches, usually a transistor and a diode or two transistors. The switches are controlled by a pulse-width modulation signal to adjust the output voltage. Upon closing the switch, the inductor stores the energy from the input voltage. Then, upon opening the switch, the stored energy is discharged to the output load. The duty cycle of the PWM signal controls the output voltage. Buck converters are commonly used in electronic devices like USB, DRAM, and CPUs to reduce the input voltage to a level required by the load. They are also used in battery-powered devices with various battery chemistries. Overall, buck converters are a widely used and efficient type of DC-to-DC converter that can lower voltage while increasing current.

2. What is a Boost Converter?

A boost converter, also known as a step-up converter, is a DC-to-DC power converter that increases voltage from input to output while decreasing current. This type of switched-mode power supply incorporates at least two semiconductors, a diode, and a transistor. A boost converter can be powered by various DC sources, including batteries, solar panels, rectifiers, and DC generators. The term "step-up converter" derives from the fact that the output voltage of a boost converter is higher than the source voltage. Boost converters are widely used in a variety of applications, such as battery-powered devices, LED drivers, and electronic power supplies. They are also utilized in renewable energy systems to increase voltage for grid usage or storage. Boost converters are highly effective and dependable, which accounts for their popularity.

3. What is buck converter used for?

A buck converter, which is also referred to as a step-down converter, alters the voltage from its input to its output, while concurrently amplifying the current. The main aim of a buck converter is to transform a high voltage to a lower voltage with efficiency. This enhances the life of batteries, diminishes heat production, and enables the creation of more compact devices. Buck converters are widely utilized in an array of applications, such as power supplies, electronic devices, and solar panels, among other things.

4. What is buck converter working principle?

A buck converter uses inductive switching to step down voltage and step up current. It involves four stages: MOSFET switch on, inductor stores energy; MOSFET switch off, inductor discharges energy; diode on, current flows to load; diode off, process repeats. High-frequency MOSFET switching helps maintain a stable output voltage despite input or load variations.

5. Is buck converter AC or DC?

A buck converter is a DC-to-DC converter that lowers the voltage from its input to its output. It belongs to the family of switched-mode power supplies, which are designed to effectively transform direct current voltage. As a result, a buck converter converts DC power and not AC power.

6. What is a boost converter used for?

A boost converter is a type of switch mode converter that increases voltage levels. It's commonly used in various applications, such as in hybrid electric vehicles and portable electronic devices. Boost converters are simple and consist of an inductor, a semiconductor switch, a diode, and a capacitor, with the switch usually being a high-performance MOSFET. They're also used in renewable energy systems to convert DC voltage from solar panels to higher levels for battery charging or grid connection.

7. Why MOSFET is used in boost converter?

MOSFETs are a popular choice for boost converters because they can handle high voltages and currents while also offering high efficiency and fast switching speeds. The MOSFET functions as a switch, regulating the current passing through the inductor in order to accumulate energy from the input voltage and transport it to the output capacitor, thereby elevating the output voltage. In comparison to other transistor varieties, MOSFETs possess reduced voltage drop and switching losses, rendering them more effective for high-power applications.

8. What is the difference between boost converter and transformer?

Boost converters and transformers increase voltage levels but operate differently. A boost converter uses an inductor, switch, diode, and capacitor to increase DC voltage. A transformer uses coils wrapped around a magnetic core to transfer power between different voltage levels in AC circuits. Boost converters are used in DC circuits, while transformers are used in AC circuits. Boost converters are smaller and lighter, making them suitable for portable applications.

9. What does a buck-boost converter do?

A buck-boost converter, also called a chopper, can change the output voltage to be greater or lesser than the input voltage. It works as a DC-DC Step-Up or Step-Down converter based on duty cycle, D. The converter uses a solid-state device and a diode in reverse to the input voltage source. It has two topologies and can charge a system quickly but there is a risk of overheating as the system reaches maximum capacity. Both topologies are equivalent to a flyback converter using a single inductor instead of a transformer.

10. Where is buck-boost converter used?

Buck-boost converters are utilized to generate a steady direct current output voltage from an unstable direct current input voltage source. They find widespread application in various fields, including USB on the go, point of load converters for computers and laptops, battery chargers, quadcopters, solar chargers, power audio amplifiers, self-regulating power supplies, consumer electronics, and battery power systems. The "boost" component of the buck-boost converter is utilized to amplify the input voltage to generate an output voltage higher than the input voltage.

All Categories

Buck Boost Converters – Step Up & Step Down Modules

Categories

Refined By Clear all

Availability

Price

Featured Products

Explore Buck Boost for Real Projects

All About Buck Boost Converters – Step Up & Step Down Modules

Buck Boost Converter: Flexible Voltage Regulation for Modern DC-DC Systems

Why Buck Boost DC-DC Converters Are Essential in Electronics Projects

Buck-Boost Converter Design and Working Principles

Main Components

Working Operation

When the Switch (S) is ON

When the Switch (S) is OFF

DIY Electronics & Robotics Applications

Prices of Buck Converter Modules in India

Prices of Boost Converter Modules in India

Prices of Buck and Boost converters in India

Frequently Asked Questions

1. What is a Buck Converter?

2. What is a Boost Converter?

3. What is buck converter used for?

4. What is buck converter working principle?

5. Is buck converter AC or DC?

6. What is a boost converter used for?

7. Why MOSFET is used in boost converter?

8. What is the difference between boost converter and transformer?

9. What does a buck-boost converter do?

10. Where is buck-boost converter used?

Let customers speak for us

All Categories

Buck Boost Converters – Step Up & Step Down Modules

Categories

Refined By Clear all

Availability

Price

Featured Products

Sort by:

Explore Buck Boost for Real Projects

All About Buck Boost Converters – Step Up & Step Down Modules

Buck Boost Converter: Flexible Voltage Regulation for Modern DC-DC Systems

Why Buck Boost DC-DC Converters Are Essential in Electronics Projects

Buck-Boost Converter Design and Working Principles

Main Components

Working Operation

When the Switch (S) is ON

When the Switch (S) is OFF

DIY Electronics & Robotics Applications

Prices of Buck Converter Modules in India

Prices of Boost Converter Modules in India

Prices of Buck and Boost converters in India

Frequently Asked Questions

1. What is a Buck Converter?

2. What is a Boost Converter?

3. What is buck converter used for?

4. What is buck converter working principle?

5. Is buck converter AC or DC?

6. What is a boost converter used for?

7. Why MOSFET is used in boost converter?

8. What is the difference between boost converter and transformer?

9. What does a buck-boost converter do?

10. Where is buck-boost converter used?

Sign up for our newsletter

Shop the look

Choose Options

Edit Option

Back In Stock Notification

Compare

Choose Options

Let customers speak for us