-
MK8 Extruder DIY Kit for 3D PrinterMK8 Extruder DIY Kit for 3D Printer - Right hand side The MK8 extruder DIY kit is manufactured with great precision and is made from aluminium alloy material. Using aluminium as the material of manufacture for MK8 extruder kit is a great choice since it...
- Rs. 185
Rs. 284- Rs. 185
- Unit price
- per
Save Rs. 99 -
SC16UU Linear Bearing (16 mm)SC16UU Linear Bearing (16 mm) SCS16UU 16mm Metal Linear Bearing Block Unit For CNC is made from New solid polymer material of lightweight and good wear resistance. It is perfect to replace the traditional linear motion ball bearing and widely applied in the 3D...
- Rs. 338
Rs. 499- Rs. 338
- Unit price
- per
Save Rs. 161 -
Bluetooth 5.0 Dual Mode BLE (Feasycom)Bluetooth 5.0 Dual Mode BLE (Feasycom) The Bluetooth 5.0 Dual Mode BLE (Feasycom) is a high-performance, highly integrated Bluetooth 5.0 BR/EDR/BLE dual-mode module. It operates on the 2400MHz to 2480Mhz ISM frequency band and has a low power consumption of 5mA working current. It...
- Rs. 436
Rs. 599- Rs. 436
- Unit price
- per
Save Rs. 163 -
Multitec MT-02DX+ StripperMultitec MT-02DX+ Stripper The Multitec MT-02DX+ Stripper is an improved version of the Self Adjusting Cutter/Stripper with improved functionality and design. This is a unique tool for stripping and cutting insulation any types of wires with diameters ranging from 0.5mm to 6mm. This tool is self-adjustable and does...
- Rs. 300
Rs. 400- Rs. 300
- Unit price
- per
Save Rs. 100 -
GT 2 Timing Belt Pulley 6.35mm Bore Width 10mm for RepRap 3D PrinterGT 2 Timing Belt Pulley 6.35mm Bore Width 10mm for RepRap 3D Printer Aluminum 20T GT2 pulley has high quality shiny surface appearance and robust construction. GT2 timing belt system especially suited for linear movement and positioning applications such as 3D printer, CNC and other...
- Rs. 53
Rs. 74- Rs. 53
- Unit price
- per
Save Rs. 21 -
3D Printer - LCD 2004 Graphic Smart Display3D Printer - LCD 2004 Graphic Smart Display The intelligent controller includes an sd card reader, rotary encoders and a 20-character — 4 line lcd display. You can easily connect it to your ramps 1. 4 Board using "smart adapter" included. This panel connect...
- Rs. 522
Rs. 726- Rs. 522
- Unit price
- per
Save Rs. 204 -
Extruder Kit Left Side Upgraded Red MK8 All Metal Bowden for 1.75mm FilamentExtruder Kit Left Side Upgraded Red MK8 All Metal Bowden for 1.75mm Filament Enhanced 3D Printer Extruder Replacement Kit - Suitable for Ender-3 PRO,Tornado,CR-10,CR-10S. Easy to install, unscrew the old original plastic extruder and screw in the new metal extruder and ready to print....
- Rs. 440
Rs. 649- Rs. 440
- Unit price
- per
Save Rs. 209 -
GT2-6mm Belt Width 36 Teeth 6.35mm Bore Timing PulleyGT2-6mm Belt Width 36 Teeth 6.35mm Bore Timing Pulley GT2-6mm Belt Width 36 Teeth 6.35mm Bore Timing Pulley is the basic element of the system transmitting power to the moving parts of the machine. Some are made of high-quality aluminum. It will find its...
- Rs. 146
Rs. 199- Rs. 146
- Unit price
- per
Save Rs. 53 -
Multitec MT-02DX Wire StripperMultitec MT-02DX Wire Stripper The Multitec MT-02DX Stripper is an improved version of the Self Adjusting Cutter/Stripper with improved functionality and design. This is a unique tool for stripping and cutting insulation any types of wires with diameters ranging from 0.2mm to 6mm. This tool is self-adjustable and...
- Rs. 280
Rs. 365- Rs. 280
- Unit price
- per
Save Rs. 85 -
20K Cermet(Pack of 5)20K ohm Cermet Preset Potentiometer (Pack of 5) Cermet preset is a compact variable resistor and PCB mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated. The Variable resistors are used for variating voltage as per the need...
- Rs. 20
Rs. 24- Rs. 20
- Unit price
- per
Save Rs. 4 -
5K Cermet(Pack of 5)5K ohm Cermet Preset Potentiometer (Pack of 5) Cermet preset is a compact variable resistor and PCB mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated. The Variable resistors are used for variating voltage as per the need...
- Rs. 20
Rs. 22- Rs. 20
- Unit price
- per
Save Rs. 2 -
2.4 inch HMI UART DWIN IPS Display2.4inch 320x240 Resistive touch Display 2.4inch 320x240 Resistive touch Display is the go-to solution for projects requiring a reliable touch display. The resistive touch screen, vibrant 262K colors, and 320*240 pixel resolution provide a clear and precise interface. With a lightweight design of 35g,...
- Rs. 1,245
Rs. 1,999- Rs. 1,245
- Unit price
- per
Save Rs. 754 -
Aluminum Heat Sink for Raspberry Pi Zero 2WAluminum Heat Sink for Raspberry Pi Zero 2W The Aluminium Heat Sink for Raspberry Pi is a heat sink kit made of aluminum that is used to cool the chip's microprocessor. The heat sink is attached with thermally conductive adhesive tape, which helps in...
- Rs. 13
Rs. 19- Rs. 13
- Unit price
- per
Save Rs. 6 -
Volcano hot end Heater Block/Heating Block for 3D PrinterVolcano hot end Heater Block/Heating Block for 3D Printer This is the specialised heater block for Volcano upgrade pack. Compatible with all Volcano Nozzles and all HotEnds except Cyclops. This block uses the same clamped thermistor mounting configuration as the E3D-v6 Heater Block for...
- Rs. 79
Rs. 90- Rs. 79
- Unit price
- per
Save Rs. 11 -
Short Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right ShortShort Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right Short This is a high quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user....
- Rs. 190
Rs. 313- Rs. 190
- Unit price
- per
Save Rs. 123 -
PC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fittingPC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fitting The PC6-01 Pneumatic Push in Bowden Extruder for 3 mm J-Head fitting is a small part that connects the PTFE tubing to 1.75 mm Filament extruder assemblies on 3D Printers. It is compatible with the standard up to...
- Rs. 29
Rs. 33- Rs. 29
- Unit price
- per
Save Rs. 4 -
3D Printer Parts Spring For Heated bed MK3 CR-10 Hotbed (Yellow)3D Printer Parts Spring For Heated bed MK3 CR-10 Hotbed (Yellow) This is an imported spring for the heat bed of an MK3 3D printer. This spring gives good stiffness to the bed of the 3D printer and doesn’t allow the printer bed to...
- Rs. 21
Rs. 26- Rs. 21
- Unit price
- per
Save Rs. 5 -
1M Cermet(Pack of 5)1M ohm Cermet Preset Potentiometer (Pack of 5) Cermet preset is a compact variable resistor and PCB mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated. The Variable resistors are used for variating voltage as per the need...
- Rs. 20
Rs. 22- Rs. 20
- Unit price
- per
Save Rs. 2 -
Witty Fox 11.1V 2000mAh Li-Ion BatteryWitty Fox 11.1V 2000mAh Li-Ion Battery The lithium-ion rechargeable batteries are widely used in GPS, DVD, Tablet PC, MP4 Player, Power Bank, Mobile Backup Power Supply, Bluetooth Speaker, IOT, and Industrial applications. FEATURES: Pack over-voltage Protection Pack under-voltage Protection Over voltage Protection, CELL Under-voltage Protection,...
- Rs. 503
Rs. 746- Rs. 503
- Unit price
- per
Save Rs. 243 -
Raspberry Pi 4 Case Red & White(Chinese)Raspberry Pi 4 Case Red & White(Chinese) Ensure the safety and protection of your Raspberry Pi 4 Model B with an affordable, sturdy red-white plastic case designed specifically for the Pi 4B model. This Raspberry Pi case offers optimal security for your device while...
- Rs. 98
Rs. 199- Rs. 98
- Unit price
- per
Save Rs. 101
Best Price Guarantee
Ready Stock for Bulk Purchase
Dedicated Account Managers
5% GST Benefits for Eligible SEZ and Edu
Technical Support Available
1-Year Manufacturer Warranty
Chat
