Buy Atmega IC Online At The Best Price In India

Compare
ATmega8
ATmega8 The ATmega8A IC is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega8A achieves throughputs approaching 1 MIPS per MHz, allowing the system designer to optimize power consumption versus processing...

Rs 189/-

Rs 189/-

~~Rs 302/-~~
Save Rs 113/-
Compare
ATMEL 89C2051 IC
ATMEL 89C2051 IC The Atmel AT89C2051 IC is a low-voltage, high-performance CMOS 8-bit microcomputer with 2K bytes of Flash programmable and erasable read-only memory (PEROM). The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By...

Rs 81/-

Rs 81/-

~~Rs 124/-~~
Save Rs 43/-
Compare
ATmega16 (324)
ATmega16 The ATmega ATmega16 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega16 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus...

Rs 209/-

Rs 209/-

~~Rs 350/-~~
Save Rs 141/-
Compare
ATmega328P-U PDIP-28 8 BIT Microcontroller IC
ATmega328P-U PDIP-28 8 BIT Microcontroller IC The Atmel ATmega328 IC is a 32K 8-bit microcontroller based on the AVR architecture. Many instructions are executed in a single clock cycle providing a throughput of almost 20 MIPS at 20MHz. The ATMEGA328P-U comes in an PDIP...

Rs 279/-

Rs 279/-

~~Rs 449/-~~
Save Rs 170/-
Compare

Atmel 89S52
Atmel 89S52 The Atmel AT89S52 is a low-power, high-performance CMOS 8-bit microcontroller with 8K bytes of in-system programmable Flash memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 instruction set and pin out. The on-chip...

Rs 92/-

Rs 92/-

~~Rs 119/-~~
Save Rs 27/-

Notify me

Notify me
Compare

ATMEGA328P SMD IC for Arduino Nano/UNO – AVR Microcontroller
ATMEGA328P SMD IC for Arduino Nano/UNO – AVR Microcontroller The ATMEGA328P SMD IC (ATMEGA328P-AU) is a high-performance 8-bit AVR microcontroller widely used in Arduino Nano and Arduino Uno boards. Designed with picoPower technology, this SMD version includes 32KB ISP Flash, 2KB SRAM, 1KB EEPROM,...

Rs 344/-

Rs 344/-

~~Rs 799/-~~
Save Rs 455/-

Notify me

Notify me
Compare

ATmega162
ATmega162 The ATmega162 is a low-power CMOS 8-bit microcontroller based on the AVR-enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.The...

Rs 867/-

Rs 867/-

~~Rs 928/-~~
Save Rs 61/-

Notify me

Notify me
Compare

ATmega168
ATmega168 The Atmel ATmega168 is a low-power CMOS 8-bit microcontroller based on the AVR-enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega168 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing...

Rs 350/-

Rs 350/-

~~Rs 370/-~~
Save Rs 20/-

Notify me

Notify me

A Simple Way to Understand Atmega Ic

Many people struggle to pick the correct atmega ic, especially when starting out. When working with atmega ic, even small decisions matter a lot. These are the kind of atmega ic that students and makers regularly use when building working prototypes. This way, you spend less time fixing mistakes and more time creating. Find the right match and move your project ahead.

Buy Atmega IC Online At The Best Price In India

Atmega Integrated Circuits (ICs) are a type of microcontroller ICs produced by Atmel Corporation. Atmel AVR microcontrollers, including the Atmega ICs, are widely used in embedded systems for various applications due to their high performance, low power consumption, and cost-effectiveness. The Atmega ICs operate between 2.7-5.5 volts, achieving throughputs approaching one Million Instructions Per Second (MIPS) per MHz, balancing power consumption and processing speed. They have an advanced Reduced Instruction Set Computer (RISC) architecture, enabling them to execute approximately 131 instructions while consuming low power.

The Atmega ICs can be programmed using an Arduino board as an In-System Programmer (ISP) for a virgin ATMega 328P IC. They are available in different variants, and a comparison table is available for their technical specifications.

The Atmega ICs come with integrated communication devices such as Serial Peripheral Interface (SPI) and USART, making them powerful communication solutions. There are various electronics projects based on Atmega8 microcontrollers of AVR series, which are explained with the help of schematics, source codes, and videos.

FAQs:

1.How many interrupt peripherals are there in Atmega microcontrollers, and what are they used for?

Atmega microcontrollers have 21 interrupt peripherals, of which 3 are used for external sources and the remaining 19 are used for internal subsystems. These interrupts are used to interrupt the normal sequence of events in case of high-priority emergencies.

2.How many timers are there in Atmega2560, and what does the number of bits represent in these timers?

The Atmega2560 has a total of 6 timers, of which 2 are 8-bit timers and 4 are 16-bit timers. The number of bits in these timers represents the resolution of the timers, i.e., the number of bits each timer can store.

3.How can one program the SMD Atmega328 without using the USB bootloader?

One can program the SMD Atmega328 without using the USB bootloader by putting a 6 pin ISCP header on the PCB to support flash programming, buying a USBASP programmer from Ebay, and flashing the Arduino program straight to the board.

Explore Other Categories :

Popular Searches:

Atmega IC

Categories

Refined By Clear all

Availability

Price

Featured Products

A Simple Way to Understand Atmega Ic

All About Atmega IC