1. What cables do I need for Raspberry Pi?

The Raspberry Pi has multiple ports that can be used to connect different types of cables for different purposes. You would typically need USB cables, Type C cables, HDMI cables and camera cables for an R Pi board. A Raspberry Pi can be powered via micro USB cable from your laptop or a suitable power bank. The Raspberry Pi has an HDMI port which you can connect directly to a monitor or TV with an HDMI cable.

2. Can I power a Raspberry Pi from USB?

Yes, a Raspberry Pi can be powered with a USB cable. The USB cable can be connected to a 5V adapter or a laptop.

3. Can I connect Raspberry Pi to a TV using cables?

Yes, a Raspberry Pi can be connected to a TV using a HDMI cable. The Raspberry Pi has an HDMI port which can be directly connected to a monitor or TV with an HDMI cable. This is the easiest solution for modern monitors and TVs that have a HDMI cable.

4. Does Raspberry Pi have an HDMI cable?

Yes, the Raspberry Pi has a HDMI cable and HDMI port. It comes with a HDMI to HDMI cable and a HDMI to Micro HDMI adapter. This can be connected to TVs, modern monitors, and other devices.

5. How many USB ports does Raspberry Pi have?

The number of USB ports on Raspberry Pi varies by model. The original Model B has 2 USB 2.0 ports, while Models B+, 2B, 3B, and 3B+ offer 4 USB 2.0 ports. The Raspberry Pi 4 features 2 USB 2.0 and 2 USB 3.0 ports for faster data transfer. Always check the specific model for exact port details.

6. What types of cables are available in this collection?

You’ll find a broad variety of cables. Jump wires for breadboards and microcontrollers, USB cables (Type-A, Type-C, Micro-USB), HDMI cables, ribbon cables, power extension cables, and interface cables for robotics (motor cables, sensor leads). Whether you’re wiring a sensor to a microcontroller or connecting a monitor to your computer, there’s a cable style to suit.

7. Are these cables suitable for Arduino, Raspberry Pi, or robotics projects?

Yes, very much so. Jump wires and ribbon cables are perfect for Arduino and Raspberry Pi prototyping, breadboarding, and hooking up sensors. The USB cables reliably power those boards or connect them to computers. For robotics, motor leads, servo cables and extension harnesses help you run wires neatly and safely. The collection supports the hardware ecosystem commonly used by makers.

8. What lengths and colors do the cables come in?

The cables come in different lengths and a variety of colors. Short jumper cables might be 10 cm or so for tight breadboard layouts, while USB, HDMI or extension cables could be 1 m, 2 m, 5 m or more for larger setups. Colors range from black, red, blue, yellow and more, making it easier to organize wires by function, visually trace connections, or match your project’s style.

9. Are HDMI and USB cables compatible with standard devices?

Yes. HDMI cables in the collection support standard HDMI ports used in televisions, monitors, computers and SBCs like Raspberry Pi. USB cables match standard USB ports (USB-A, USB-C, Micro-USB) used on computers, microcontrollers, chargers and peripherals. They follow the widely accepted interface standards so you’ll be able to plug into your usual gear without compatibility surprises.

10. Can these cables be used for both data transfer and power?

Yes, many of them can. For example, USB cables commonly carry both power and data, so you can program a microcontroller and power it at the same time. Some cables are purely for power (like dedicated power leads) or purely data (like HDMI), while others handle both depending on the interface. It’s important to check each cable’s rating and specification to ensure it suits your project’s requirement for power, data or both.

Cables

Cable Categories

HDMI Cables – For high-definition video/audio connections between devices such as monitors, TVs, and PCs.

USB Cables – Used for data transfer and power delivery; includes USB-A, USB-C, Micro-USB, and USB 2.0/3.0 types.

Ethernet Cables – Wired network connectivity options like Cat5e, Cat6 for stable communication.

Jumper Wires – Single-wire leads ideal for prototyping on breadboards with Arduino or Raspberry Pi.

Ribbon Cables – Flat multi-wire cables for parallel pin connections, IO headers, and multi-pin modules.

Application Examples: DIY Electronics, IoT, Robotics, Automation

Use HDMI cables to connect Raspberry Pi or SBCs to displays for IoT dashboards and monitoring interfaces.

Use USB cables to power and program microcontrollers (Arduino, ESP32) and handle sensor or device communication.

Use Ethernet cables for reliable, low-latency connections in robotics and networked IoT systems.

Use jumper wires for fast prototyping of sensors, modules, motors, and control circuits.

Use ribbon cables when connecting multiple pins at once—ideal for stepper drivers, parallel IO modules, and custom PCBs.

Compatibility & Connection Tips for Microcontrollers

Use the correct jumper wire type (male–male, male–female, female–female) based on your board’s pin headers.

Ensure USB cables support both data and power—some cheap cables are charge-only.

For USB-C devices, match the cable to the required USB version if you need high-speed data transfer.

Keep jumper wire paths short and organized to minimize noise, especially for analog or sensitive sensors.

Ribbon cables usually have a marked stripe indicating pin 1; align this correctly when connecting headers.

Use Cat5e or Cat6 Ethernet cables to ensure fast, stable network communication with minimal interference.

Comparison Guide: Different Cable Types & Their Uses

Cable Type	Main Use	Strengths	Considerations
HDMI	High-definition video/audio connections	Supports audio + video, high resolution	Cable quality matters for 4K/8K sets
USB	Device data communication + power	Universal, many types	Cable must support required data/power
Ethernet	Wired network links	Reliable, fast, low latency	Needs correct category and proper terminations
Jumper Wires	Prototyping on Arduino/Raspberry Pi breadboards	Easy to connect, flexible	Not suitable for high power or long runs
Ribbon Cables	Multi-pin parallel connections	Compact, many conductors	More difficult to manage in tight spaces

Maintenance & Cable Management Tips

Label both ends of longer cables so you can identify them later.

Use Velcro straps or cable ties to bundle cables – keep them off the floor and away from heat or moving parts.

For USB/HDMI: avoid bending the connector excessively, uninstall old/broken cables – a bad cable can cause data errors.

Check ribbon cables for worn connectors and ensure red stripe corresponds to pin #1 for correct orientation.

For jumper wires: keep them sorted by length and gender (male/female) for quick prototyping.

Avoid running power and data cables too close together to reduce interference – especially in automation and robotics setups.

For Ethernet cables: avoid excessively long runs unless specified; keep twists intact to maintain signal integrity.

Inspect cable ends, connectors and insulation periodically – replace if you find exposed wires or damaged shielding.

Raspberry Pi Cables	Cost
HDMI to Micro HDMI Converter	Rs.59
HDMI to Micro HDMI Cable	Rs.244
Raspberry Pi Official Micro-HDMI to Standard HDMI Cable	Rs.384
Type C USB Cable	Rs.117
Raspberry Pi Camera FFC FPC Flexible Display Cable	Rs.117
Camera Cable for Raspberry Pi 3 and R-Pi 2	Rs.60
Raspberry Pi T-Cobbler	Rs.236
HDMI to VGA Converter	Rs.294
HDMI to HDMI Cable	Rs.148
Ethernet LAN Cable	Rs.59

All Categories

Cables

Categories

Refined By Clear all

Availability

Price

Featured Products

All About Cables

Buy Raspberry Pi Cables Online in India

Cable Categories

Application Examples: DIY Electronics, IoT, Robotics, Automation

Compatibility & Connection Tips for Microcontrollers

Comparison Guide: Different Cable Types & Their Uses

Maintenance & Cable Management Tips

Raspberry Pi & Arduino Cables Prices in India

Frequently Asked Questions

1. What cables do I need for Raspberry Pi?

2. Can I power a Raspberry Pi from USB?

Yes, a Raspberry Pi can be powered with a USB cable. The USB cable can be connected to a 5V adapter or a laptop.

3. Can I connect Raspberry Pi to a TV using cables?

Yes, a Raspberry Pi can be connected to a TV using a HDMI cable. The Raspberry Pi has an HDMI port which can be directly connected to a monitor or TV with an HDMI cable. This is the easiest solution for modern monitors and TVs that have a HDMI cable.

4. Does Raspberry Pi have an HDMI cable?

Yes, the Raspberry Pi has a HDMI cable and HDMI port. It comes with a HDMI to HDMI cable and a HDMI to Micro HDMI adapter. This can be connected to TVs, modern monitors, and other devices.

5. How many USB ports does Raspberry Pi have?

The number of USB ports on Raspberry Pi varies by model. The original Model B has 2 USB 2.0 ports, while Models B+, 2B, 3B, and 3B+ offer 4 USB 2.0 ports. The Raspberry Pi 4 features 2 USB 2.0 and 2 USB 3.0 ports for faster data transfer. Always check the specific model for exact port details.

6. What types of cables are available in this collection?

7. Are these cables suitable for Arduino, Raspberry Pi, or robotics projects?

8. What lengths and colors do the cables come in?

9. Are HDMI and USB cables compatible with standard devices?

10. Can these cables be used for both data transfer and power?

Let customers speak for us

All Categories

Cables

Categories

Refined By Clear all

Availability

Price

Featured Products

Sort by:

All About Cables

Buy Raspberry Pi Cables Online in India

Cable Categories

Application Examples: DIY Electronics, IoT, Robotics, Automation

Compatibility & Connection Tips for Microcontrollers

Comparison Guide: Different Cable Types & Their Uses

Maintenance & Cable Management Tips

Raspberry Pi & Arduino Cables Prices in India

Frequently Asked Questions

1. What cables do I need for Raspberry Pi?

2. Can I power a Raspberry Pi from USB?

Yes, a Raspberry Pi can be powered with a USB cable. The USB cable can be connected to a 5V adapter or a laptop.

3. Can I connect Raspberry Pi to a TV using cables?

Yes, a Raspberry Pi can be connected to a TV using a HDMI cable. The Raspberry Pi has an HDMI port which can be directly connected to a monitor or TV with an HDMI cable. This is the easiest solution for modern monitors and TVs that have a HDMI cable.

4. Does Raspberry Pi have an HDMI cable?

Yes, the Raspberry Pi has a HDMI cable and HDMI port. It comes with a HDMI to HDMI cable and a HDMI to Micro HDMI adapter. This can be connected to TVs, modern monitors, and other devices.

5. How many USB ports does Raspberry Pi have?

The number of USB ports on Raspberry Pi varies by model. The original Model B has 2 USB 2.0 ports, while Models B+, 2B, 3B, and 3B+ offer 4 USB 2.0 ports. The Raspberry Pi 4 features 2 USB 2.0 and 2 USB 3.0 ports for faster data transfer. Always check the specific model for exact port details.

6. What types of cables are available in this collection?

7. Are these cables suitable for Arduino, Raspberry Pi, or robotics projects?

8. What lengths and colors do the cables come in?

9. Are HDMI and USB cables compatible with standard devices?

10. Can these cables be used for both data transfer and power?

Sign up for our newsletter

Shop the look

Choose Options

Edit Option

Back In Stock Notification

Compare

Choose Options

Let customers speak for us