-
STM32F103C6T6A Board STMicroelectronics ARM MicrocontrollersSTM32F103C6T6A Board STMicroelectronics ARM Microcontrollers The STM32F103C6T6A Board is a microcontroller development board based on the Arduino Nano size. The microcontroller has a 32-bit ARM Cortex-M3 core. It is a powerful and economical solution for those who want to improve themselves in the field of embedded...
- Rs 185/-
- Rs 185/-
-
Rs 249/-
Save Rs 64/- -
Arduino UNO+WiFi R3 ATmega328P+Node MCU ESP8266 CH340G Compatible BoardCH340G Board compatible with Arduino The Uno+WiFi R3 is a fully integrated board that combines the Uno R3 ATmega328 microcontroller with the WiFi ESP8266 chip, along with 8Mb of memory, all on a single board. Inspired by the widely used arduino uno, this board...
- Rs 432/-
- Rs 432/-
-
Rs 749/-
Save Rs 317/- -
Arduino Leonardo R3 compatible boardArduino Leonardo R3 Board Compatible with Arduino The Arduino Leonardo R3 board Micro-USB Arduino Compatible is a powerful microcontroller board based on the ATmega32u4. This Arduino Leonardo board comes with 20 digital input/output pins (including seven PWM outputs and twelve analogue inputs), a 16...
- Rs 485/-
- Rs 485/-
-
Rs 649/-
Save Rs 164/- -
5V 1A ERD Adapter with Micro USB cable5V 1A ERD Adapter with Micro USB cable Power your low-current electronics projects with the 5V 1A ERD Adapter with Micro USB Cable, designed to provide a stable 5V DC supply for compatible Micro USB-powered devices. With a maximum output of 1A, it is...
- Rs 189/-
- Rs 189/-
-
Rs 259/-
Save Rs 70/- -
3.2in Raspberry Pi Touch Screen3.2inch Raspberry Pi Touch Screen The 3.2inch standard display, support HDMI input, refresh rate of 60FPS or more. It has a physical resolution 320*240. It can be used as display for raspberry pi, with touch control function (need to install touch drive). It also can be used as a computer...
- Rs 892/-
- Rs 892/-
-
Rs 1,874/-
Save Rs 982/- -
Waveshare 7 Inch HDMI Resistive Touch Display 1024×600 IPSWaveshare 7 Inch HDMI Resistive Touch Display 1024×600 IPS The Waveshare 7 Inch HDMI Resistive Touch Display is a versatile 1024 × 600 IPS touchscreen designed for Raspberry Pi Boards, BeagleBone Black, desktop PCs, and other HDMI-enabled devices. With its HDMI display interface, USB...
- Rs 4,425/-
- Rs 4,425/-
-
Rs 6,999/-
Save Rs 2,574/- -
BBC Micro:Bit Silicone Soft Cover Protective Case (Blue) for BBC Micro:Bit V1 & V2BBC Micro:Bit Silicone Soft Cover Protective Case This fancy and cute case has been specially designed to protect your Micro:Bit from damage and external wear and tear. It gives you full access to bottom pins, A B buttons, USB ports and any other connectors....
- Rs 154/-
- Rs 154/-
-
Rs 299/-
Save Rs 145/- -
ESP32 CP2102 Wireless Development Board D1 LOLIN32ESP32 CP2102 Wireless Development Board D1 LOLIN32 The D1 LOLIN32 ESP32 CP2102 Wireless Development Board is a small yet powerful device that improves the adaptability and effectiveness of your Internet of Things projects. Based on the reliable ESP-32 chip, this board has 4MB of...
- Rs 427/-
- Rs 427/-
-
Rs 599/-
Save Rs 172/- -
USB ISP Programmer Version 2.0 For ATMEL (662)USB ISP Programmer Version 2.0 This programmer is based on Thomas Fischl's usb asp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegant. The USB interface is achieved by using an atmega processor...
- Rs 170/-
- Rs 170/-
-
Rs 299/-
Save Rs 129/- -
Arduino Data Logger ShieldData Logger Shield for Arduino This data logger is best suited for UNO boards, Leonardo Boards or Mega boards compatible with Arduino. It helps these development boards to log sensor data to an SD card with the minimum of set-up. The shield contains appropriate level shifting...
- Rs 138/-
- Rs 138/-
-
Rs 221/-
Save Rs 83/- -
PCF8591 ADC-DAC Converter ModulePCF8591-ADC-DAC Analog Digital Converter Module The PCF8591 is a 8-bit CMOS data acquisition device. The PCF8591 has the four analog inputs, one analog output and a serial I2C bus interface. PCF8591 has three address pins A0, A1 and A2 that can be used to...
- Rs 128/-
- Rs 128/-
-
Rs 198/-
Save Rs 70/- -
STM32F030F4P6 Development Board (143)STM32F030F4P6 Development Board The STM32F030F4P6 core board development board core ARM CORTEX-M0 incorporates the high-performance ARM Cortex™-M0 32- bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 64 Kbytes of Flash memory and up to 8 Kbytes of SRAM),...
- Rs 189/-
- Rs 189/-
-
Rs 244/-
Save Rs 55/- -
Dedicated 4020 Cooling Fan for Jetson NanoDedicated 4020 Cooling Fan for Jetson Nano This 4020 cooling fan is designed and optimized for best performance with the NVIDIA jetson nano. The dimensions and the functionality of this cooling fan is makes it work well with jetson nano. It helps solve the...
- Rs 175/-
- Rs 175/-
-
Rs 199/-
Save Rs 24/- -
ERD 5V 2.4A adapter with MicroUSB cableERD 5V 2.4A adapter with MicroUSB cable This is an ERD fast charger adapter with 5V 2.4A capacity. ERD chargers comes with smart chip to protect your device from Short Circuit & Overload. They are compatiblw with Raspberry Pi boards for charging and connectivity....
- Rs 222/-
- Rs 222/-
-
Rs 299/-
Save Rs 77/- -
Raspberry Pi 3 B/B+ Case black (Chinese) (133)Raspberry Pi 3 Case This is the RaspberryPi Official Case for Raspberry Pi 3. The case's unique design and customization makes it the most suitable addition to your Pi case genre. It is made from the same tough plastic and again features the Raspberry...
- Rs 120/-
- Rs 120/-
-
Rs 227/-
Save Rs 107/- -
Arduino Data Logger Shield for Boards CompatibleData Logger Shield The Data Logging Shield of "Deek-Robot" is supplied with an RTC (DS1307) and thus has an extra compartment for a button cell. The SD Card Slot is designed for Micro SD Card. Onboard 3.3V regulator is both a reliable reference voltage and...
- Rs 279/-
- Rs 279/-
-
Rs 349/-
Save Rs 70/- -
Lamp for Raspberry Pi 3 Camera (122)Raspberry Pi 3 Camera Lamp This lamp for Raspberry Pi 3 Camera provides an additional focus that can be added to your night vision surveillance camera project using Raspberry Pi. The Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera features the Onboard...
- Rs 183/-
- Rs 183/-
-
Rs 199/-
Save Rs 16/- -
Arduino Mega 2560 R3 Sensor Shield V2.0 compatibleMega 2560 R3 Sensor Shield V2.0 compatible with Arduino The Arduino mega has many more i/o pins (54 digital pins and 16 analog pins)than a standard Arduino. This Arduino shield also has connectors specifically for some external devices like an SD card, radio communications (Bluetooth and others)....
- Rs 147/-
- Rs 147/-
-
Rs 229/-
Save Rs 82/- -
Male to Male DB-9 CableMale to Male DB-9 Cable This fully moulded DB9 serial cables offer solid performance at economical prices. All cables combine a foil shield construction and PVC jacket for flexibility and reliability. It has a fully moulded hoods with thumbscrews. The length of the cable...
- Rs 109/-
- Rs 109/-
-
Rs 199/-
Save Rs 90/- -
ARM-JTAG-20-10 Plug-in Adapter for JTAG 20-Pin to 10-Pin with 20 cm Cable - 7SemiARM-JTAG-20-10 Plug-in Adapter for JTAG 20-Pin to 10-Pin with 20 cm Cable - 7Semi The 7Semi ARM-JTAG-20-10 Plug-in Adapter simplifies ARM microcontroller programming and debugging by converting the standard 20-pin JTAG (0.1") interface to a compact 10-pin (0.05") layout. Ideal for development boards with...
- Rs 442/-
- Rs 442/-
-
Rs 583/-
Save Rs 141/-
Best Price Guarantee
Ready Stock for Bulk Purchase
Dedicated Account Managers
5% GST Benefits for Eligible SEZ and Edu
Technical Support Available
1-Year Manufacturer Warranty
Chat
