Found a better price?

Let us know!
We'll try to match the price for you

2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis

2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis-Robocraze
2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis-Robocraze
2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis-Robocraze
  • 2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis-Robocraze
  • 2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis-Robocraze
  • 2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis-Robocraze

2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis

Regular price
Rs. 259
Sale price
Rs. 259
Regular price
Rs. 499
You save Rs. 240
48% off
You save Rs. 240
Unit price
per 
  • ⚡ Dispatched within 24 hours
  • 🚚 Free shipping on orders above Rs 500/-
  • 💰 Earn RC Coins on every purchase
  • 🛠️ Dedicated Technical Support Team
  • This is 2WD Two Wheel Drive Kit - A Smart Robot Car with Chassis
  • This robot car is very handy and simple to assemble.
  • This has strong components so as to withstand extreme terrain conditions.
  • This robot car comes with transparent Car Chassis.
  • This smart robot car has an attractive design.

2WD Two Wheel Drive DIY Kit - A Smart Robot Car with Chassis

This is 2WD Two Wheel Drive Kit - A Smart Robot Car with Chassis and this comes with two pairs of Geared Motors and Wheels. All the products included in this car kit are quality products. The chassis used in this kit is transparent to create dynamic handling of the components mounted on your robot car.

You can build Bluetooth controlled toy robot car or arduino car with this smart robot car kit, for that you need HC-06 Bluetooth module , Arduino Uno , jumper wires , batteries , switch and motor driver board.

Features:

  • Very handy and simple in assembling/disassembling.
  • Strong components to withstand extreme terrain conditions.
  • Transparent Car Chassis.
  • Attractive design.
  • Double-layer structure, many mounting holes, enough space
  • Easy to install a variety of control panels, sensors
  • Educational toys, Ideal for the DIY platform

Package Includes:

  • 1 x Car chassis
  • 2 x Wheels
  • 1 x Castor wheel
  • 2 x BO Motors
  • 2 x Speed encoders
  • 1 x Battery holder
  • All necessary screw and nuts.

Specifications:

Operating Voltage (VDC)

3 ~ 6

Shaft Length (mm)

8.5

Shaft Diameter (mm)

5.4mm-(round side) and 3.5mm-(flat side)

Rated Speed After Reduction (RPM)

200

Rated Torque (Kg-Cm)

0.8

Gearbox Shape

Straight

1. How can I make a robot car at home?

  1. Gather materials : The following supplies are required to build your robot automobile. If you're unsure of the exact dimensions of each component, read through the instructions to get a sense of how they fit together.
  • two engines
  • dual wheels
  • Arduino board, a microcontroller (the Arduino Uno is a good choice for beginners)
  • motor driver circuit or the motor driver shield (found in remote-controlled toy cars)
  • 6 volt batteries and a battery holder (e.g. four AA batteries)
  • chassis: a sheet of plexiglass or acrylic, measuring around 6.5 by 4.5 inches (16.5 by 11.5 cm).

2. Attach the wheels and motors to the chassis: Each wheel should be attached to a different motor. As shown, hot glue the engine to the chassis: Mark two spots, one on either side of the chassis' one end.

Each location on the upper side of the chassis should have one motor glued over it. To allow the wheel to roll along the ground, make sure it hangs over the edge.

3. Glue on the battery holder: On the upper side of the chassis, in between the wheels, add a little amount of hot glue. Let the battery holder set after pressing it. 

4. Attach the motor driver circuit: Place the motor driver circuit close to one of the chassis' sides such that the wires droop over the edge. 

5. Position the Arduino: Put some glue on the chassis and tuck the Arduino next to the driving circuit. Make sure the connector for plugging the Arduino into the PC is accessible while situating it.