ESP32 CAM USB Programmer Rev2.0 โ€“ Auto-boot USB programmer for ESP32 CAM. -Development Board -Robocraze
ESP32 CAM USB Programmer Rev2.0 โ€“ Auto-boot USB programmer for ESP32 CAM. -Development Board -Robocraze
ESP32 CAM USB Programmer Rev2.0 โ€“ Auto-boot USB programmer for ESP32 CAM. -Development Board -Robocraze
ESP32 CAM USB Programmer Rev2.0 โ€“ Auto-boot USB programmer for ESP32 CAM. -Development Board -Robocraze
ESP32 CAM USB Programmer Rev2.0 โ€“ Auto-boot USB programmer for ESP32 CAM. -Development Board -Robocraze
s

Robocraze BEST PRICE GUARANTEED

ESP32 CAM USB Programmer Rev2.0 With Auto Boot

Rs. 284
Rs. 419
Rs. 284
Save Rs. 135
(-32%)
Incl. GST (No Hidden Charges) Found a better price?
Please hurry! Only 0 left in stock
SKU: TIFC00207
  • USB programming for ESP32-CAM.
  • Reliable CH340 serial chip.
  • Plug-and-play, no manual reset needed.
  • USB Type-C connector.
  • Power ON and RX LEDs.
  • Operates from -20ยฐC to 85ยฐC.
  • Female connector for ESP32-CAM.
  • Original, high-quality board.
FLAT โ‚น 100/- OFF
RC100
COPY CODE

When you shop for โ‚น2500 or more. Applicable at checkout.
*Coupons are not applicable on Original Boards and Kits.

Robocraze Academy Limited Time Offer

Free shipping on Orders Above Rs 499/-

Technical Support & Easy Returns

Same Day Shipping

Earn RC Coins on Every Purchase

Cash on Delivery Available

ESP32 CAM USB Programmer Rev2.0 โ€“ Auto-boot USB programmer for ESP32 CAM. -Development Board -Robocraze
ESP32 CAM USB Programmer Rev2.0 With Auto Boot
Rs. 419 Rs. 284

ESP32 CAM USB Programmer Rev2.0 With Auto Boot

Rs. 419 Rs. 284

ESP32 CAM USB Programmer Rev2.0 With Auto Boot

If you've been frustrated by the tricky process of programming your ESP32-CAM, let me introduce you to the ESP32 Cam Programmer Rev2.0. This handy little tool adds the missing USB programming feature that the ESP32 CAM didn't come with. No more fiddling with manual resets or boot mode selectionsโ€”just plug in the Cam-Prog, connect it to your computer via the C-Type USB, and you're good to go. It works like a shield that snaps right onto your ESP32 CAM, and with the reliable CH340 serial USB chip onboard, you'll be up and running with the Arduino IDE in no time. This is the upgrade your ESP32 CAM has been waiting for!

Package Includes:

  • 1 x ESP32 CAM USB Programmer Rev2.0
  • 2 x 8 Pin Male Header

Specifications:

Specification Details
Serial Chip CH340
Buttons Boot, EN/RST
Interface USB Programmer
USB Connector C Type
Connector Type Female Connector for ESP32-CAM Board
LED Indicators On-Board Power ON LED, On-Board RX LED
Input Voltage 5V
Operating Temperature -20ยฐC to 85ยฐC

Shipping Policy

  • All orders confirmed before 3:00 PM IST are shipped the same day, barring rare pickup delays on holidays or disturbances.
  • Delivery time in Metro cities is 1โ€“3 days; for other locations, it is 3โ€“7 days. Delivery varies based on location and courier service.

Return & Refund Policy

  • Return window: 7 days from receipt unless stated otherwise.
  • No refunds or replacements after the return window.
  • Returns are accepted only for non-working or damaged products.
  • Initiate return requests via a Support ticket or contact us at +91-8123057137.
  • Refunds are processed within 3โ€“4 working days after inspection and approval.

You May Also Like

Recently Viewed Products