-
SmartElex 10A 5V 1-Channel Relay ModuleSmartElex 10A 5V 1-Channel Relay Module The SmartElex 10A 5V 1-Channel Relay Module is a compact and dependable low level trigger relay module designed to control high-power devices using low-voltage microcontrollers. Operating at 5V DC, this single channel relay module features an SPDT relay...
- Rs 159/-
- Rs 159/-
-
Rs 179/-
Save Rs 20/- -
ADIY 1 Channel 5V Relay Module with Optocoupler for ArduinoADIY 1 Channel 5V Relay Module with Optocoupler for Arduino The 1 channel 5V relay module with optocoupler is designed for safely switching a single high-power device using a microcontroller such as Arduino. This module supports both AC and DC loads, allowing you to...
- Rs 52/-
- Rs 52/-
-
Rs 69/-
Save Rs 17/- -
SmartElex D4184 MOSFET Control Module for Motor ControlSmartElex D4184 MOSFET Control Module for Motor Control The SmartElex D4184 MOSFET Control Module is a versatile solution for controlling motors, solenoid valves, and other high-current devices. Powered by a 40V 50A MOS tube, this d4184 mosfet module delivers reliable performance for demanding applications....
- Rs 99/-
- Rs 99/-
-
Rs 149/-
Save Rs 50/- -
ICM-20948 9DoF IMU Breakout Board (MPU-9250 Upgrade) - 7SemiICM-20948 9DoF IMU Breakout Board (MPU-9250 Upgrade) - 7Semi The 7Semi ICM-20948 9DoF IMU Breakout is a compact and versatile motion tracking module designed for applications in smartphones, wearables, and IoT devices. It integrates a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer, providing comprehensive...
- Rs 1,130/-
- Rs 1,130/-
-
Rs 1,416/-
Save Rs 286/- -
SmartElex USB-C Serial Basic Converter and CH340C IC Breakout ModuleSmartElex USB-C Serial Basic Converter and CH340C IC Breakout Module he SmartElex USB-C Serial Basic Converter with CH340C is a compact USB-to-serial adapter designed to help users program, debug, and communicate with microcontroller boards and embedded systems. It converts USB signals to reliable UART...
- Rs 149/-
- Rs 149/-
-
Rs 194/-
Save Rs 45/- -
2 Channel Logic Level Converter (I2C, UART, 5V-3.3V)2 Channel Logic Level Converter (I2C, UART, 5V-3.3V) The 2 Channel Logic Level Converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices. Each level...
- Rs 23/-
- Rs 23/-
-
Rs 34/-
Save Rs 11/- -
ISD1820 Sound Voice Board Recording ModuleISD1820 Sound Voice Board Recording Module The ISD1820 Sound/Voice Board Recording is 100% Brand new and high-quality Board ISD1820 chip with an Onboard microphone, you can direct recording of About 10 seconds voice recording. This voice record/playback device is based on the ISD1820 chip, which...
- Rs 161/-
- Rs 161/-
-
Rs 180/-
Save Rs 19/- -
5V 1 Channel made in INDIA - GL Make5V 1 Channel made in INDIA - GL Make This 1-channel relay board operates on 5V. Can be used directly to control 240V power appliances from most of the microcontrollers and other control system circuits. Perfect for switching 240V appliances like lights, fans, etc....
- Rs 35/-
- Rs 35/-
-
Rs 49/-
Save Rs 14/- -
1-CH 12V Relay Board1-CH 12V Relay Board This is a small and easy to use 1 channel relay board that operates on 12V. Use it to control one 240V power appliance directly from Arduino, Raspberry Pi, and other microcontrollers or low voltage circuits. Perfect for switching 240V...
- Rs 53/-
- Rs 53/-
-
Rs 79/-
Save Rs 26/- -
Smart Solar Charge Controller 10A with TimerSmart Solar Charge Controller 10A with Timer The Smart Solar Charge Controller 10A with Timer is an intelligent solar power management solution designed to efficiently regulate charging and protect your battery system. Supporting both 12V and 24V setups, it delivers up to 10A charging...
- Rs 329/-
- Rs 329/-
-
Rs 399/-
Save Rs 70/- -
SmartElex USB-C Connector Breakout ModuleSmartElex USB-C Connector Breakout Module The SmartElex USB-C Connector Breakout Module is the ideal solution for makers and engineers looking to add a USB-C connector to their projects with ease. Designed similar to the SparkFun USB C Breakout, this handy USB C breakout board...
- Rs 34/-
- Rs 34/-
-
Rs 79/-
Save Rs 45/- -
SmartElex 9DoF IMU Breakout Board with 3-Axis ISM330DHCX AccelerometerSmartElex 9DoF IMU Breakout Board with 3-Axis ISM330DHCX Accelerometer The SmartElex 9DoF IMU Breakout is a compact, high-performance sensor board designed for precise motion and orientation detection. It combines the ISM330DHCX 3D accelerometer and gyroscope with the MMC5983MA magnetometer, giving you accurate readings across...
- Rs 611/-
- Rs 611/-
-
Rs 769/-
Save Rs 158/- -
CH375B U Disk Read Write Module (122)CH375B U Disk Read Write Module The CH375B U Disk Read Write Module is fully compatible with CH372, CH375. The CH375 firmware has a built in dedicated protocol processing Mass-Storage and can be directly used as the basic unit of reading and writing in sectors USB storage devices....
- Rs 289/-
- Rs 289/-
-
Rs 440/-
Save Rs 151/- -
JQX-15F(T90) Coil Voltage DC 24V 6 Pin Power RelayJQX-15F(T90) Coil Voltage DC 24V 6 Pin Power Relay This is a JQX-15F (T90) 24VDC 6Pin 30A Power Relay. The relay is switched with the help of a small signal from a microcontroller like an Arduino. This relay can be used to drive 30A...
- Rs 93/-
- Rs 93/-
-
Rs 102/-
Save Rs 9/- -
DTMF Decoder - GLDTMF Decoder - GL Decodes DTMF audio signal to 4 bit binary TTL level output with LED indication. It also indicates outputs with LED. Can be used directly with microcontrollers to develop various DTMF related applications like remote monitoring, remote control, Caller ID, Auto...
- Rs 201/-
- Rs 201/-
-
Rs 221/-
Save Rs 20/- -
8-CH 12V ULN2003 Based Relay Board8-CH 12V ULN2003 Based Relay Board The 8-CH 12V Relay can control any device just like a switch contact. Its contact is isolated from the driven circuit. Features: LED Indication of Relay ON. Power Indication LED. ULN2803 Relay Driving IC. ON/OFF Power Switch. Direct...
- Rs 409/-
- Rs 409/-
-
Rs 518/-
Save Rs 109/- -
SmartElex RP2350A Microcontroller NEO Development BoardSmartElex RP2350A Microcontroller NEO Development Board The SmartElex RP2350A Microcontroller NEO Development Board is a compact and efficient platform built around the RP2350A Raspberry Pi microcontroller. Its smart split architecture design separates the USB and button circuits, ensuring a slimmer profile and improved compatibility...
- Rs 399/-
- Rs 399/-
-
Rs 749/-
Save Rs 350/- -
SmartElex BME680 Sensor Breakout Board Measures Temperature, Humidity, Pressure & GasSmartElex BME680 Sensor Breakout Board Measures Temperature, Humidity, Pressure & Gas The SmartElex BME680 Sensor Breakout Board is an advanced environmental sensing module that combines multiple sensors into one compact and efficient design. Based on the Bosch BME680, this breakout board measures temperature, humidity,...
- Rs 999/-
- Rs 999/-
-
Rs 1,499/-
Save Rs 500/- -
Four CHANNEL 12V ULN2003 BASED RELAY BOARD MODULE4 Channel 12V ULN2003 based Relay Board Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which can switch up to 7Amps. Relays terminals (C, NC,...
- Rs 178/-
- Rs 178/-
-
Rs 259/-
Save Rs 81/- -
7Semi 128Mbit SPI Flash Memory Breakout Board - W25Q128JWSIQ7Semi 128Mbit SPI Flash Memory Breakout Board - W25Q128JWSIQ The 7Semi 128Mbit SPI Flash Memory Breakout Board – W25Q128JWSIQ is a compact and developer-friendly memory solution designed to simplify data storage in embedded and IoT projects. Built around the reliable Winbond W25Q128JWSIQ IC, this...
- Rs 529/-
- Rs 529/-
-
Rs 749/-
Save Rs 220/-
Best Price Guarantee
Ready Stock for Bulk Purchase
Dedicated Account Managers
5% GST Benefits for Eligible SEZ and Edu
Technical Support Available
1-Year Manufacturer Warranty





















