-
Raspberry Pi 3 Official Case for Model B and B+(White & Pink)Raspberry Pi 3 Official Case for Model B and B+(White & Pink) This is the RaspberryPi Official Case for Raspberry Pi 3. The case's unique design and customization make it the most suitable addition to your Pi case genre. It is made from the...
- Rs 102/-
- Rs 102/-
-
Rs 169/-
Save Rs 67/- -
4G SMA Antenna with 2G/3G/4G Support4G SMA Antenna with 2G/3G/4G Support The 4G SMA Antenna supports 2G, 3G, and 4G networks, making it ideal for a wide range of wireless applications. With a gain of 1–3 dBi, 50? impedance, and ?3.0 VSWR, it ensures stable signal performance. Its SMA...
- Rs 102/-
- Rs 102/-
-
Rs 149/-
Save Rs 47/- -
Volcano hot end Heater Block/Heating Block for 3D Printer (342)Volcano hot end Heater Block/Heating Block for 3D Printer This is the specialised heater block for Volcano upgrade pack. Compatible with all Volcano Nozzles and all HotEnds except Cyclops. This block uses the same clamped thermistor mounting configuration as the E3D-v6 Heater Block for...
- Rs 63/-
- Rs 63/-
-
Rs 190/-
Save Rs 127/- -
PTFE 3x4mm White Teflon Tube for 3mm 3D Printer Filament - 1 Meter (3mm ID X 4mm OD)PTFE 3x4mm White Teflon Tube for 3mm 3D Printer Filament - 1 Meter (3mm ID X 4mm OD) The 3x4mm Teflon Tubing – For 3D Printers 3mm Filament good corrosion resistance and high insulation resistance. High or low-temperature resistance. It has unique lubricity and...
- Rs 81/-
- Rs 81/-
-
Rs 129/-
Save Rs 48/- -
PC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fittingPC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fitting The PC6-01 Pneumatic Push in Bowden Extruder for 3 mm J-Head fitting is a small part that connects the PTFE tubing to 1.75 mm Filament extruder assemblies on 3D Printers. It is compatible with the standard up to...
- Rs 35/-
- Rs 35/-
-
Rs 43/-
Save Rs 8/- -
Mk2B Heat Bed (Red) (224)MK2B Heatbed The MK2B 3D printer heat bed is a dual powered PCB heatbed that is designed for compatibility with 3D printers. The Mk2B heat bed is manufactured with high quality glass fibre that provides a truly flat surface and rigidity. The solder pads of the...
- Rs 550/-
- Rs 550/-
-
Rs 699/-
Save Rs 149/- -
Single Cell Lithium Battery Boost Power Module BoardSingle Cell Lithium Battery Boost Power Module Board The single cell power board Support FCP voltage and current output protocol. Support Qualcomm QC2.0/3.0 classA 5V, 9V, 12V voltage output. It automatically recognize FCP and QC2.0/3.0 fast charge protocol. The single cell lithium battery power module is...
- Rs 181/-
- Rs 181/-
-
Rs 313/-
Save Rs 132/- -
4 Pin Push in Conductor4 Pin Push in Conductor The 4 Pin lever nuts connector is designed with a rated voltage of 400V and an impulse voltage of 4KV. The 4 pin lever nuts compact connector is manufactured with a modified nylon (PA66) and phosphor copper is used...
- Rs 37/-
- Rs 37/-
-
Rs 42/-
Save Rs 5/- -
128x64 Graphic LCD -Yellow BacklightJHD 128x64 Graphic LCD -Yellow Backlight This is the original jHD128x64 LCD display with Yellow backlight, It is simple to use and works with the vast majority of microcontrollers on the market. With this Graphic LCD, you can do a lot of graphic things. You...
- Rs 459/-
- Rs 459/-
-
Rs 750/-
Save Rs 291/- -
ESP32 CP2102 Wireless Development Board D1 LOLIN32ESP32 CP2102 Wireless Development Board D1 LOLIN32 The D1 LOLIN32 ESP32 CP2102 Wireless Development Board is a small yet powerful device that improves the adaptability and effectiveness of your Internet of Things projects. Based on the reliable ESP-32 chip, this board has 4MB of...
- Rs 449/-
- Rs 449/-
-
Rs 599/-
Save Rs 150/- -
MAX3232 Mini RS232 to TTL ModuleMAX3232 Mini RS232 to TTL Module The Serial Port RS232 to TTL 5V Signal Converter Module is a professional module for projects requiring PC/Laptop RS232 interface to 5V TTL logic. This module converts signals between RS232 voltage levels and TTL voltage levels. It is bi-directional,...
- Rs 31/-
- Rs 31/-
-
Rs 49/-
Save Rs 18/- -
PICkit3 USB Debugger Programmer Emulator Controller Development BoardPICkit3 USB Debugger Programmer Emulator Controller Development Board The MPLAB PICkit3 Debugger Programmer makes it easier to debug and program PIC and dsPIC Flash microcontrollers. Compared to earlier generations like the ICD2, it offers more stability and connects to your PC with ease via...
- Rs 1,655/-
- Rs 1,655/-
-
Rs 2,499/-
Save Rs 844/- -
100K Trimpot Trimmer Potentiometer - (Pack of 5)100K Trimpot Trimmer Potentiometer - (Pack of 5) A Trimpot or trimmer potentiometer is a small potentiometer that is used for adjustment, tuning, and calibration in circuits. This potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver. What are...
- Rs 49/-
- Rs 49/-
-
Rs 64/-
Save Rs 15/- -
9450 Carbon Fiber Propeller for F450/F550 Drone - 1 Pair9450 Carbon Fiber Propeller for F450/F550 Drone - 1 Pair Upgrade your drone’s performance with this high-quality 9450 Carbon Fiber Nylon Propeller Set, designed for F450/F550 drones and compatible DJI multicopters. Each pair includes one clockwise (CW) and one counterclockwise (CCW) propeller with a...
- Rs 191/-
- Rs 191/-
-
Rs 249/-
Save Rs 58/- -
18650 3.7V 3800mAH Rechargeable Lithium Ion Battery with Header (Pack of 2)18650 3.7V 3800mAH Rechargeable Lithium Ion Battery with Header (Pack of 2) The 18650 3.7V 3800mAh Rechargeable Lithium Ion Battery with Header (Pack of 2) is a reliable power source for devices that need 3.7V and high capacity. These batteries are commonly used in...
- Rs 282/-
- Rs 282/-
-
Rs 349/-
Save Rs 67/- -
1800W 40A DC to DC Adjustable Power Supply Step Up Module1800W 40A DC to DC Adjustable Power Supply Step Up Module The 1800W 40A DC to DC Adjustable Power Supply Step-Up Module is a high-performance step up converter 1800W designed for efficient voltage and current regulation. This advanced 1800W 40A DC-DC boost converter converts...
- Rs 1,309/-
- Rs 1,309/-
-
Rs 1,999/-
Save Rs 690/- -
DC 12V 4CM 5010 Double Ball Cooling Fan Durable Turbo Blower for 3D PrinterDC 12V 4CM 5010 Double Ball Cooling Fan Durable Turbo Blower for 3D Printer The Original DC 12V 4CM 5010 Double Ball Cooling Fan is a great choice for a strong and easy-to-use fan for your 3D printer. It runs at 5000 to 6000...
- Rs 134/-
- Rs 134/-
-
Rs 199/-
Save Rs 65/- -
3 Channel IR Infrared CTRT5000 Line Detection Module3 Channel IR Infrared CTRT5000 Line Detection Module The 3 Channel IR Infrared CTRT5000 Line Detection Module uses Infrared to detect the line so it has anti-interference ability, visible light will not interfere with its operation. The TCRT5000 is a reflective sensor that includes an...
- Rs 169/-
- Rs 169/-
-
Rs 210/-
Save Rs 41/- -
KY-036 Metal Touch SensorKY-036 Metal Touch Sensor The KY-036 Touch Sensor Module utilizes a floating lead on a Darlington transistor to detect a touch. There are 2 LEDs on-board. A red LED lights when power is applied. A green or red LED lights when a touch is...
- Rs 44/-
- Rs 44/-
-
Rs 69/-
Save Rs 25/- -
Witty Fox 600mAh Rechargeable 3.7v LiPo BatteryWitty Fox 600mAh Rechargeable 3.7v LiPo Battery The Witty Fox 600mAh Rechargeable 3.7V LiPo Battery is a compact and high-performance power source designed for a wide range of DIY electronics, robotics, and wearable projects. With a nominal voltage of 3.7V and capacity of 600mAh,...
- Rs 160/-
- Rs 160/-
-
Rs 336/-
Save Rs 176/-
Best Price Guarantee
Ready Stock for Bulk Purchase
Dedicated Account Managers
5% GST Benefits for Eligible SEZ and Edu
Technical Support Available
1-Year Manufacturer Warranty
Chat
