A buzzer is a little electronic component that produces sound when it detects an electrical signal. It's a useful device for alerts or cautions to appear on your workplace or home appliances and gadgets. It can emit sound in two different ways piezoelectric and electromagnetic. They are categorized based on the voltage at which they operate, which can range between 5 and 12 volts.

2. Why are buzzers important?

Buzzers play a key role in keeping us informed and safe by producing different sound signals. They capture our attention and alert us when something significant happens, even when we are not gazing directly at a gadget. This allows us to hear warnings and notifications from across the room. These also make it easier to use technology, particularly on touchscreens or devices with few buttons. The sound effects allow us to engage more naturally and enjoy our experience by engaging more of our senses.

3. Is a buzzer AC or DC?

Buzzers usually run on direct current or DC and frequently have built-in oscillators to generate sound. This makes them easy to use with equipment powered by DC. Small transducers, such as sounders, require audio-frequency AC to function. It operate well with DC electricity, whereas sounders use AC to make sound.

4. Where can buzzers be used?

Buzzers are everywhere around us in our daily lives, providing useful sounds and notifications. They may be found in appliances such as washing machines and microwaves, alerting us when a cycle is complete. In automobiles, they indicate open doors and remind us to fasten our seat belts. Medical instruments, such as thermometers, use it to indicate when a reading is complete. And when it comes to safety, loud buzzers may alert us to dangers such as smoke or other problems.

5. How to reduce the buzzer sound?

To reduce the sound of a buzzer, cover a portion of its opening with a small piece of tape or thin foam. This will reduce the sound slightly without totally silence it. Another option is to lower the voltage going to the buzzer if your setup allows. This can make the buzzer less loud, but make sure you don’t drop the voltage too low or the buzzer might stop working. Try these tricks to make your buzzer more manageable.

6. How to increase the buzzer sound?

To boost buzzer volume, first ensure nothing blocks the speaker grille. Next, adjust the frequency using Arduino or microcontroller code—most buzzers have peak loudness at specific frequencies (typically 2–5 kHz). You can also increase voltage slightly within rated limits. For maximum volume, combine all three: optimize frequency, increase voltage safely, and remove obstructions.

7. Can these buzzers be used with Arduino and Raspberry Pi?

Yes, most buzzers and sirens in this collection work great with popular microcontroller platforms like Arduino and Raspberry Pi. Many modules run on 3.3 V or 5 V, which fits perfectly with these boards. Just choose a buzzer that matches your voltage needs, connect the ground and signal pins properly, and you’re ready to trigger tones, alerts, or beeps from your code. Raspberry Pi users may need a transistor or driver circuit for higher-power buzzers, since the Pi outputs 3.3 V. For simple projects, plug-and-play buzzer modules make integration quick and easy.

8. Are there loud sirens suitable for alarms?

Yes, the collection includes high-volume sirens designed for alarm and security applications. These sirens deliver strong sound output and are built to grab attention in loud environments. Many models operate on higher voltages like 12 V or 24 V to support loud output levels, making them ideal for emergency alarms, home security systems, and industrial alert projects. If you plan to control these sirens from a microcontroller, you may need a relay or driver circuit to handle the extra power, but once connected, they make for reliable and powerful alert systems.

9. How do I connect a buzzer module to a microcontroller?

Connecting a buzzer is simple. Begin by identifying the pins on the module, typically VCC, GND, and a signal/control pin. Connect VCC to the correct power supply, ground to the board’s ground, and the signal pin to a digital output pin on your controller. Active buzzers only need a HIGH or LOW signal to turn on and off, while passive buzzers use PWM to create different tones. After wiring, write a small program to trigger the buzzer. For louder devices or sirens, use a transistor or relay to safely supply power. With good wiring and the right supply, your microcontroller can control anything from a soft notification beep to a loud alarm blast.

Active & Passive Buzzers and Sirens for Electronics

Compare
MB27A - 27mm Average Continuous 1.5V to 27V DC
MB27A - 27mm Average Continuous 1.5V to 27V DC An audio signaling device like a beeper or buzzer may be electromechanical or piezoelectric or mechanical type. The main function of this is to convert the signal from audio to sound. Generally, it is powered...

Rs 30/-

Rs 30/-

~~Rs 36/-~~
Save Rs 6/-
Compare
MB27L2 - 27mm Loud Intermittent 1.5V to 15V DC
MB27L2 - 27mm Loud Intermittent Buzzer 1.5V to 15V DC A buzzer is a small yet efficient component to add sound features to our project/system. It is a very small and compact 2-pin structure hence can be easily used on breadboard, Perf Board and...

Rs 38/-

Rs 38/-

~~Rs 46/-~~
Save Rs 8/-
Compare
MB27F - 27mm Flat Loud Continuous
MB27F - 27mm Flat Loud Continuous Buzzer An audio signaling device like a beeper or buzzer may be electromechanical or piezoelectric or mechanical type. The main function of this is to convert the signal from audio to sound. Generally, it is powered through DC...

Rs 38/-

Rs 38/-

~~Rs 51/-~~
Save Rs 13/-
Compare
SQR117 - 220V AC Square Siren
SQR117 - 220V AC Square Siren Siren is a noisemaking device producing a piercing sound of definite pitch. This is a SQR117 - 220V AC Square Siren which can be used in your project for alarm purpose Though is called “Mini Siren” there is nothing mini about it the...

Rs 421/-

Rs 421/-

~~Rs 610/-~~
Save Rs 189/-
Compare

SmartElex Speaker Module – Digital Audio & Buzzer for Arduino and DIY Projects
SmartElex Speaker Module – Digital Audio & Buzzer for Arduino and DIY Projects The SmartElex Digital Speaker Module is a compact and versatile speaker module that delivers clear sound output for a variety of electronic and DIY applications. Designed with dual functionality, it works...

Rs 152/-

Rs 152/-

~~Rs 499/-~~
Save Rs 347/-

Notify me

Notify me
Compare

12V Piezo Buzzer Plate (27mm)
12V Piezo Buzzer Plate (27mm) Piezo Electric Sensor /Buzzer/Transducer-27mm , it is basically a device which converts voltage to vibration and vibration to voltage. It normally comes in handy to measure knock (knock sensor) or vibration (vibration sensor). Now a days it is also...

Rs 17/-

Rs 17/-

~~Rs 24/-~~
Save Rs 7/-

Notify me

Notify me
Compare

12 Volt Piezo Buzzer Plate (25mm)
12 Volt Piezo Buzzer Plate (25mm) A 12 Volt Piezo Buzzer Plate (Small) is a device that uses the piezoelectric effect to measure pressure, acceleration, strain or force by converting them to an electrical charge These devices can be used both as sensors and actuators,...

Rs 10/-

Rs 10/-

~~Rs 21/-~~
Save Rs 11/-

Notify me

Notify me
Compare

MB20 – 11mm PCB Mounting CT Buzzer (12V)
MB20 – 11mm PCB Mounting CT Buzzer (12V) The MB20 – 11mm PCB Mounting CT Buzzer is a compact, reliable, and easy-to-integrate audio indicator designed for a wide range of electronic circuits. Operating at 12V with a clear continuous tone, this buzzer offers stable...

Rs 7/-

Rs 7/-

~~Rs 17/-~~
Save Rs 10/-

Notify me

Notify me

Best Price Guarantee

Ready Stock for Bulk Purchase

Dedicated Account Managers

5% GST Benefits for Eligible SEZ and Edu

Technical Support Available

1-Year Manufacturer Warranty

Feature	Active Buzzer	Passive Buzzer
Sound generation	Has internal oscillator	Needs external signal (tone/PWM)
Control	Simple ON/OFF	Can play melodies, different tones
Ease of use	Very easy – treat like an LED	Slightly advanced – requires code for waveform
Typical use	Alarms, alerts, sirens, simple beeps	Games, music, special sound effects
Power behaviour	Fixed tone, predictable load	Current depends on driving frequency and duty

Device Type	Approx. Sound Level*	Typical Use Case
Small PCB piezo buzzer	~70–80 dB @ 10 cm	Basic alerts, toys, simple beeps
Active buzzer module (3–24 V)	~80–90 dB @ 10 cm	Alarms, doorbells, DIY projects
Mini 12V police/ambulance siren	~95–105 dB @ 1 m	Security alarms, warning sirens
220V industrial square siren	~110 dB+ @ 1 m	Industrial alerts, emergency systems

Buzzers & Sirens for Electronics Projects

Categories

Refined By Clear all

Availability

Price

Featured Products

Find Buzzers Sirens That Won’t Let You Down

All About Buzzers & Sirens for Electronics Projects

Buzzer

Buy Buzzers and Sirens

Arduino Wiring & Code Examples

Active Buzzer with Arduino (simple ON/OFF beep)

Passive Buzzer with Arduino (play tones)

Applications of Buzzers & Sirens

Types of Buzzer:

Sound Output & Decibel Guide

Sirens

Frequently Asked Questions

1. What is a buzzer?

2. Why are buzzers important?

3. Is a buzzer AC or DC?

4. Where can buzzers be used?

5. How to reduce the buzzer sound?

6. How to increase the buzzer sound?

7. Can these buzzers be used with Arduino and Raspberry Pi?

8. Are there loud sirens suitable for alarms?

9. How do I connect a buzzer module to a microcontroller?

Let customers speak for us

Buzzers & Sirens for Electronics Projects

Categories

Refined By Clear all

Availability

Price

Featured Products

Sort by:

Find Buzzers Sirens That Won’t Let You Down

All About Buzzers & Sirens for Electronics Projects

Buzzer

Buy Buzzers and Sirens

Arduino Wiring & Code Examples

Active Buzzer with Arduino (simple ON/OFF beep)

Passive Buzzer with Arduino (play tones)

Applications of Buzzers & Sirens

Types of Buzzer:

Sound Output & Decibel Guide

Sirens

Frequently Asked Questions

1. What is a buzzer?

2. Why are buzzers important?

3. Is a buzzer AC or DC?

4. Where can buzzers be used?

5. How to reduce the buzzer sound?

6. How to increase the buzzer sound?

7. Can these buzzers be used with Arduino and Raspberry Pi?

8. Are there loud sirens suitable for alarms?

9. How do I connect a buzzer module to a microcontroller?

Sign up for our newsletter

Shop the look

Choose Options

Edit Option

Back In Stock Notification

Compare

Choose Options

Let customers speak for us