-
CH376 USB Host Interface Module Flash Disk Drive RW ModuleCH376 USB Host Interface The "CH376S USB read/write module" has a CH376S chip onboard which does most of the hard work for you. All you have to do is send the module some commands from the Arduino and the CH376S chip will do the...
- Rs 224/-
- Rs 224/-
-
Rs 498/-
Save Rs 274/- -
SmartElex ATmega32 Development Board – AVR Microcontroller with Onboard USB ProgrammerSmartElex ATmega32 Development Board – AVR Microcontroller with Onboard USB Programmer The SmartElex ATmega32 Development Board is a reliable and easy-to-use platform designed to help you explore and experiment with the powerful AVR ATmega32 microcontroller. It comes with an onboard USB programmer, power supply...
- Rs 994/-
- Rs 994/-
-
Rs 1,659/-
Save Rs 665/- -
Microchip PIC12F675-E/P 8-Bit MicrocontrollerMicrochip PIC12F675-E/P 8-Bit Microcontroller The Microchip PIC12F675-E/P is a compact and efficient 8-bit microcontroller designed for embedded systems and low-power electronic applications. Based on Microchip’s RISC architecture, this microcontroller delivers fast performance with an instruction execution time of 200 nanoseconds and requires only 35...
- Rs 226/-
- Rs 226/-
-
Rs 324/-
Save Rs 98/- -
Microchip PIC16F1503 DIP 8-Bit MicrocontrollerMicrochip PIC16F1503 DIP 8-Bit Microcontroller The Microchip PIC16F1503 DIP is a versatile 8-bit microcontroller designed for efficient embedded systems and low-power electronic applications. Built on Microchip’s enhanced mid-range RISC architecture, it offers reliable performance with fast instruction execution and simplified programming, making it suitable...
- Rs 79/-
- Rs 79/-
-
Rs 154/-
Save Rs 75/- -
Microchip PIC16F887 DIP 8-Bit MicrocontrollerMicrochip PIC16F887 DIP 8-Bit Microcontroller The PIC16F887 DIP microcontroller from Microchip is a powerful and widely used 8-bit MCU designed for embedded systems, automation, and control applications. Built on Microchip’s reliable RISC architecture, it offers efficient performance, easy programmability, and a rich set of...
- Rs 299/-
- Rs 299/-
-
Rs 429/-
Save Rs 130/- -
NodeMCU ESP8266 AMICA CP2102 WiFi Development BoardNodeMCU ESP8266 AMICA CP2102 WiFi Development Board Presenting you with the NodeMCU ESP8266 WiFi development board. It is designed to cater to a wide range of wireless applications. This versatile NodeMCU board is equipped with the AMICA-CP2102 driver. It is interactive and programmable, with...
- Rs 236/-
- Rs 236/-
-
Rs 329/-
Save Rs 93/- -
Mini DF MP3 Player Module MP3-TF-16PMini DF MP3 Player Module MP3-TF-16P The compact DFPlayer Mini MP3 Module (also known as a df mini player or dfplayer mini) can connect directly to a speaker, making it a convenient audio playback solution for embedded and DIY electronics projects. It integrates perfectly...
- Rs 89/-
- Rs 89/-
-
Rs 149/-
Save Rs 60/- -
PICKit 3.5 ProgrammerPICKit 3.5 Programmer The PICkit 3.5 programmer allows debugging and programming of PIC and dsPIC Flash microcontrollers at the most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the...
- Rs 1,655/-
- Rs 1,655/-
-
Rs 2,679/-
Save Rs 1,024/- -
AVR USB ISP ProgrammerUSB ISP AVR Programmer This programmer is based on Thomas Fischl's USB ISP design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and...
- Rs 204/-
- Rs 204/-
-
Rs 334/-
Save Rs 130/- -
Arduino Mega 2560 + DHT11 Sensor ModuleMEGA 2560 Board compatible with Arduino + DHT11 Humidity and Temperature Sensor Module The MEGA 2560 R3 CH340G Board is a microcontroller board base on the ATmega2560. It has a USB host interface to connect with Android-based phones, based on the MAX3421e IC. The At Mega2560 has...
- Rs 1,482/-
- Rs 1,482/-
-
Rs 1,950/-
Save Rs 468/- -
SmartElex AT89S52 Microcontroller Development Board – 40-Pin DIP MCU with L298P Motor DriverSmartElex AT89S52 Microcontroller Development Board – 40-Pin DIP MCU with L298P Motor Driver The SmartElex AT89S52 Microcontroller Development Board is a versatile and beginner-friendly platform designed to help students, hobbyists, and engineers learn microcontroller programming with ease. Built around the AT89S52 8-bit MCU, this...
- Rs 1,378/-
- Rs 1,378/-
-
Rs 2,225/-
Save Rs 847/- -
ESP01 ESP8266 Wireless Transceiver ModuleESP01 ESP8266 Wireless Transceiver Module Hey, have you seen the ESP-01 ESP8266 WiFi Module? It’s a simple way to connect any microcontroller to WiFi since it has everything built in. You can run your own programs on it or let it handle the Wi-Fi...
- Rs 124/-
- Rs 124/-
-
Rs 199/-
Save Rs 75/- -
IR Proximity Sensor with SMD UNO Compatible with ArduinoIR Proximity Sensor with SMD UNO Compatible with Arduino The Arduino UNO SMD board is based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB...
- Rs 368/-
- Rs 368/-
-
Rs 410/-
Save Rs 42/- -
SD Card ModuleSD Card Module The module (MicroSD Card Adapter) is a Micro SD card reader module and the SPI interface via the file system driver, and microcontroller system to complete the Micro SD card read and write files. Users can directly use the Arduino IDE...
- Rs 44/-
- Rs 44/-
-
Rs 59/-
Save Rs 15/- -
SmartElex Aryabhatta 8051 Microcontroller AT89S52 Development Board with Integrated USB ProgrammerSmartElex Aryabhatta 8051 Microcontroller AT89S52 Development Board with Onboard USB Programmer The SmartElex Aryabhatta 8051 microcontroller development board is designed to make embedded system learning simple, affordable, and effective. Equipped with an onboard USB programmer, this board supports AT89S52 and 89S51 40-pin microcontrollers, allowing...
- Rs 791/-
- Rs 791/-
-
Rs 899/-
Save Rs 108/- -
3-Axis USB CNC Arduino Nano Controller A4988 Stepper Motor Driver Board3-Axis USB CNC Arduino Nano Controller A4988 Stepper Motor Driver Board Engraving Electronic Control Panel Material: PCB Model: LBA-B-V4 Dimension: 120*65mm Pitch size: 112*57mm Laser Power: 100mW to 5W Axis: XYZ Three Axis Power Supply: 12V Stepper Motor Power: Max 2 Limit Switch: 6...
- Rs 1,144/-
- Rs 1,144/-
-
Rs 1,232/-
Save Rs 88/- -
-
NodeMCU ESP8266 (AMICA-CP2102 driver) (Pack of 25)NodeMCU ESP8266 (AMICA-CP2102 driver) The Amica Node MCU development board is based on ESP8266 and is integrated with an onboard CP2102 USB-TTL converter. The Node MCU is an open-source firmware and development platform that helps you to prototype your IOT projects and bring them to life....
- Rs 6,965/-
- Rs 6,965/-
-
Rs 8,225/-
Save Rs 1,260/-
✨ Use RCAPP
and get 5% off 👇
Chat
