Bambu Lab P2S-Combo 3D Printer - Buy Online in India

Bambu Lab P2S-Combo 3D Printer

The Bambu Lab P2S-Combo 3D Printer is designed for creators who demand precision, durability, and reliability in every print. Built on advanced Fused Deposition Modeling (FDM) technology, it delivers a generous 256 × 256 × 256 mm build volume within a sturdy plastic-and-steel chassis and sleek glass exterior. The hardened steel nozzle and extruder gear ensure long-term performance even with abrasive filaments.

Supporting nozzle sizes from 0.2 mm to 0.8 mm, the P2S-Combo adapts effortlessly to fine detailing or fast prototyping. With high-precision motors and a flexible steel build plate, it offers consistent, professional-grade results for engineers, designers, and makers alike.

5-inch Touch Screen 

The P2S comes with a completely enhanced touchscreen and a robust processor, operating on our fresh, user-friendly second generation interface. Experience more fluid interactions, enhanced visuals, and more precise step-by-step guidance.

Print Smooth at Every Corner, Always

The P2S employs a sensor that operates with high resolution and frequency to assess flow dynamics. Smart algorithms continuously modify the flow rate in response to these measurements, ensuring accurate and uniform extrusion throughout each layer and every corner.

Adaptive Airflow System

In contrast to conventional cooling methods that recirculate warmed air, the P2S’s Adaptive Airflow System intakes cool air straight from the exterior of the chamber. This greatly enhances cooling performance, allowing you to safely print low temperature filaments with the door shut without concern for overhang integrity or blockages in the nozzle.

AI Error Detection

The P2S features state of the art AI visual technology that continuously identifies frequent printing problems like spaghetti and nozzle blobbing. Additionally, it evaluates your initial print settings to guarantee a secure and precise beginning for each printing task.

30-Second Nozzle Swap

The P2S includes a fast switch hotend configuration with an easy one clip system that detaches the complete nozzle and heatsink unit without needing to disconnect any wires. This significantly decreases the time needed to change nozzles and removes the possibility of wiring mistakes.

Reliable for Fiber-Reinforced Material Printing

P2S has designed its extrusion system and nozzle using toughened steel, providing remarkable strength and resistance to wear. They are specifically built for consistent, prolonged printing of advanced materials that contain fiber reinforcement.

Electromagnetic Air Vent

Automated releasing of air aids in moisture removal while drying and provides airtight enclosure that ensures high quality printing for several weeks.

Faster Multi-Color Printing

The motor that powers the PMSM increases the speed of filament delivery by 60%, resulting in an average time savings of 10 minutes for each 100 changes of filament.

Features:

• Multi material and multi color printing AMS 2 Pro enables automatic filament switching and active drying
• High speed performance Prints up to 600 mm per second with high acceleration
• AI based print monitoring Built in camera detects print failures in real time
• Smart user interface Five inch touchscreen with smooth second generation UI
• Enclosed and stable build chamber Improves print quality for engineering materials
• Large build volume 256 x 256 x 256 mm printing area
• Advanced cooling and filtration Adaptive airflow system with activated carbon filter
• Easy maintenance design Quick swap hotend for fast nozzle replacement
• Wide material compatibility Supports PLA ABS PETG TPU Nylon PC and composite filaments.