12V 5000RPM Peristaltic Dosing Pump - Buy Online in India

Specifications:

1. How to repair a 12V dosing pump?

To repair your dosing pump, always disconnect it from power first. You should then carefully inspect the tubing, rotor, and motor for any visible signs of wear or blockage. Replacing worn components is crucial for maintaining the performance of your peristaltic dosing pump.

2. How to know the dosing pump stroke setting?

The stroke setting on a dosing pump dictates its output volume, which is critical for accurate dosing. You can verify the volume dispensed per stroke using a calibration container. This process is essential for applications like water treatment where precision is key.

3. How to relate flow and pressure of a dosing pump?

For a dosing pump, the flow rate is inversely affected by the system pressure it is working against. To understand this relationship precisely, you must consult the pump's specific flow-pressure curve found in its datasheet. This is vital for achieving accurate chemical dosing under varying conditions.

4. How to set 2 ppm in a 12V dosing pump?

To achieve a concentration of 2 ppm with your 12V dosing pump, you must first calculate the required chemical flow rate for your system's volume. Adjust the pump's speed to match this rate and ensure your tubing installation is correct. Proper setup is essential for precise dosing.

5. How to write a dosing pump stroke adjustment procedure?

A good procedure for a dosing pump should start with safety precautions, followed by instructions for inspecting the tubing and rollers. Detail how to make adjustments and then verify the output volume using a graduated container. Following this process will extend the pump's service life.

6. How to maintain a small dosing pump for water treatment?

For a small dosing pump, routine maintenance should include inspecting the tubing, rollers, and motor for wear. Periodic calibration is also essential to ensure the pump continues to dose accurately. This is particularly important in critical water treatment applications where consistency is required.

7. How to check the dosing pump price before purchase?

When checking the dosing pump price, it is important to consider more than just the initial cost. Evaluate specifications like flow rate and the quality of the internal pump parts. Investing in a reliable peristaltic dosing pump ensures accuracy and reduces long-term costs for chemical dosing.

1. What is a dosing pump used for?

A dosing pump is a positive displacement pump used to inject chemicals or other substances into a flow of water, gas, or steam. Dosing pumps are typically small and precise to provide maximum control.

2. What is dosing pump in RO plant?

A dosing pump is a positive displacement pump used to deliver precise amounts of a chemical or other substance into a fluid stream. This industrial pump's mechanism involves drawing a measured amount of fluid into the chamber and then injecting this volume rate into the container being dosed.

3. What is difference between metering pump and a dosing pump?

A metering pump is a device that is used to add small but precise amounts of liquid to other fluid streams or vessels. Dosing and proportioning pumps are other names for metering pumps. A metering pump must be capable of delivering liquid with greater than 3% accuracy over a wide range of discharge pressures.

4. What is the purpose of dosing?

The purpose of dosing is to add a specific volume of liquid at a controlled rate, ensuring process accuracy and repeatability. It helps prevent overuse of chemicals, reduces waste, and maintains optimal system performance. This is especially important in processes involving sensitive chemical balances or fluid-based systems.

5. What is a peristaltic dosing system?

A peristaltic dosing system uses rotating rollers to compress flexible tubing and move fluid forward without contact with internal components. This design ensures that only the tubing comes into contact with the liquid, minimizing contamination risk. It’s ideal for sterile or corrosive fluid handling in precision environments.

6. Why is a dosing pump used?

A dosing pump is used to achieve accurate and repeatable fluid delivery, especially where manual control is impractical. It supports consistent chemical injection and maintains process stability in water treatment or lab automation. The positive displacement pump mechanism ensures each cycle delivers the same volume.

7. What is the speed of a dosing pump?

The 12V dosing pump operates at speeds up to 5000 RPM, enabling fast and adjustable liquid transfer. You can control the speed based on your required flow rate and the viscosity of the fluid being pumped. This high-speed capability makes it suitable for time-sensitive or high-throughput applications.

8. What type of pump is a dosing pump?

A dosing pump is typically a positive displacement pump, delivering a fixed volume per cycle. In a peristaltic dosing pump, rollers compress the tubing to push fluid forward, ensuring precise metering. This mechanism provides excellent control for applications demanding accurate fluid delivery.

Shipping Policy

• All orders confirmed before 3:00 PM IST are shipped the same day, barring rare pickup delays on holidays or disturbances.
• Delivery time in Metro cities is 1–3 days; for other locations, it is 3–7 days. Delivery varies based on location and courier service.

Return & Refund Policy

• Return window: 7 days from receipt unless stated otherwise.
• No refunds or replacements after the return window.
• Returns are accepted only for non-working or damaged products.
• Initiate return requests via a Support ticket or contact us at +91-8123057137.
• Refunds are processed within 3–4 working days after inspection and approval.