PACKING
the package of the parcel when i had recivied was in good condition
Robocraze BEST PRICE GUARANTEED
11
Couldn't load pickup availability
Technical Support & Easy Returns
Raise a TicketEarn RC Coins on Every Purchase
Rewards
Cash on Delivery Available
Cash Delivery
COUPON
When you shop for ₹ 2500 or more.Applicable on Checkout.
*Coupons are not applicable on Original Boards and Kits
This is XH-W3001 DC 24V 240W Digital Temperature Controller Microcomputer Thermostat Switch. A temperature measurement and Controller with high accuracy and precision at a very low cost.
The Digital Thermostat switch offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃. The LED Display shows the results clearly. One can directly install or embed the XH-W3001 in the industrial control equipment panel, which is convenient and quick.
It features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmentally protective.
Digital display LLL: If the digital tube displays LLL, the sensor is faulty. Please repair the sensor or replace the sensor.
Digital display HHH: If the digital tube displays HHH, this is because the detected temperature is beyond the measurement range.
DC Output | DC 24V 240W |
Temperature Measuring Range | 50~110°C |
Temperature Control Range | 50~110°C |
Control Accuracy | Up to 0.1℃ |
Dimensions | 11 x 5 x 3cms |
Weight | 150 grams |
For more details, please check our Shipping and Return Policy
11
27
9
Heating Mode | Cooling Mode |
Control the water heater: Heat it to 50 °C stop. When return the temperature to40 °C to start the heating again. How to set it? 1. Startup Temperature(40 °C) < Desired Temperature(50 °C). 2. Press and hold 3 seconds for the UP Button. When the temperature value flashes, press UP/DOWN BUTTON to adjust 40 °C. 3. Press and hold 3 seconds for the DOWN Button. When the temperature value flashes, press UP/DOWN BUTTON to adjust 50 °C. | The radiator is controlled: The heat is cooled to 26 °C stop. When temperature is raised to 30 °C to start the radiator again. How to set up? 1. Startup Temperature(30 °C) > Desired Temperature(26 °C). 2. Press and hold 3 seconds for the UP Button. When the temperature value flashes, press UP/DOWN BUTTON to adjust to 30 °C. 3. Press and hold 3 seconds for the DOWN Button. When the temperature value flashes, press UP/DOWN BUTTON to adjust to 26 °C. |