Robocraze BEST PRICE GUARANTEED
0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color
Let us know!
We'll try to match the price for you
For Best Price Contact on WhatsApp for bulk discounts!
Or Fill the Form Below
Couldn't load pickup availability
This is the 0.96" OLED display module 4 pin, it is made of 128x64 individual blue OLED pixels, and each one is turned on or off by the controller chip.
It works without a backlight, that is, in a dark environment this blue OLED display 0.96 Inch is higher compared to that of an LCD display you will like the miniature for its crispness. This makes it the best small OLED display for electronics projects where clarity and low power consumption are essential.
The driver chip of this 128×64 OLED display module for Arduino is SSD1315, which is compatible with I2C communication. This is an I2C OLED display with a 0.96 inch display, So this module can be controlled by I2C. If you are looking for 4-pin OLED display I2C module specs and pinout, this module offers a simple and efficient interface for quick integration.
That is, except for the VCC and GND, 2 wires would be needed when using 4-wires I2C mode, making it a convenient 0.96″ OLED screen for Arduino and Raspberry Pi based projects.
There is also a simple switch-cap charge pump that turns 5v into a low-voltage drive for the OLEDs. Considering its features and performance, the 0.96 inch OLED display module 4-pin price in India offers excellent value for hobbyists and professionals alike.
This is the best 0.96 inch 4pin IIC i2c OLED display module in the market to use in your Arduino project.
Not sure how to get started? Skip the raw GitHub libraries and check out our step-by-step walkthroughs on the Robocraze blog:
This module stands out as the best small OLED display for electronics projects due to its compact size, high contrast ratio, and low power consumption. Whether you are building IoT dashboards, wearable tech, or embedded systems, this 0.96″ OLED screen for Arduino and Raspberry Pi ensures seamless integration and reliable performance.
If you're evaluating the 0.96 inch OLED display module 4-pin price in India, this product delivers excellent performance at an affordable cost, making it a smart investment for students, makers, and engineers. Additionally, its simple wiring and clear 4-pin OLED display I2C module specs and pinout make it beginner-friendly.
Since this 0.96 inch OLED display uses the SSD1315 driver chip, it is 100% command-compatible with the widely popular SSD1306. This means you can use either of the two most popular Arduino/ESP32 libraries without any code modifications. Here is how to choose the right one for your project:
For Adafruit SSD1306:Adafruit_SSD1306 display(128, 64, &Wire, -1);
For U8g2:U8G2_SSD1306_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
Pro Tip: If your screen remains blank after uploading code, double-check that your I2C address is set to 0x3C in the library settings, as this is the default for our 4-pin module.
| Display Size | Resolution | Typical I2C Address | Best Use Case |
|---|---|---|---|
| 0.91 inch | 128 x 32 | 0x3C | Compact text-only displays |
| 0.96 inch | 128 x 64 | 0x3C / 0x3D | Balanced text & simple graphics (Most Popular) |
| 1.3 inch | 128 x 64 | 0x3C / 0x3D | Larger, highly readable dashboards |
Check out our wide range of collection of OLED display modules.
| Display Size | 0.96 inch |
| Display Type | OLED Display |
| Resolution | 128 x 64 Pixels |
| Driving Voltage | 3.3-5V |
| Interface Type | IIC |
| Weight | 5 grams |
| Dimensions | 2.7cm x 2.8cm |
The 0.96 inch OLED Display Module offers 128×64 pixel resolution. They are much thinner than LCD displays with good brightness and produce more accurate and true colors. This makes it the best small OLED display for electronics projects requiring compact UI displays.
Connections are generally easy. Start by connecting the VCC pin to the 3.3V output on the ESP32. Connect GND to the ground. After that connect the SCL pin to the I2C clock D22 pin and SDA to D21. This follows standard 4-pin OLED display I2C module specs and pinout.
It usually has a refresh rate between 60 and 120 Hz. It's important to understand that depending on the exact model and manufacturer, this frequency may vary slightly. There may be minor differences in refresh rate between different models or versions of the display.
This OLED display module uses the SSD1306 driver chip, which ensures reliable performance. It is widely used in 0.96″ OLED screen for Arduino and Raspberry Pi projects.
Yes, the 0.96 inch OLED display module is fully compatible with Arduino, ESP8266, ESP32, and other popular microcontrollers. It works well with standard libraries for OLED displays, making it ideal for IoT and embedded projects.
This 4-pin OLED display module supports I2C communication only. It uses four connections: VCC, GND, SCL and SDA, with a default I2C address of 0x3C.
The 0.96 inch OLED display offers a resolution of 128×64 pixels, providing clear text, graphics, and icons for DIY electronics, IoT dashboards, and wearable display projects.
The OLED display module operates at 3.3V to 5V, making it compatible with most Arduino and ESP boards without requiring additional level shifting, ensuring stable performance in embedded and IoT applications.
This is the 4-pin I2C variant (VCC, GND, SCL, SDA). A separate 7-pin SPI variant is also listed on Robocraze if you need SPI communication.
Good products and delivery
0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color
0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color
0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color
0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color
Thanks for subscribing!
This email has been registered!
| Product | SKU | Description | Collection | Availability | Product Type | Other Details |
|---|
I am highly impressed with the service. The support team resolved my print issue swiftly, and the delivery was both fast and securely packaged. The final print is of outstanding, A1 quality.
FlySky FS-CT6B 6ch 2.4GHz Transmitter & FS-R6B Receiver
It is Amazing and great item in this price
Veri usefull and cheap price from other shopping site, I use this module many project. Thank you robocraze
I am highly impressed with the service. The support team resolved my print issue swiftly, and the delivery was both fast and securely packaged. The final print is of outstanding, A1 quality.
Good
it works👍
Chat
