Skip to content
Free Delivery on Orders Above Rs 999/- Pan-India
Cash on Delivery Available for Orders above Rs.500/- and Upto Rs 3000/-
SAVE more when you BUY more. Upto 30% Off on BULK PURCHASE
GST Invoices for Your Business
Dedicated Technical Support Team
Safely Delivering Genuine Products PAN INDIA

Jetson Orin Nano vs Raspberry Pi 5: Best Board for AI

Jetson Orin Nano vs Raspberry Pi 5: Best Board for AI
-
Written By - Robocraze -
📅 Updated on 19 Nov 2026
✨ Summarize with AI
✅ Prompt copied

Summary

Jetson Orin Nano Super or Raspberry Pi 5 for AI? The Jetson’s 67 TOPS and CUDA suit real-time vision, robotics and on-device LLMs up to 8B. The Pi 5, with an AI HAT+, handles light vision affordably. We compare specs, YOLO, LLMs, software, setup costs in India and best-fit projects.

Jetson Orin Nano Super vs Raspberry Pi 5: Which To Choose for AI Projects? - Cover Image

Choose the Jetson Orin Nano Super if your project needs real-time computer vision or a small LLM running on the device. It delivers 67 TOPS and full CUDA support. Choose the Raspberry Pi 5 for general projects and learning, and add the AI HAT+ for light vision work at a much lower cost.

These are the two boards Indian makers, students, and labs ask us about most when a project needs to see, listen, or talk. In this Jetson Orin Nano vs Raspberry Pi 5 guide we compare specs, real AI workloads, software, total setup cost, and the projects best suited to each board.

NVIDIA Jetson Orin Nano Super 8GB Developer Kit
NVIDIA Jetson Orin Nano Super 8GB Developer Kit
Raspberry Pi 5
Best for: real-time vision, robotics, on-device LLMs and VLMs Best for: learning, IoT, home automation, light AI vision
67 TOPS (INT8, sparse), 1024-core Ampere GPU, 8GB LPDDR5 Quad-core 2.4GHz Cortex-A76, up to 16GB RAM, PCIe for AI HAT+
Check price and availability → Shop Raspberry Pi 5 boards and kits →

Jetson Orin Nano Super Specs vs Raspberry Pi 5

The biggest difference isn't on the spec sheet: the Jetson has its AI engine built in, while the Pi 5 gets one only with an AI HAT+. Here's how the two compare side by side.

Spec Jetson Orin Nano Super Dev Kit Raspberry Pi 5
CPU 6-core Arm Cortex-A78AE, 1.7GHz 4-core Arm Cortex-A76, 2.4GHz
GPU NVIDIA Ampere, 1,024 CUDA cores, 32 Tensor Cores, 1,020MHz VideoCore VII, 800MHz (graphics, not used for AI)
AI accelerator Built into the GPU None onboard. Add AI HAT+ (Hailo-8L or Hailo-8) or AI HAT+ 2 (Hailo-10H)
AI performance 67 TOPS INT8 sparse (33 dense), 17 TFLOPS FP16 AI HAT+: 13 or 26 TOPS. AI HAT+ 2: 40 TOPS INT4
RAM 8GB 128-bit LPDDR5, 102GB/s, shared by CPU and GPU 2GB to 16GB LPDDR4X (AI HAT+ 2 adds its own 8GB)
Storage microSD + M.2 Key M slots for NVMe SSD microSD; NVMe through an M.2 HAT (shares the single PCIe lane)
Camera inputs 2x MIPI CSI-2 (22-pin) 2x 4-lane MIPI camera/display connectors
Power 7W, 15W or 25W modes; 19V DC adapter in the box 5V/5A USB-C; official 27W supply recommended
Software JetPack 6.2 (Ubuntu), CUDA, cuDNN, TensorRT Raspberry Pi OS (Debian), Hailo runtime, rpicam-apps

A quick word on TOPS: the numbers aren't measured the same way. NVIDIA's 67 is INT8 with sparsity, the AI HAT+ figures are INT8, and the AI HAT+ 2's 40 is INT4. Treat TOPS as a rough tier, not a scoreboard.

Where AI inference runs on each board · simplified block diagram

On the Pi, a model has to be converted for the Hailo NPU before it can run. On Jetson, the same PyTorch or ONNX model trained on a laptop runs on the GPU, usually sped up with TensorRT. New to running AI on the device itself? Our explainer on what edge computing is is a good place to start.

Components and Supplies

TWOWIN NVIDIA Jetson Orin Nano Super 8GB 67TOPS Development Kit -Nvidia Jetson Nano -Jetson Nano Boards -RobocrazeTWOWIN NVIDIA Jetson Orin Nano Super 8GB 67TOPS Development Kit -Nvidia Jetson Nano -Jetson Nano Boards -Robocraze

NVIDIA Jetson Orin Nano Super 8GB RAM 67TOPS Development Kit

NVIDIA Jetson Orin Nano Super 8GB RAM 67TOPS Development Kit NVIDIA Jetson Orin Nano Super 8GB RAM 67TOPS Development Kit is a powerful and compact AI development platform built around the NVIDIA Jetson Orin Nano Super module. Designed for developers, engineers, makers, and students,...
Rs 69,999/-
Rs 69,999/-
Rs 74,699/-
Save Rs 4,700/-
Official Raspberry Pi 5 Model 8GB RAM – High-end Raspberry Pi Board with 8GB RAM for intensive computing. -RobocrazeOfficial Raspberry Pi 5 Model 8GB RAM – High-end Raspberry Pi Board with 8GB RAM for intensive computing. -Robocraze

    Official Raspberry Pi 5 Model 8GB RAM Development Board

    Raspberry Pi 5 Model 8GB RAM The Official Raspberry Pi 5 Model 8GB RAM is the most powerful Raspberry Pi single-board computer developed to date, delivering significantly higher CPU performance, faster graphics processing, improved connectivity, and expanded I/O capabilities compared to previous generations. Powered...
    Rs 19,989/-
    Rs 19,989/-
    Rs 25,473/-
    Save Rs 5,484/-
    Official Raspberry Pi AI HAT+ 26 TOPS -Raspberry Pi -Raspberry Pi Boards -RobocrazeOfficial Raspberry Pi AI HAT+ 26 TOPS -Raspberry Pi -Raspberry Pi Boards -Robocraze

    Official Raspberry Pi AI HAT+ 26 TOPS

    Official Raspberry Pi AI HAT+ 26 TOPS The Raspberry Pi AI HAT+ is a revolutionary add-on board that transforms your Raspberry Pi into a powerful AI processing platform with an impressive 26 TOPS (Trillion Operations Per Second) of dedicated neural processing power. As a...
    Rs 11,309/-
    Rs 11,309/-
    Rs 18,499/-
    Save Rs 7,190/-
    Official Raspberry Pi M.2 HAT+ – Enables M.2 SSD compatibility for enhanced storage -RobocrazeOfficial Raspberry Pi M.2 HAT+ – Enables M.2 SSD compatibility for enhanced storage -Robocraze

      Official Raspberry Pi M.2 HAT+

      Official Raspberry Pi M.2 HAT+ The Raspberry Pi M.2 HAT+ connects M.2 peripherals like NVMe drives and AI accelerators to the Raspberry Pi 5’s PCIe 2.0 interface, supporting data transfers up to 500 MB/s. The Raspberry Pi HAT+ features a 16-pin FPC connector and...
      Rs 1,530/-
      Rs 1,530/-
      Rs 2,299/-
      Save Rs 769/-
      Official Raspberry Pi Camera Module V2 - 8MP – Compact Camera Module with 8MP & 1080p. -RobocrazeOfficial Raspberry Pi Camera Module V2 - 8MP – Compact Camera Module with 8MP & 1080p. -Robocraze

      Official Raspberry Pi Camera Module V2 - 8 Megapixel,1080p

      Official Raspberry Pi Camera Module V2 - 8 Megapixel,1080p The Raspberry Pi Camera Module V2 is an excellent little camera developed for Raspberry Pi boards. It contains an 8-megapixel Sony IMX219 image sensor for capturing clear and vibrant photographs. You can also capture films...
      Rs 1,695/-
      Rs 1,695/-
      Rs 2,799/-
      Save Rs 1,104/-
      Official Raspberry Pi AI HAT+ 13 TOPS -Raspberry Pi -Raspberry Pi Hats -RobocrazeOfficial Raspberry Pi AI HAT+ 13 TOPS -Raspberry Pi -Raspberry Pi Hats -Robocraze

        Official Raspberry Pi AI HAT+ 13 TOPS

        Official Raspberry Pi AI HAT+ 13 TOPS The Raspberry Pi AI HAT+ 13 TOPS is a high-performance AI accelerator designed to elevate your Raspberry Pi projects. Powered by the Hailo 8L processor, this official Raspberry Pi AI HAT+ 13 TOPS delivers a remarkable 13...
        Rs 7,749/-
        Rs 7,749/-
        Rs 11,999/-
        Save Rs 4,250/-
        Raspberry Pi 5 4GB – Reliable Raspberry Pi Board with 4GB RAM for DIY and industrial applications. -RobocrazeRaspberry Pi 5 4GB – Reliable Raspberry Pi Board with 4GB RAM for DIY and industrial applications. -Robocraze

          Raspberry Pi 5 4GB

          Raspberry Pi 5 4GB The Raspberry Pi 5 4GB is the latest generation single-board computer (SBC) from Raspberry Pi, delivering a significant performance boost over previous models. Powered by a 2.4GHz quad-core 64-bit Arm Cortex-A76 processor, it offers faster processing, improved graphics, enhanced connectivity,...
          Rs 13,455/-
          Rs 13,455/-
          Rs 16,129/-
          Save Rs 2,674/-
          SanDisk 64GB Micro SD-SDHC Card – Durable Raspberry Pi SD card for efficient data storage. -RobocrazeSanDisk 64GB Micro SD-SDHC Card – Durable Raspberry Pi SD card for efficient data storage. -Robocraze

            SanDisk 64GB Micro SD-SDHC Memory Card

            SanDisk 64GB Micro SD-SDHC Memory Card The SanDisk 64GB Micro SDXC Memory Card provides dependable storage for Raspberry Pi projects, development boards, smartphones, cameras, and other compatible devices. With 64GB of storage, it gives you enough space for operating systems, applications, project files, photos,...
            Rs 1,889/-
            Rs 1,889/-
            Rs 1,999/-
            Save Rs 110/-
            Raspberry Pi 5 27W USB-C Power Supply Black Colour

            Official Raspberry Pi 5 27W USB-C PD Power Supply (Black)

            Official Raspberry Pi 5 27W USB-C PD Power Supply (Black) The Official Raspberry Pi 5 27W USB-C PD Power Supply (Black) is the recommended power adapter for the Official Raspberry Pi 5 Model 8GB RAM, including the 2GB and 4GB versions, delivering stable, efficient,...
            Rs 1,342/-
            Rs 1,342/-
            Rs 2,299/-
            Save Rs 957/-
            Raspberry Pi Active Cooler – High-performance Raspberry Pi Accessories for efficient cooling and stability. -RobocrazeRaspberry Pi Active Cooler – High-performance Raspberry Pi Accessories for efficient cooling and stability. -Robocraze

              Raspberry Pi 5 Active Cooler

              Raspberry Pi 5 Active Cooler The Raspberry Pi 5 Active Cooler is the perfect solution for users who demand efficient and silent cooling for their Raspberry Pi 5 during sustained heavy use. As an official Raspberry Pi 5 active cooler, it combines a large...
              Rs 515/-
              Rs 515/-
              Rs 1,019/-
              Save Rs 504/-

              Computer Vision: YOLO, Cameras, and FPS Expectations

              Both boards can run YOLO on a live camera feed, but they get there differently. The Pi 5 needs an AI HAT+ to do it smoothly. The Jetson runs it on its GPU out of the box and has room left over for bigger models and more cameras.

              Raspberry Pi 5 + AI HAT+

              On its CPU alone, the Pi 5 handles what Raspberry Pi calls sparse, quantised or intermittent AI work: a detection every few seconds, or a classifier on a still photo. For smooth video, add the AI HAT+. According to Raspberry Pi, the 26 TOPS version can run object detection, pose estimation, and subject segmentation at the same time on a live camera feed. The newer AI HAT+ 2 delivers vision performance broadly equivalent to the 26 TOPS model.

              The big plus is how well it fits into the Pi's camera software: rpicam-apps and Picamera2 can hand frames straight to the NPU. The catch is that custom models must be compiled for Hailo first. That's easy for standard YOLO variants and harder for unusual architectures. New to Pi AI? Our beginner's guide to AI on Raspberry Pi walks through the basics.

              Jetson Orin Nano Super

              On Jetson, YOLO (or any PyTorch or ONNX model) is exported to TensorRT and runs on the GPU. There's no separate compiler and no list of supported layers to check. NVIDIA hasn't published official YOLO numbers for the Super kit, but it has published these vision-model results:

              Vision model (TensorRT, FP16) Orin Nano Super, frames/sec
              CLIP ViT-B/32 314
              ViT-base, patch16, 224 158
              DINOv2-base, patch14 126
              SAM2 base 6.34
              Grounding DINO 6.23

              These are heavier models than a typical YOLOv8n, so a well-tuned YOLO pipeline usually has room to spare.

              What FPS to Expect

              Here's what decides real-world FPS:

              • Model size: nano and small YOLO variants are far faster than medium and large ones.
              • Input resolution: 640x640 is the usual sweet spot; 1280 costs roughly four times the compute.
              • Precision: INT8 and FP16 are much faster than FP32.
              • Number of streams: two cameras roughly halve the per-camera budget.
              • CPU work around the model: resizing, drawing boxes and tracking all add time.

              A 30 fps camera leaves about 33 ms per frame for everything. We recommend benchmarking the full pipeline with trtexec on Jetson or hailortcli run on the Pi before locking in a design.

              # Example: Benchmarking a YOLO model on Jetson Orin Nano Super
              trtexec --onnx=yolov8n.onnx --fp16 --saveEngine=yolov8n.engine --avgRuns=100
              
              # Example: Running a compiled model on Raspberry Pi 5 with AI HAT+
              hailortcli run yolov8n.hef
              

              Cameras

              The Pi 5 supports the full official camera range through libcamera. On Jetson, IMX219-based modules (like the Raspberry Pi Camera v2) work with JetPack out of the box; for other sensors, we suggest checking driver support before buying. USB webcams work on both boards for quick prototypes.

              Running Small LLMs and Speech Models

              The Jetson runs everyday open-source LLMs up to about 8 to 9 billion parameters on its GPU. The Pi 5 needs the AI HAT+ 2 and runs a shorter list of 1 to 1.5 billion parameter models compiled for it.

              Jetson Orin Nano Super

              NVIDIA built the Super update around generative AI, quoting up to 1.7x faster LLM performance than the original kit. Here are NVIDIA's published LLM benchmarks for the Super kit:

              Model (INT4, MLC API) Orin Nano Super, tokens/sec
              SmolLM2 1.7B 64.5
              Llama 3.2 3B 43.07
              Phi 3.5 3B 38.1
              Gemma 2 2B 34.97
              Qwen2.5 7B 21.75
              Llama 3.1 8B 19.14
              Gemma 2 9B 9.21

              Source: NVIDIA Technical Blog, Jetson Orin Nano Super launch post. INT4 quantization, MLC API.

              The same post shows vision-language models working too: PaliGemma2 3B at 21.6 tokens/sec and SmolVLM 2B at 12.9 tokens/sec. That's enough for a robot that describes what its camera sees. Tools like Ollama, llama.cpp and MLC all run here, and NVIDIA's Jetson AI Lab has step-by-step tutorials. One thing to watch: the 8GB is shared, so a 4-bit 8B model leaves little room for anything else.

              Raspberry Pi 5 + AI HAT+ 2

              The original AI HAT+ is built for vision and isn't meant for LLMs. The AI HAT+ 2 changes that. It has a Hailo-10H accelerator and 8GB of its own RAM, so the Pi's memory stays free for the application. At launch, Raspberry Pi listed these models:

              • DeepSeek-R1-Distill (1.5B)
              • Llama 3.2 (1B)
              • Qwen2.5-Coder (1.5B)
              • Qwen2.5-Instruct (1.5B)
              • Qwen2 (1.5B)

              They run through the hailo-ollama server with an Open WebUI chat front end. Raspberry Pi hasn't published tokens-per-second figures. The Pi 5 CPU can also run tiny models through llama.cpp or Ollama with no HAT at all. It's a fun way to learn, but too slow for a responsive assistant.

              Speech models

              Neither company publishes official speech benchmarks for these boards. In practice, small speech-to-text models such as Whisper tiny and base, plus lightweight text-to-speech engines, run on both. On Jetson, the GPU speeds up speech recognition, so a fully offline voice assistant (listen, think with an LLM, speak) is a realistic build. On the Pi, stick to small models and short commands for a snappy experience.

              Software and Community: JetPack vs Raspberry Pi OS

              In our experience, the Raspberry Pi is easier to start with. The Jetson is easier to grow with once your project gets serious about AI.

              Jetson (JetPack 6.2) Raspberry Pi 5 (Raspberry Pi OS)
              Base OS Ubuntu-based Linux Debian-based Linux
              AI stack CUDA, cuDNN, TensorRT, DeepStream, Isaac ROS Hailo runtime, rpicam-apps, Picamera2; TFLite and ONNX Runtime on CPU
              Your own models PyTorch or ONNX straight to the GPU, TensorRT to speed up Compile to Hailo .hef with the Dataflow Compiler, or run on the CPU
              First boot Flash an SD card image or use SDK Manager; update firmware for Super mode Raspberry Pi Imager, boot, done
              Community Large robotics and CV community, NVIDIA forums, Jetson AI Lab Huge maker and education community, endless beginner tutorials
              Learning curve Moderate: Linux, Docker containers, GPU tools Gentle: ideal for first-time Linux users

              The Pi's biggest strength is its community. Almost any sensor, display, or motor driver has a Pi tutorial, which makes it the go-to board for mixed projects where AI is only one part. The Jetson's strength is that industry tools run on it unchanged. Skills learned on it carry straight over to NVIDIA's bigger Orin and Thor modules. Coming from the older board? Our deep dive on the original Jetson Nano and edge AI gives useful background.

              Total Cost of a Working Setup

              Even with an AI HAT+, a complete Raspberry Pi 5 AI setup costs roughly a third to half as much as a working Jetson setup. Our tip: compare full setups, not board prices. The Jetson kit includes its power adapter and fan, while the Pi needs both bought separately.

              Item Jetson Orin Nano Super setup Raspberry Pi 5 AI setup
              Board Orin Nano Super 8GB Dev Kit: ₹69,000–₹75,000 Raspberry Pi 5, 4GB or 8GB: ₹13,000–₹20,000
              AI accelerator Built in AI HAT+ 13 TOPS or 26 TOPS: ₹7,400–₹11,500
              Storage NVMe SSD, 256–512GB: ₹2,000–₹4,500 64GB microSD: ₹1,700–₹1,900
              Power 19V adapter included Official 27W USB-C supply: ₹1,200–₹1,300
              Cooling Fan heatsink included Active Cooler: ₹500–₹600
              Camera IMX219 CSI camera: ₹1,500–₹3,500 Pi camera (5MP to Camera Module 3): ₹300–₹3,500
              Total About ₹72,500–₹83,000 About ₹24,000–₹39,000 (₹17,000–₹27,500 without the AI HAT+)

              Our advice for beginners: start with the Pi 5. A common path is to prototype the pipeline on a Pi, then move to Jetson once the model or frame rate outgrows it. Looking for starter ideas first? Check out our fun beginner projects for the Raspberry Pi 5.

              Which One for Which Project?

              Use the Pi 5 when AI is one feature of a bigger build. Use the Jetson when AI is the build. We've boiled the choice down to three quick questions:

              Use the Jetson when AI is the build
              Project Best pick Why
              Smart home, IoT dashboard, weather station Raspberry Pi 5 Huge GPIO and HAT ecosystem; no heavy AI needed
              People counter or intruder alert, one camera Pi 5 + AI HAT+ Standard YOLO models run on the NPU with the Pi camera stack
              Posture or fitness coach Pi 5 + AI HAT+ (26 TOPS) Pose estimation is supported out of the box
              Offline chatbot or coding helper Pi 5 + AI HAT+ 2 Runs 1–1.5B models such as Qwen2.5-Coder locally
              Voice assistant with a 3B–8B LLM Jetson Orin Nano Super GPU and 102GB/s memory handle bigger models
              Autonomous robot with ROS 2 and SLAM Jetson Orin Nano Super Isaac ROS and CUDA-accelerated perception
              Multi-camera traffic or factory inspection Jetson Orin Nano Super DeepStream handles several video streams
              Robot that describes what it sees (VLM) Jetson Orin Nano Super NVIDIA lists VLMs like PaliGemma2 3B running on it
              Final-year project with a custom-trained model Jetson Orin Nano Super Your PyTorch model runs without a conversion step

              Setting Up an AI Lab? Let's Talk Bulk

              Equipping a college AI lab, an AICTE IDEA Lab or a school ATL? Many labs mix the two boards: Raspberry Pi 5 kits for every student bench, and a few Jetson Orin Nano Super kits for advanced projects and research. Our team can help you plan the right mix, bundle cameras, storage and accessories, and arrange bulk pricing with GST invoices for your institution.

              Request a bulk quote for your lab →

              Final Thoughts

              The Jetson Orin Nano Super vs Raspberry Pi 5 debate has a simple answer once the project is clear. The Pi 5 is the most beginner-friendly way into edge AI, and the AI HAT+ makes real-time vision affordable. When a project needs larger models, several cameras, or an LLM that actually feels responsive, the Jetson's 67 TOPS and CUDA stack are worth the extra cost.

              Ready to build? Start your edge AI journey with the Jetson Orin Nano Super or the Raspberry Pi 5 today!

              Excerpt

              Jetson Orin Nano Super vs Raspberry Pi 5 for AI: specs, YOLO, LLMs, AI HAT+, total setup cost in India and which board fits your project. Read the guide.

              Frequently Asked Questions

              1. Is Jetson Orin Nano better than Raspberry Pi 5 for AI?

              For heavy AI, yes. It has 67 TOPS, CUDA and enough memory bandwidth to run LLMs up to about 8B parameters. For light vision tasks and general projects, a Raspberry Pi 5 with an AI HAT+ gives better value for money.

              2. How many TOPS does the Orin Nano Super have?

              67 TOPS (INT8, sparse), or 33 TOPS dense, in the MAXN SUPER power mode. That's up from 40 TOPS on the original Orin Nano Developer Kit.

              3. Can Raspberry Pi 5 run YOLO?

              Yes. On the CPU alone it suits occasional detections rather than smooth video. With the AI HAT+, YOLO runs on the Hailo NPU in real time, and Raspberry Pi's camera software has ready-made object detection examples.

              4. Can we run an LLM on Jetson Orin Nano?

              Yes. NVIDIA's benchmarks show Llama 3.2 3B at 43.07 tokens/sec and Llama 3.1 8B at 19.14 tokens/sec with 4-bit quantization. We recommend Ollama, llama.cpp or MLC to get started.

              5. Which is better for a final year AI project?

              If AI is the heart of the project (a custom-trained model, an LLM, or a robot), go with the Jetson Orin Nano Super. If AI is one feature, such as detecting people for a smart-security build, a Raspberry Pi 5 with the AI HAT+ keeps costs low and is easier to set up.

              6. Do we need a fan for Jetson Orin Nano?

              The Developer Kit already ships with a fan-equipped heatsink, so there's no need to buy one. Keep it fitted and give it airflow, especially in the 25W MAXN SUPER mode or inside an enclosure. On the Pi 5, add the Active Cooler when running AI workloads.

              7. Can I use a Raspberry Pi camera with the Jetson Orin Nano?

              Often, yes. IMX219-based cameras such as the Raspberry Pi Camera v2 work with JetPack out of the box using a 22-pin cable. For newer sensors such as Camera Module 3, check for a Jetson driver before buying.

              8. I own the original Orin Nano Developer Kit. Do I need to buy the Super?

              No. The Super uses the same hardware. Update to the latest JetPack and switch to the MAXN SUPER power mode to unlock 67 TOPS and the faster generative AI performance.

              Prev Post
              Next Post

              Leave a comment

              Please note, comments need to be approved before they are published.

              Thanks for subscribing!

              This email has been registered!

              Shop the look

              Choose Options

              Edit Option
              Back In Stock Notification
              Compare
              Product SKU Description Collection Availability Product Type Other Details

              Choose Options

              this is just a warning
              Login
              Shopping Cart
              0 items
              FREE SHIPPING!
              ₹100 OFF
              ₹200 OFF
              ₹999
              ₹2500
              ₹4900
              WhatsApp Chat Chat