Radiolink R6DSM Mini Drone Receiver 2.4Ghz 10 Channels For Racing Drones, Quadcopter Aircrafts - Buy Online in India

Package Includes 

• 1 x Radiolink R6DSM Mini Drone Receiver 2.4Ghz 10 Channels For Racing Drones, Quadcopter Aircrafts

Specifications

1. How to bind the Radiolink R6DSM Mini Drone Receiver 2.4GHz 10 Channels with your transmitter?

Press and hold the bind button on the Radiolink R6DSM mini drone receiver while powering it on—the LED will flash rapidly to indicate bind mode. Activate bind mode on your compatible transmitter to initiate pairing. Once the LED turns solid, the RC Receiver 10 Channels is successfully linked and ready for use. This secure connection ensures reliable, low-latency control for high-speed drone applications.

2. How to install the Radiolink R6DSM mini drone receiver board on a racing drone or quadcopter?

Mount the mini drone receiver board centrally on your frame using vibration-damping foam tape or a soft silicone pad to minimize mechanical noise. Connect the signal, power, and ground wires to the corresponding pins on your flight controller, ensuring correct polarity. This RC receiver racing drones setup maintains stable signal transmission even during aggressive maneuvers. Avoid placing near high-EMI sources like ESCs or motors.

3. How to switch between SBUS and DSM output modes on the Radiolink R6DSM receiver?

Press and hold the bind button while powering on the Radiolink R6DSM receiver—the LED will change color or blink pattern to confirm mode toggle. Release once the new state is indicated to lock in either SBUS or DSM output. This allows seamless integration with various flight controllers used in mini drones and quadcopters. Always verify the selected mode in your flight controller’s input settings.

4. How to ensure a stable signal connection with the Radiolink R6DSM 2.4GHz mini drone receiver?

Position the two antennas at a 90° angle to each other and route them along the frame arms for maximum RF coverage. Keep the Radiolink R6DSM 2.4GHz mini drone receiver away from carbon fiber, metal, and high-power components that can block or reflect signals. This ensures consistent 2.4GHz communication during fast-paced flights and acrobatic sequences.

5. How to set up the failsafe mode on the Radiolink R6DSM RC Receiver 10 Channels?

With your transmitter powered on, position the control sticks and switches to safe defaults—such as zero throttle and neutral surfaces. Press and hold the bind button on the Radiolink R6DSM RC Receiver 10 Channels for 3–5 seconds until the LED blinks differently, confirming failsafe storage. This ensures your mini drone receiver defaults to a safe state during signal loss, preventing uncontrolled flight.

6. How to check compatibility of the Radiolink R6DSM mini drone receiver board with other transmitters?

The Radiolink R6DSM mini drone receiver is designed to work with Radiolink transmitters like AT9S, AT10II, and T8FB. Ensure both receiver and transmitter are running updated firmware for seamless binding. Verify that the transmitter supports DSM or SBUS protocol depending on your selected mode. Always consult the compatibility list before pairing with third-party systems.

7. How to mount the Radiolink R6DSM RC receiver for racing drones for best performance?

Install the RC receiver racing drones version in a central, low-vibration area of the frame, using soft mounting to reduce signal noise. Extend the antennas fully and position them perpendicularly to maximize spatial diversity. Keep antenna tips clear of obstructions and conductive materials for optimal range. This setup ensures consistent control and responsiveness in racing drones, quadcopters, or small aircrafts.

1. What is the Radiolink R6DSM Mini Drone Receiver used for?

The Radiolink R6DSM Mini Drone Receiver is an incredibly small receiver that provides precise and reliable control for your high-performance aircraft. As a dedicated mini drone receiver board, it's the perfect choice for building lightweight racing drones and custom quadcopters. It operates on a stable 2.4GHz signal, ensuring you have a locked-in connection for aggressive flying.

2. How many channels does the R6DSM support?

This tiny receiver is a full RC Receiver 10 Channels, giving you plenty of control for complex setups. These channels provide you with multiple connection points for your motors, servos, and other auxiliary functions. This makes it a perfect choice for advanced racing drone configurations.

3. Can the R6DSM Mini Drone Receiver be used for racing drones?

Yes, absolutely! The R6DSM mini drone receiver is specifically designed for this purpose and is an excellent RC Receiver for racing drones. It offers extremely low latency, which provides the instant and responsive control that is crucial for a successful race. This gives you the precision you need during high-speed flight.

4. Is the R6DSM compatible with other Radiolink transmitters?

Yes, this versatile mini drone receiver board is designed to work seamlessly with a variety of popular Radiolink transmitters. This includes models such as the AT9, AT9S, and AT10II, ensuring easy pairing and a reliable link. This wide compatibility makes it a top choice for serious competitive drone flying.

Shipping Policy

• All orders confirmed before 3:00 PM IST are shipped the same day, barring rare pickup delays on holidays or disturbances.
• Delivery time in Metro cities is 1–3 days; for other locations, it is 3–7 days. Delivery varies based on location and courier service.

Return & Refund Policy

• Return window: 7 days from receipt unless stated otherwise.
• No refunds or replacements after the return window.
• Returns are accepted only for non-working or damaged products.
• Initiate return requests via a Support ticket or contact us at +91-8123057137.
• Refunds are processed within 3–4 working days after inspection and approval.