Found a better price?
Let us know!
We'll try to match the price for you
3D Printer Ramps 1.4 Adapter LCD2004 Module/12864 Control Panel Adapter Display
This adapter is for RAMPS 1.4 Smart Controller LCD 2004 & LCD 12864 Can easily connect it to your RAMPS1.4 shield using this smart adapter. After connecting the panel to your RAMPS1.4 shield you can print your 3D designs without a PC, just with a g-code design stored on the SD card.
This adapter applies to the smart control panel LCD2004 and LCD12864 of the Ramps1.4 board. You can easily connect the smart control panel to the Ramps1.4 board. When the panel is attached to your Ramps1.4 board, you do not need to print the 3D design via your computer, you can only design it on the SD card that has been stored in the G code.
- 1 x 3D Printer Ramps 1.4 Adapter LCD2004 Module/12864 Control Panel Adapter Display
|Material||Plastic & PCB|
|Dimensions (mm)||62 x 21 x 19 (L x W x H)|
1.What is the purpose of the 3D Printer Ramps 1.4 Adapter LCD2004 Module?
- The 3D Printer Ramps 1.4 Adapter LCD2004 Module is used to connect an LCD display to a RAMPS 1.4 control board in a 3D printer. This allows you to control and monitor your 3D printer more easily and effectively, as the module provides real-time information about your printer's status and progress, as well as a simple button interface for controlling the printer.
2.How do I install the 3D Printer Ramps 1.4 Adapter LCD2004 Module on my 3D printer?
- To install the 3D Printer Ramps 1.4 Adapter LCD2004 Module on your 3D printer, connect it to the RAMPS 1.4 control board and the LCD display with a ribbon cable. You will also need to update your firmware to include module support, which is typically accomplished by uploading new firmware to the control board via USB cable and a software programme such as the Arduino Integrated Development Environment (IDE).