I am highly impressed with the service. The support team resolved my print issue swiftly, and the delivery was both fast and securely packaged. The final print is of outstanding, A1 quality.
FlySky FS-CT6B 6ch 2.4GHz Transmitter & FS-R6B Receiver
Mini OSD Module for Pixhawk Flight Controller
Let us know!
We'll try to match the price for you
Couldn't load pickup availability
The Mini OSD Module for Pixhawk Flight Controllers is a compact and lightweight telemetry display module designed to make FPV drone monitoring more convenient. Built with an ATmega328P microcontroller and MAX7456 monochrome video overlay chip, it displays essential flight information directly on an analog FPV video feed, allowing pilots to monitor important flight parameters while operating their drones.
The module receives MAVLink telemetry data from compatible APM2.5, APM2.6, APM2.8, Pixhawk, and PX4 flight controllers and overlays the information onto the camera video signal in real time.
With support for both PAL and NTSC video formats, an FTDI-compatible programming interface, a 6-pin ISP header, and two independent power sections, this Mini OSD module offers convenient integration and configuration for different setups. It is a practical choice for FPV quadcopters, multirotor platforms, drone telemetry monitoring, and DIY UAV development projects.
Note: Verify the actual connector pinout and supply configuration before installation. Never apply 12V directly to the 5V digital input.
Note: Displayed flight parameters depend on the installed firmware and sensors connected to the flight controller.
| Specification | Details |
|---|---|
| Module Type | On-Screen Display (OSD) Module |
| Product Category | Mini OSD Telemetry Board |
| Microcontroller | ATmega328P |
| Microcontroller Architecture | 8-Bit AVR |
| Bootloader | Arduino-Compatible |
| Video Overlay IC | MAX7456 |
| Display Type | Monochrome Character Overlay |
| Video Signal | Analog Composite Video |
| Video Format | PAL / NTSC |
| Telemetry Protocol | MAVLink |
| Communication Interface | UART Serial |
| Digital Supply Voltage | 5V DC |
| Analog Supply Input | Up to 12V DC (depending on configuration) |
| Onboard Analog Regulator | 5V / 500mA |
| Power Sections | 2 Independent Sections |
| Power Indicators | LED Indicators |
| Programming Interface | FTDI-Compatible Serial |
| ISP Interface | Standard 6-Pin Header |
| Power Configuration | Solder Jumpers |
| PAL Selection | Solder Jumper |
| Test Points | HSYNC and LOS |
| Flight Controller Compatibility | Supported APM / Pixhawk Systems |
| Application | FPV Flight Telemetry Display |