iMax B6AC Smart Balance Charger 80W
The IMAX B6 80W 6A Charger/Discharger 1-6 Cells is a highly advanced charger that boasts the ability to charge, balance, and discharge various types of batteries including LiIon, LiPoly, LiFe (A123), NiCd, and NiMH. This original iMax B6AC battery charger is microprocessor-controlled, similar to top-of-the-line chargers, and is equipped with the ability to balance individual cells in your Li-XX batteries.
With a charging capacity of 0.1 to 6.0A, it can easily charge packs up to 6S. Additionally, This 80W Lipo battery charger for RC batteries features input voltage protection, preventing it from draining your car battery while in the field, and also provides storage charging for your packs when not in use. Its flexibility is further enhanced by the fact that this iMax B6AC 80W smart charger dual power can be powered by any power supply delivering between 11 to 18V.
The charger's JST-XH charge plug renders it compatible with Zippy, HXT, Loong Max, and any other pack with a JST adapter.
Features
- Microprocessor controlled
- Delta-peak sensitivity
- Individual cell balancing
- LiIon, LiPoly, and LiFe are capable
- NiCd and NiMH capable
- Large range of charge currents
- Storage charge function
- Time limit function
- Portable balance charger
- Input voltage monitoring (Protects car batteries in the field)
- Data storage (Store up to 5 packs in its memory)
- Battery break-in and cycling.
Package Includes
- 1 x iMax B6AC Smart Balance Charger
- 1 x AC input power adapter cable with three-prong
- 1 x DC input power cable – barrel jack to alligator clips
- 1 x 4 mm banana plugs to a male
- 1 x Printed Instruction Manual
Specifications
|
Brand
|
iMax
|
|
Model
|
B6AC Smart Balance charger
|
|
Adapter
|
Built-in AC Adapter
|
|
Charges
|
NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries
|
|
Charge current range
|
0.1–5.0 A (50 W max)
|
|
Discharge current range from
|
0.1–1.0 A (5 W max)
|
|
AC Input
|
100-240 V 50/60 Hz
|
|
DC Input
|
11–18 V
|
|
Dimensions (Approx)
|
11cms x 5 cms x 3 cms
|
|
Weight (approx)
|
100 grams
|
Specifications:
Brand
Specifications:
iMax
Specifications:
Model
Specifications:
B6AC Smart Balance charger
Specifications:
Adapter
Specifications:
Built-in AC Adapter
Specifications:
Charges
Specifications:
NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries
Specifications:
Charge current range
Specifications:
0.1–5.0 A (50 W max)
Specifications:
Discharge current range from
Specifications:
0.1–1.0 A (5 W max)
Specifications:
AC Input
Specifications:
100-240 V 50/60 Hz
Specifications:
DC Input
Specifications:
11–18 V
Specifications:
Dimensions (Approx)
Specifications:
11cms x 5 cms x 3 cms
Specifications:
Weight (approx)
Specifications:
100 grams
1. How to use the iMax B6AC charger for LiPo batteries?
Connect your LiPo battery's main leads to the banana plugs and the balance connector to the JST-XH port, ensuring correct polarity with the black wire aligned to the negative marking. Select LiPo Balance mode on the iMax B6AC, set your cell count (2S-6S), and charging current (typically 1C rate). Press and hold START/ENTER for 3 seconds to begin charging. The built-in balancer ensures each cell charges evenly, preventing dangerous overcharging while maximizing battery lifespan and performance.
2. How to calibrate the iMax B6AC 80W charger?
Access calibration mode by holding specific button combinations while powering on the charger, then navigate to the calibration menu using the INC/DEC buttons. Connect a precision multimeter to verify voltage readings and adjust the internal calibration values accordingly. The iMax B6AC 80W stores these calibration settings permanently, ensuring accurate voltage and current measurements for all future charging sessions. Regular calibration every 6 months maintains optimal charging precision and extends both charger and battery lifespan.
3. How to charge different battery types using the iMax B6AC?
Navigate through the battery selection menu using INC/DEC buttons to choose from LiPo, LiIon, LiFe, NiMH, NiCD, or Pb (lead-acid) chemistries. Each battery type has specific voltage and current parameters automatically configured for safe charging. Set the appropriate cell count and charging current based on your battery specifications. This versatility makes the charger suitable for RC vehicles, drones, and various electronics, which explains why many users leave positive iMax B6AC review ratings online.
4. How to use the iMax B6AC as a discharger?
Select the discharge mode from the main menu and connect your battery normally with both main leads and balance connector. Set the desired discharge current and cutoff voltage to prevent over-discharge damage. The iMax B6 balance charger monitors individual cell voltages during discharge, automatically stopping when any cell reaches the minimum safe voltage. This feature is essential for battery conditioning, capacity testing, and preparing LiPo batteries for long-term storage at optimal voltage levels.
5. How to power the iMax B6AC at home?
The charger features a built-in switching power supply that accepts 100-240V AC power directly from your wall outlet without external adapters. Simply plug the included AC cord into the charger and your household socket for immediate operation. Alternatively, you can power it using 11-18V DC from a car battery or external power supply connected to the DC input port. This dual power capability makes the iMax B6AC charger convenient for both indoor and outdoor use without additional equipment.
