Official Raspberry Pi 4 Model B 4GB RAM Development Board
1000uF 25V Electrolytic Capacitor – Through Hole DIP
Let us know!
We'll try to match the price for you
Couldn't load pickup availability
The 1000uF 25V Electrolytic Capacitor is a polarized radial through-hole electronic component designed for energy storage, DC voltage filtering and power supply stabilization. With a capacitance of 1000 microfarads (1mF) and a rated voltage of 25V DC, this capacitor is suitable for various electronic circuits, PCB assemblies, power supply systems and DIY electronics projects.
This 1000uF 25V capacitor helps smooth voltage fluctuations, reduce ripple and provide temporary energy storage in electronic circuits. Its radial lead configuration allows convenient through-hole PCB mounting, making it suitable for prototyping, circuit development and electronic equipment repair.
Explore our wide range of capacitors for power supply circuits, PCB development, electronics prototyping, and DIY projects.
| Specification | Details |
|---|---|
| Product Name | 1000uF 25V Electrolytic Capacitor |
| Capacitance | 1000uF |
| Rated Voltage | 25V DC |
| Capacitor Type | Electrolytic Capacitor |
| Mounting Type | Through Hole (DIP) |
| Polarity | Polarized |
| Tolerance | ±20% (Typical) |
| Lead Type | Radial Leads |
| Applications | Power Filtering, Voltage Smoothing, Energy Storage, Signal Coupling |
| Package Quantity | 1 Piece |
A 1000uF 25V electrolytic capacitor smooths DC supply rails, filters ripple after a rectifier and buffers current spikes from motors or servos. Place it across the supply near the load, matching polarity.
Yes. 1000 microfarads equals 1 millifarad. Electronics suppliers usually write it as 1000uF.
Yes. The 25V rating is the maximum voltage, so it is safe on 5V, 9V and 12V rails. Keep a margin of at least 20 percent above your working voltage.
Yes. The longer leg is positive and the stripe marks the negative leg. Reversing it can make the capacitor heat up, bulge or burst.
Yes. A 1000uF 35V or 50V capacitor works in place of 25V; it is just larger. Do not go lower than your circuit voltage.