Analog Multimeters

Compare
MetroQ MTQ-890 KPH BPT609 Analog Multimeter
MetroQ MTQ-890 KPH BPT609 Analog Multimeter MetroQ Analog Multimeter MTQ 890, Resistance Range-20M?? comes with a DC voltage range of 1000 V. This analog voltmeter has a capacitance range of 25 ?F and resistance range of 20 M ohm. This Metro Q analog multimeter...

Rs. 1,449

~~Rs. 1,625~~
Rs. 1,449
Save Rs. 176

Unit price

per

Recently Viewed Products

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Applications of Analog Multimeters

1. Electronics Testing

Observing signal fluctuations / transients: Because analog meters use a needle, they can show real-time trends and fluctuations more clearly than a digital readout.

Testing older or vintage circuits: For classic electronics (radio tuners, old power supplies), analog meters provide a rugged, intuitive way to check voltages and currents.

Component testing (diodes, capacitors): While not as precise as a bench instrument, analog meters can help quickly check whether a diode or resistor is behaving roughly as expected.

2. DIY Projects

Tuning circuits: If you're building oscillators, amplifiers, or radios, an analog meter helps you visually “peak” or tune parts by watching the needle move.

Power supply prototyping: When designing your own power regulator or PSU, you can use it to monitor current or voltage changes as you adjust resistors, feedback loops, etc.

Battery / low-voltage projects: Because analog meters often draw less internal power and can operate without requiring a separate power source (for voltage and current readings), they’re handy in simple DIY circuits.

3. Professional Use

Field maintenance in industrial settings: In harsh or noisy environments, analog meters are simpler, more rugged, and less sensitive to electromagnetic interference.

Trend monitoring in system diagnostics: For technicians monitoring real-time behavior (like current surges, transient responses), analog meters help by giving a continuous visual response.

Cost-effective tool for basic diagnostics: For routine checks (voltage, current, resistance) where high precision isn’t critical, analog multimeters are more affordable.

Usage Guide

Select the appropriate measurement mode (AC/DC Voltage, Resistance, or Current) before connecting the probes.

Always start with the highest range to avoid overloading the meter and then adjust downward for accuracy.

Insert the red probe into the V/Ω/mA port and the black probe into the COM port for most measurements.

For voltage measurement, connect the probes in parallel with the circuit.

For current measurement, connect the meter in series with the load and never measure current on a voltage setting.

When measuring resistance, ensure the circuit is powered off to avoid inaccurate readings or damage.

Observe the movement of the needle to identify fluctuations, trends, or unstable components in real time.

Zero-adjust the meter using the calibration knob when taking resistance measurements for improved accuracy.

Safety Instructions

Never measure voltage or current without selecting the correct range; incorrect settings may damage the meter.

Avoid measuring high voltage on low-range settings to prevent internal coil damage.

Do not touch probe tips while testing to prevent electric shock.

Inspect the probes for cracks, exposed metal, or damaged insulation before use.

Disconnect power from the circuit when switching the meter to a different mode or range.

Keep the multimeter dry and away from high humidity to maintain accuracy and prevent short circuits.

Ensure correct polarity when measuring DC values to avoid needle deflection in the wrong direction.

Do not attempt to measure mains electricity unless you are trained and using a properly rated analog multimeter.

Accuracy & Range Specifications

Measurement Type	Typical Range	Accuracy (Approx.)	Notes
DC Voltage (VDC)	0–10V, 50V, 250V, 500V	±3% of full scale	Ideal for battery testing, low-voltage circuits, and electronics troubleshooting.
AC Voltage (VAC)	0–50V, 250V, 500V	±4% of full scale	Suitable for household AC checks and general diagnostics.
DC Current (ADC)	0–50µA, 2.5mA, 25mA, 250mA	±3% of full scale	Used for measuring circuit load and current draw analysis.
Resistance (Ω)	×1, ×10, ×1K, ×100K ranges	±3% of full scale	Helps with continuity checks and component testing.
Battery Test	1.5V / 9V	Pass/Fail Needle Zone	Provides quick battery health indication under load.
Zero Adjustment	Applicable in Ω mode	Manual Calibration	Ensures accurate resistance readings by adjusting needle baseline.

Troubleshooting Tips

If the needle does not move, check whether the meter is set to the correct measurement mode and range.

Ensure the test probes are firmly connected to the correct ports (COM and V/Ω/mA).

For resistance measurements showing incorrect values, adjust the zero-ohm dial and ensure the circuit is powered off.

If readings drift or fluctuate excessively, inspect the probe wires for breaks or loose connections.

When the needle stays at full scale, you may be measuring a value beyond the selected range—switch to a higher range immediately.

If the meter shows no continuity in Ohm mode, verify the internal battery is still good.

When the pointer returns slowly or sticks, gently tap the meter face to confirm if it is a mechanical sticking issue.

If voltage readings seem unusually low, check for weak internal batteries (required for resistance mode) or damaged probe tips.

Maintenance Tips

Store the analog multimeter in a dry, dust-free environment to protect its internal coil and mechanical movement.

Calibrate the zero-adjustment knob periodically when measuring resistance for accurate readings.

Clean the probe tips regularly to ensure solid electrical contact during measurement.

Avoid dropping or shaking the multimeter, as the needle mechanism is sensitive and can become misaligned.

Replace the internal battery as soon as resistance measurements become unreliable or inconsistent.

Keep the multimeter away from strong magnetic fields that can affect the needle’s accuracy.

Use a protective case when transporting the meter to prevent scratches or damage to the display window.

Perform regular inspections for cracked probes, loose terminals, or worn-out cables and replace them as required.

Passive Buzzer Module 3.3V-5V DC

Filamet is really good

Really good filament with no moisture and printed perfectly

The module is working fine i wished you guys had a soldered one and i think you missed the anntena for this module so make sure to provide one with this module

Delivery and quality

Delivery in one day excellent
Product quality is good

Good Product

Good product and fast courier services. It was good experience ordering from Robocraze

All Categories

Categories

Refined By Clear all

Availability

Price

Featured Products

Recently Viewed Products

All About Analog Multimeters

Applications of Analog Multimeters

1. Electronics Testing

2. DIY Projects

3. Professional Use

Usage Guide

Safety Instructions

Accuracy & Range Specifications

Troubleshooting Tips

Maintenance Tips

Frequently Asked Questions

1. What measurements can these analog multimeters perform?

These multimeters are traditional measuring instruments capable of performing several fundamental electrical measurements. The specific model shown, the MetroQ MTQ-890, is listed with capabilities including:

Voltage (DC voltage up to 1000 V is specified, and typically AC voltage is also supported)

Current (implied by the description ""voltage & current"")

Resistance (up to 20 MΩ)

Capacitance (up to 25 µF)

Analog multimeters are also often equipped to check the functionality of components like diodes and transistors.

2. Are these meters suitable for AC and DC current/voltage?

3. Can these multimeters be used for electronics and electrical projects?

4. Are these meters portable and easy to use?

Let customers speak for us

All Categories

Analog Multimeters

Categories

Refined By Clear all

Availability

Price

Featured Products

Sort by:

Recently Viewed Products

All About Analog Multimeters

Applications of Analog Multimeters

1. Electronics Testing

2. DIY Projects

3. Professional Use

Usage Guide

Safety Instructions

Accuracy & Range Specifications

Troubleshooting Tips

Maintenance Tips

Frequently Asked Questions

1. What measurements can these analog multimeters perform?

These multimeters are traditional measuring instruments capable of performing several fundamental electrical measurements. The specific model shown, the MetroQ MTQ-890, is listed with capabilities including:

Voltage (DC voltage up to 1000 V is specified, and typically AC voltage is also supported)

Current (implied by the description ""voltage & current"")

Resistance (up to 20 MΩ)

Capacitance (up to 25 µF)

Analog multimeters are also often equipped to check the functionality of components like diodes and transistors.

2. Are these meters suitable for AC and DC current/voltage?

3. Can these multimeters be used for electronics and electrical projects?

4. Are these meters portable and easy to use?

Sign up for our newsletter

Shop the look

Choose Options

Edit Option

Back In Stock Notification

Compare

Choose Options

Let customers speak for us