Works as described
The circuit works exactly as described, and I'm completely satisfied with it. No problems at all.
BEST COUPON FOR YOU
When you shop for ₹ 2500 or more.Applicable on Checkout.
*Coupons are not applicable on Original Boards and Kits
The NE555 delay timer switch is manufactured for high-performance timing and based on the NE555 chip. This delay switch module is a monostable switch module that finds itself very useful in vehicle-based applications like delay to prevent car ignition. The NE555 delay timer switch module is constructed with a power indicator LED and switch trigger timing indication LED.
This is a monostable generator based on the NE555 integrated circuit. It has an adjustable delay time from 0 to 10 seconds using the potentiometer or by changing the capacitance. It is also capable of controlling the device below 220V/10A.
Chip Used | NE555 Chip |
Input voltage | 6V |
Adjustable time | 0-10seconds |
AC Control voltage | 250V/max. 10A |
DC Control Voltage | 30V/max. 10A |
Dimensions | 3 x 2 x 1cms |
Weight | 5 grams |
For more details, please check our Shipping and Return Policy
The circuit works exactly as described, and I'm completely satisfied with it. No problems at all.
ne555 is a standard timer that I constantly use in my projects, robocraze never disappoints me with the quality of the product
iam using it in my alarm project, gives good results all time
iam impressed wiht the fast delivery of th eproduct
Regular customer of robocraze.best customer service always follow up till the product is into our hands .
Product works good
Hello, that depends on several factors, replacing the capacitor with a larger one in the NE555 5V delay timer circuit will increase the delay time. If you adjust the potentiometer that will also help in this case. Thank You
You can use it as an ON-delay timer as well as an OFF-delay timer depending on whether you connect the load on the Normally Open or Normally Closed side.
Hello, you can use the NE555 5V delay timer to extend the on-time of your solenoid. By configuring the timer in monostable mode, you can set it to keep the solenoid activated for 6 to 8 seconds after receiving a pulse signal. Thank you.