Anycubic Standard Resin Black 1kg | UV Resin for 3D Printing

Anycubic Standard Resin Black 1kg | UV Resin for LCD & DLP 3D Printers

Anycubic Standard Resin Black is a high-quality photopolymer resin designed for detailed and smooth 3D printing. Its low-viscosity formulation provides smooth resin flow and helps reproduce fine details, sharp edges and clean surfaces. With a low volume shrinkage of 4.5–5.5%, the resin helps maintain the shape and dimensional accuracy of printed models. It is compatible with 365–405nm UV LCD and DLP 3D printers and is suitable for models, prototypes, miniatures, decorative parts and DIY projects. The black finish gives printed models a deep, clean appearance and is suitable for both finished models and post-processing applications. Supplied in a convenient 1kg bottle, it is suitable for regular resin 3D printing.

Features

• High-Precision Printing: Designed to reproduce fine details, sharp edges and intricate features for clean and accurate 3D models.
• Low Shrinkage: 4.5–5.5% volume shrinkage helps maintain model dimensions and reduce deformation during printing.
• Smooth Resin Flow: Low viscosity of 200–230 mPa·s at 25°C allows the resin to flow smoothly during the printing process.
• Fast Bubble Dissipation: Helps bubbles dissipate quickly from the resin to support consistent printing and surface quality.
• Strong Bed Adhesion: Provides reliable adhesion to the build plate, helping reduce the possibility of model detachment during printing.
• Smooth Surface Finish: Produces clean and smooth model surfaces with well-defined details.
  LCD & DLP Compatibility: Designed for compatible LCD and DLP resin 3D printers using 365–405nm UV light.
• Black Color: Black (#212721) resin produces a deep, uniform finish for models, prototypes and decorative prints.
• Beginner-Friendly: Suitable for both new and experienced resin 3D printing users.
• Versatile Applications: Ideal for prototypes, miniatures, display models, decorative parts, DIY projects and general-purpose 3D printing.

Instructions for Use

1. Before Use

• Shake the resin bottle thoroughly before pouring.

• Clean the resin tank and build plate to remove dust, cured resin or other contaminants.

• Ensure the bottom of the resin tank is clean and highly transparent.

• Check that the release film is clean and free from damage.

• Confirm that the printer's printing parameters are correctly set for the resin.

• Maintain a recommended printing environment of 20–35°C to help prevent temperature-related printing failures.

2. During Use

• Unscrew the bottle cap and carefully remove the sealing film.

• Pour the required amount of resin into the resin tank.

• Do not exceed the maximum fill line of the resin tank.

• Avoid splashing or spilling resin during handling.

3. After Printing

Use suitable tools and materials for post-processing:

• Scraper for removing printed models from the build plate

• Flush cutters for removing supports

• Tweezers for handling small parts and supports

• Nitrile gloves for safe handling

• ≥95% IPA or suitable resin cleaning solution for cleaning printed models

4. Post-Processing

A. Remove the Model:
Use a scraper to carefully remove the printed model from the build plate, then remove the support structures using suitable tools.

B. Clean the Model:
Wash the printed model in an Anycubic Wash & Cure machine for approximately 10 minutes. Use ≥95% alcohol or a suitable resin cleaner.

C. Dry the Model:
Allow the model to air-dry, blow-dry it, or use a drying chamber. Proper drying helps prevent water absorption and potential cracking.

D. Secondary Curing:
Place the cleaned and dried model under suitable UV curing conditions and cure for approximately 3–5 minutes.

E. Recycle Unused Resin:
Filter unused resin through a 100-mesh sieve before returning it to storage or reusing it. This helps remove cured particles and other contaminants.

Precautions

• Storage: Store the resin at room temperature and keep it away from direct light.

• Recommended Temperature: Use the resin above 20°C. Low temperatures may reduce printing success, while higher temperatures can accelerate pigment settling.

• Pigment Settling: If pigment settles at the bottom, stir the resin with a plastic scraper or shake the bottle thoroughly before use.

• Light Protection: Resin cures when exposed to sunlight. Use the printer in a dim, ventilated area or keep the printer covered when not in use.

• Post-Printing Care: Remove printed models promptly after washing to help maintain their intended properties.

• Personal Protection: Always wear nitrile gloves and protective goggles when handling liquid resin. Avoid direct contact with skin and eyes.

• Waste Disposal: Fully cure leftover liquid resin before disposing of it as solid waste. Follow applicable local waste-disposal requirements.

• Ventilation: Maintain adequate ventilation while handling and printing with resin.

• Keep Away From Children & Pets: Keep liquid resin away from children, pets and pregnant women.