Arduino UNO 21-in-1 Starter Kit compatible

UNO 21-in-1 Starter Kit compatible with Arduino

This is a 21-in-1 Arduino starter kit based is validated on Arduino but other microcontrollers can be used as well. This UNO starter kit contains all the necessary electronic components to get started with the UNO board, Arduino, and embedded systems. All the sensors included in the kit are of good quality and are compatible with Arduino.

The Arduino Starter kit will help you get started in the world of electronics and embedded system programming. This kit is aimed at beginners and intermediates and can be used to jump-start your growth and learning towards DIY electronics and embedded system. This Arduino starter kit is useful for students and hobbyists to test and prototype their electrical projects. Engineering students can buy UNO basic starter kits online to develop and build their final semester projects.

Uno SMD: The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. 

Breadboard: A breadboard allows for easy and quick creation of temporary electronic circuits or to carry out experiments with circuit design.

Battery cap: The Battery caps serve two purposes; they permit the checking and maintenance of water and acid levels and provide a vent for the escape of gases formed when the battery is charging.

Resistor Box: The resistance box is an instrument for measuring and comparing electrical resistances.

Capacitor: A capacitor is a passive two-terminal electrical component used to store energy electrostatically in an electric field.

Jumper Wires: Male ends have a pin protruding and can plug into things, while female ends do not and are used to plug things into. Male-to-male jumper wires are the most common and what you likely will use most often.

Transistor: A transistor is a device that regulates current or voltage flow and acts as a switch or gate for electronic signals

Button Switch: A button switch is a type of switch which consists of a simple electric mechanism or air switch mechanism to turn something on or off.

Buzzer: A buzzer or beeper is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric (piezo for short).

LDR: An LDR (Light Dependent Resistor) is a component that has a (variable) resistance that changes with the light intensity that falls upon it. This allows them to be used in light sensing circuits. Light Dependent Resistors (LDR) are also called photoresistors.

SEVEN-SEGMENT DISPLAY: A seven-segment display is a set of seven bar-shaped LED (light-emitting diode) or LCD (liquid crystal display) elements, arranged to form a squared-off figure 8. A few seven-segment displays use other illumination devices, such as incandescent or gas-plasma ("neon") lamps.

PIR Motion Sensor Module: PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. PIRs are basically made of a pyroelectric sensor, which can detect levels of infrared radiation.

16X2 LCD MODULE: The 16x2 Alphanumeric LCD Display Module is equally popular among hobbyists and professionals for its affordable price and easy-to-use nature. As the name suggests the 16x2 Alphanumeric LCD can show 16 Columns and 2 Rows therefore a total of (16x2) 32 characters can be displayed. Each character can either be an alphabet or number or even a custom character. 

Pinout for Arduino Uno

Arduino Uno Pinouts

Applications:

• Home Automation System
• Security System
• IoT based projects
• DIY Projects

Package Includes:

• 1 x UNO SMD Board compatible with Arduino
• 1 x Breadboard
• 5 x LED
• 1 x LDR
• 1 x 16 x 2 LCD
• 40 x Connecting Wires (male to male and male to female)
• 1 x 5V Relay
• 5 x Button Switch
• 1 x Resistance Box
• 1 x Capacitor Box
• 5 x BC548 NPN Transistor
• 1 x PIR Motion Sensor Module 
• 1 x Buzzer
• 1 x 9V Battery
• 1 x Connecting Cap
• 1 x 7805 Voltage converter
• 2 x Potentiometer (100ohm, 10kohm)
• 1 x Toy Motor (2000 RPM)
• 1 x L293D IC
• 1 x Seven Segment Display(Common Cathode)
• 1 x USB cable

Specification: