Found a better price?

Let us know!
We'll try to match the price for you

Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick

Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick
Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick
Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick
Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick
  • Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick
  • Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick
  • Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick
  • Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick

Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick

Regular price
Rs. 239
Sale price
Rs. 239
Regular price
Rs. 310
You save Rs. 71
23% off
You save Rs. 71
Unit price
per 
  • ⚡ Dispatched within 24 hours
  • 🚚 Free shipping on orders above Rs 500/-
  • 💰 Earn RC Coins on every purchase
  • 🛠️ Dedicated Technical Support Team
  • This is Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick
  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  • It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling)
  • Built-in regulator (no external logic voltage supply needed)
  • Can interface directly with 3.3 V and 5 V systems
  • Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
  • Short-to-ground and shorted-load protection

Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

If you want to control the stepper motor with the stepper motor driver, for that you will need a few essential components like

Package Includes:

  • 1 x Original DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink RAMPS1.4 RepRap StepStick

Specifications:

Operating Voltage (V) 8 - 45
Logic Voltage 2.5 - 5.25
Microstep resolutions Full, 1/2, 1/4, 1/8, 1/16 and 1/32
Dimensions (mm) 15 x 20
Weight (gm) 5g

1. What is a DRV8825 stepper driver?

  • The DRV8825 is a motor driver integrated solution for printers, scanners, and other automated equipment applications. The device, which includes two H-bridge drivers and a microstepping indexer, is designed to power a bipolar stepper motor.

2. What is the difference between A4988 and DRV8825?

  • The DRV8825 has a higher maximum supply voltage than the A4988 (45 V vs 35 V), which means it can be used at higher voltages more safely and is less vulnerable to damage from LC voltage spikes.

3. How does the DRV8825 work?

  • The DRV8825 has two control inputs: STEP and DIR. The microsteps of the motor are controlled by STEP input. Each HIGH pulse sent to this pin drives the motor in the number of microsteps determined by the microstep selection pins. The higher the pulse frequency, the faster the motor will spin.