Robocraze FREE SHIPPING BEST PRICE GUARANTEED
Low stock: 6 left
Couldn't load pickup availability
Technical Support & Easy Returns
Raise a Ticket
Earn RC Coins on Every Purchase
Rewards
Cash on Delivery Available
Cash Delivery
COUPON
When you shop for ₹ 25000 or more.Applicable on Checkout.
*Coupons are not applicable on Original Boards and Kits
- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipo).
- Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems.
- GPS Module Available for Accurate Position Stabilization.
- Supported ESC Output 400 Hz refresh frequency
- Enhanced Failsafe Features, Including Auto Return-to-Home
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- The MAX Power Consumption is 1.5 W (0.3 A at 5 V)
Original DJI NAZA M V2 Flight Controller With GPS & PMU V2 for Multirotor Quadcopter
DJI Naza-M V2 Multi-Rotor Flight Controller With GPS Module Supports nine multi-rotor configurations, the DJI NAZA-M V2 Drone Controller With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system. Following are the capabilities inbuilt in this DJI Naza-M V2 Controller.
9 Types Multirotor Configurations Supported
The Naza-M V2 is a powerful flight controller for enthusiast, commercial and industrial flyers. It’s easy to install, simple to configure and above all, extremely stable. Nine types of traditional motor mixes are supported, making it ideal for every setup.
Free Ground Station Support
16 point Ground Station is available free for both iPad and PC, without serial number verification. 2.4G Bluetooth Datalink required.
Advanced Attitude Stabilization Algorithms
The Naza-M V2 boasts the extraordinary stability you would expect of all DJI flight control systems and combines it with unparalleled maneuverability with and without GPS. Built into it are automatic GPS course correction plus GPS and compass interference monitoring, which combine to offer more stable flight and minimal magnetic interference.
Takeoff Assistance
Drift-free, stable take offs on different surfaces is ensured with Takeoff Assistance.
Intelligent Orientation Control (IOC)
Forward on a multirotor is normally the direction the nose is facing, which can get confusing when turning, but with IOC switched on, direction is hugely simplified.
- In Course Lock mode, forward is the same as the nose direction recorded on takeoff.
- In Home Lock mode, forward is the direction from the Quadcopter's current position back to home.
Motor Failure Protection
If a hexrotor or octorotor equipped with a Naza-M V2 suffers a motor failure in flight in attitude or GPS mode, it will maintain its altitude and rotate around the stopped motor. This allows it to fly safely back to home and land.
Failsafe And Auto Go Home Support
If the connection between the multirotor and the remote control are disconnected during flight, a failsafe system will activate. Provided there was enough GPS signal at the time of the disconnection, the multirotor will fly back to its point of takeoff and land automatically. This feature can also be triggered manually using the One-Key Go-Home function activated using Assistant.
Assistant for Smartphone
Using a BTU with power efficient Bluetooth, parameters can be adjusted at any time through a smartphone without excessive power use. Connection records are automatically stored by the Bluetooth module and protected by password. Parameters can be automatically synchronized to the cloud restored immediately when mobile devices are changed.
These features makes the DJI Naza-M V2 very versatile and best controller for drones.
Built-In Functions:
- Multiple Autopilot Control Mode
- Enhanced Fail-safe
- Low Voltage Protection
- S-Bus Receiver Support
- PPM Receiver Support
- Independent PMU
- Module 2-axle Gimbal Support
Shipping & Returns
Shipping & Returns
- All orders confirmed before 3 pm IST are shipped on the
same day, barring rare pickup delays on holidays or disturbances - Delivery time in Metro cities is 1-3 days, Others it is
3-7 days. It varies based on location, reliant on courier services - Return window: 7 days from receipt unless stated
otherwise. No refunds/replacements after - Returns only for non-working/damaged products are accepted
- Initiate return requests to our customer service team via Support ticket or contact us at +91-8123057137
- Refunds are processed within 3-4 working days post inspection and approval.
For more details, please check our Shipping and Return Policy
People Also Buy
APM 2.8 Flight Controller (Without Compass)
RPLiDAR A1M8 360 Degree Laser Range Finder
KK board 2.1.5 Multi-Rotor LCD Flight Control Board
Found a better price?
Let us know!
We'll try to match the price for you
Package Includes :
- 1 x Main Controller Unit.
- 1 x Power Management unit.
- 8 x Servo cable.
- 1 x LED Module.
- 1 x Micro USB Cable.
- 2 x Adhesive Tape.
- 1 x GPS Module.
Specifications:
| Supported ESC Output | 400Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 4 channels |
| Working Voltage Range | MC:4.8V~5.5V
VU Input: 7.4V ~ 26.0 V(recommend 2S ~ 6S LiPo) Output(V-SEN port red wire): 3A@5V (burst current:7.5A) |
| Power Consumption | MAX: 1.5W(0.3A@5V)
Normal:0.6W(0.12A@5V) |
| Operating Temperature | -10°C ~ 50°C |
| Assistant Software System Requirement | Windows XP sp3 / Windows 7 / Windows 8 |
| Hovering Accuracy(GPS Mode) | Vertical:±0.8m & Horizontal:±2.5m |
| Weight | MC:27g, PMU:28g, GPS:27g, LED:13g |
| Dimensions |
MC: 45.5mm x 32.5mm x 18.5mm PMU: 39.5mm x 27.5mm x 10.0mm GPS & Compass 46mm(diameter)x10mm LED: 25mm x 25mm x 7.0mm |
Specifications:
VU Input: 7.4V ~ 26.0 V(recommend 2S ~ 6S LiPo)
Specifications:
Output(V-SEN port red wire): 3A@5V
Specifications:
(burst current:7.5A)
Specifications:
Normal:0.6W(0.12A@5V)
Specifications:
MC: 45.5mm x 32.5mm x 18.5mm
Specifications:
PMU: 39.5mm x 27.5mm x 10.0mm
Specifications:
GPS & Compass 46mm(diameter)x10mm
Specifications:
LED: 25mm x 25mm x 7.0mm
1.How far can a drone fly away from the controller?
- The typical range for mid-level consumer drones is 400 metres to three kilometres, or 0.25 to 1.5 miles. When we mention these statistics, we are referring to the range in relation
2.Can you fly a DJI drone without registering it?
- Except for drones weighing 0.55 pounds or less (less than 250 grammes) and flown exclusively under the Exception for Recreational Flyers, all drones must be registered. Drones registered under Part 107 may also be flown for recreational purposes.
3.How do I keep my DJI battery healthy?
- To maintain battery health, fully charge and discharge the battery at least once every three months. This can be accomplished using the DJI GO 4 app or DJI Pilot. Batteries should never be stored in vehicles other than for transportation. The temperatures are usually too hot or cold, which can damage the battery.
