-
USB interface, no driver required.
-
Reads the EM card inside the ID number and send it to the computer via the USB interface.
-
The output format can be selected by management cards.
-
Support for EM4100 cards.
HX203D Smart-ID Chip Card Reader
HX203D RFID card reader is a compact simple and fast 125Khz RFID Reader with a USB interface. It reads the ID number from the EM 4100 card or a compatible card. After detecting the card, the card number is sent directly via the USB interface, just like the entry number from the USB keyboard. JT308 RFID Reader is a standard HID devices, means you don't need to install any driver, the code can be read into any input editor.
Package Includes:
- 1 x 125Khz Card Reader
- 1 x UB Cable
Specifications
| Reading distances |
8m |
| Frequency | 125KHz |
| Temperature | -30 degrees Celsius to +60 degrees Celsius |
| Humidity | 5% -95% Relative humidity |
| Output card format | 8H10D |
| USB cable length | 120 cm / 47in |
| Dimension | 95 x 61 x 10 (mm) |
| Weight | 50 grams |
| Bestseller | No |
|---|---|
| Is Featured | No |
| rpi | No |
| HOT DEALS | No |
Can a smartphone read RFID?
NFC enabled phones can ONLY read NFC and passive high-frequency RFID (HF-RFID). These must be read at an extremely close range, typically a few centimetres. For longer range or any other type of RFID/active RFID, you must use an external reader for handling them with a mobile device.
