- The CH375B U Disk Read Write Module provides serial communication via serial input, serial output, and interrupt output monolithic/DSP/MCU/MPU connected.
- You can easily mount the module oin the MCU with the help of 2 x 8 connectors.
- It features an on board 3.3 V LDO 1117, provides 800 mA current.
CH375B U Disk Read Write Module
The CH375B U Disk Read Write Module is fully compatible with CH372, CH375. The CH375 firmware has a built in dedicated protocol processing Mass-Storage and can be directly used as the basic unit of reading and writing in sectors USB storage devices.
The CH375 dis read module integrated with a 8-bit data bus and read, write, chip and provides serial communication via serial input, serial output, and interrupt output monolithic/DSP/MCU/MPU connected. With the help of 2 x 8 connectors it can be easily mounted on a MCU.
- 1 x CH375B U Disk Read Write Module
Features of CH375B U Disk Read Write Module
|Model||CH375B U Disk Read Write Module|
|Oscillator||12 MHZ crystal|
|Communication||serial input, serial output, and interrupt output monolithic|
|Dimensions||5 x 3 x 1 cms|
What is the power supply needed for CH375B disk module?
You can power up the CH375B disk module with a 5 V power supply powered by the target board.
What are compatible devices with the CH375 disk module?
The CH375 disk module is best compatible with microcontrollers like /DSP/MCU/MPU controller and development boards compatible with arduino.