Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver 4-layer Substrate With Heat Sink
Special Price Rs 499.00 Rs 422.88 was Rs 1,062.00
- Easy to carry
- If there is any variation in colour, size or type then inform us through mailthat which colour, size or type you want because it is a single item.
- Easy to use
- DIY Kits
- Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink
LV8729 driver module with 128 subdivisions is a good choice for Nema stepper motor whose current is less than 1.5A, which makes motor steady, quiet and precise. Specifications: Dimensions: 1.5mm * 2.0mm (Same with the A4988 and DRV8825) Maximum drrive current: 1.5A (Default 0.8A) Operating voltage: 6V-36V, the proposed voltage is 12V Support subdivisions: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 Product Process: four layer PCB board In the 64 subdivision or 128 subdivision controller it has a better ultra-quiet effect. Note: Please make sure the connecting direction is right, or it will probably burn the driver chip and controller board. Recommend to do a good job of cooling for the module. Driver current algorithm and its adjustment: 1. Driver current algorithm: i=Vref/0.5, the default Vref about 0.4V, so the default current 0.8A, and maximum current 1.5A 2. Please DO NOT connect the motors when measuring the voltage, or it’s easy to burn the drive. 3. Please connect both the power supply and the USB for power when measuring the voltage. 4. Minor adjustment for potentiometer driver. Adjust it again after measurement to avoid burning driver by excessive current. 5. To increase the current by rotating the potentiometer clockwise slowly, and anticlockwise to reduce.
Write Your Own Review