LPC1768 Development Board

SKU
RC_R2086
Out of stock
Special Price Rs 2,534.64 Rs 2,148.00 was Rs 4,769.56
ARM Cortex-M3 processor, running at frequencies of up to 100 MHz ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC) Up to 512 kB on-chip flash programming memory Up to 64 kB On-chip SRAM In-System Programming (ISP) and In-Application Programming (IAP)
The LPC1768 is a Cortex-M3 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 100 MHz. Features include 512 kB of flash memory, 64 kB of data memory, Ethernet MAC, USB Device/Host/OTG, 8-channel DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 70 general purpose I/O pins. The LPC1768 is pin-compatible to the 100-pin LPC2368 ARM7 MCU Eight channel General Purpose DMA controller (GPDMA) Ethernet MAC with RMII interface and dedicated DMA controller USB 2.0 full-speed device/Host/OTG controller Four UARTs with fractional baud rate generation, internal FIFO, and DMA support CAN 2.0B controller with two channels SPI controller with synchronous, serial, full duplex communication Two SSP controllers with FIFO and multi-protocol capabilities Three enhanced I2C bus interfaces I2S (Inter-IC Sound) interface 70 General Purpose I/O (GPIO) pins with configurable pull-up/down resistors 12-bit/8-ch Analog/Digital Converter (ADC) with conversion rates up to 200 kHz 10-bit Digital/Analog Converter (DAC) with dedicated conversion timer and DMA Four general purpose timers/counters One motor control PWM with support for three-phase motor control Quadrature encoder interface that can monitor one external quadrature encoder One standard PWM/timer block with external count input Low power RTC with a separate power domain and dedicated oscillator WatchDog Timer (WDT) ARM Cortex-M3 system tick timer, including an external clock input option Repetitive interrupt timer provides programmable and repeating timed interrupts Each peripheral has its own clock divider for further power savings Standard JTAG test/debug interface for compatibility with existing tool
More Information
BestsellerNo
Is FeaturedNo
rpiNo
HOT DEALSNo
Write Your Own Review
You're reviewing:LPC1768 Development Board
Your Rating

Brands

Shipping

All Over India

Accept payments online

Genuine Products

Safe Transactions

Same Day Shipping

0 / 5
Contact Us