In stock
Rs 78.99 Rs 66.94
- This Is Another Great Iic/I2C/Twi/Spi Serial Interface.
- As The Pin Resources Of Arduino Controller Is Limited, Your Project May Be Not Able To Use Normal Lcd Shield After Connected With A Certain Quantity Of Sensors Or Sd Card.
- I2C Address: 0X20~0X27 (The Original Address Is 0X27,You Can Change It Yourself) Supply Voltage: 5V
- The Backlight And Contrast Is Adjusted By Potentiometer
- Come With 2 Iic Interface, Which Can Be Connected By Dupont Line Or Iic Dedicated Cable
16x2 LCD I2C Interface Adapter
These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on the underside of the module. If there a 3 sets of pads labelled A0, A1, & A2 then the default address will be 0x3F. If there are no pads the default address will be 0x27. The backlight and contrast is adjusted by potentiometer. Comes with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable.
Package Includes:
- 1 x 16x2 LCD I2C Interface Adapter
Specifications
| IC Chip | PCF8574 |
| Input Voltage Range(VDC) | 5 |
| PCB Size ( L x W ) mm | 42 x 20 |
| Weight (gm) | 4 |
| Bestseller | No |
|---|---|
| Is Featured | No |
| rpi | No |
| HOT DEALS | No |
Write Your Own Review
Can you control the contrast on this adapter plate?
Yes, you can control the contrast using potentiometer.
We found other products you might like!
