- The Nano board compatible with arduino has an operating voltage of 5V.
- It coms with soldered connectors and 8 analog inputs ports: A0 ~ A7.
- The Nano board has 14 Digital input / output ports: TX, RX, D2 ~ D13.
- This Nano microcontroller is compatible with arduino uses Atmel Atmega328P-AU MCU.
- You can buy Nano Arduino microcontroller board online at best prices.
Nano Development Board compatible with Arduino
The CH340 Soldered Nano Board R3 Chip without USB Cable chipboard is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint.
The Nano board compatible with arduino equips a low-cost USB-Serial Chip that makes it reliable and suitable for projects based around arduino. The Nano microcontroller board is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano R3).
The CH340 Nano microcontroller board can be powered via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
The size of Nano V3.0 with CH340 Chip is only 43 mm x 18 mm; it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.
Package Includes:
- 1 x Nano Board compatible with Arduino
- 30 x Soldered Pins
Nano Board compatible with Arduino Specifications
|
Analog I/O Pins |
8 |
|
Architecture |
AVR |
|
Clock Speed |
16 MHz |
|
Color |
Blue |
|
DC Current per I/O Pin |
40 mA |
|
Digital I/O Pins |
22 |
|
EEPROM |
1KB |
|
Flash Memory |
32 KB of which 2 KB used by bootloader |
|
Input Voltage(Recommended) |
7-12 V |
|
Microcontroller |
ATmega328 |
|
Operating Voltage |
5 |
|
Power Consumption |
19 mA |
|
PWM Output Pins |
6 |
|
SRAM |
2KB |
|
Weight (gm) |
8g |
|
Shipment Weight |
0.105 kg |
|
Shipment Dimensions |
6 × 5 × 3 cm |
| Bestseller | No |
|---|---|
| Is Featured | No |
| rpi | No |
| HOT DEALS | No |
What programmer should I use for Arduino Nano?
The Nano board can be programmed using the free Arduino software (download). Select "Arduino Diecimila, Duemilanove, or Nano w/ ATmega168" or "Arduino Duemilanove or Nano w/ ATmega328" from the Tools > Board menu.
| Analog I/O Pins |
8 |
| Architecture |
AVR |
| Clock Speed |
16 MHz |
| Color |
Blue |
| DC Current per I/O Pin |
40 mA |
| Digital I/O Pins |
22 |
| EEPROM |
1KB |
| Flash Memory |
32 KB of which 2 KB used by bootloader |
| Input Voltage(Recommended) |
7-12 V |
| Microcontroller |
ATmega328 |
| Operating Voltage |
5 |
| Power Consumption |
19 mA |
| PWM Output Pins |
6 |
| SRAM |
2KB |
| Weight (gm) |
8g |
| Shipment Weight |
0.105 kg |
| Shipment Dimensions |
6 × 5 × 3 cm |