Out of stock
Rs 676.14 Rs 573.00
To get the accurate measuring axis of x and y, follow the instructions below:
- To get "y" axis data output: select pin should be ground
- To get "x" axis data output: select pin should be tied to vcc toggle select pin to heigh and low pulses
- To get "x" & "y" axis data correspondingly and get the out put analog volates of the corresponding axis. inclusions 1 x 4 wire resistive touch screen mux break out board.
4 Wire Resistive Touch Screen
This is a 4 wire resistive touch screen mux break out baord which can be used with any graphical lcd in the back groung. It adapts analog by touching the screen on any given point and you will get analog voltage on the corresponding axis.
"X" Axis:
Moving from left to right the voltage remains constant and moving from top to bottom the voltage varies, (select pin should be active heigh).
"Y" Axis:
Moving from top to bottom the voltage remains constant and moving from left to right the voltage varies, (select pin should be active low).
Package Includes:
- 1 x 4 Wire Resistive Touch Screen
4 Wire Resistive Touch Screen Specifications
| Model | Resistive Touch Screen |
| Compatible Devices | Aurdino, 8051, PIC, AVR, Raspberry PI and all other Microcontrollers. |
| Included Components | Fargo Maestro 20 GSM/GPRS Modem, Power Connector, Serial Cable and Antenna |
| Number of Items | 1 |
| Product Dimensions | 10.2 x 7.6 x 5.1 cm |
| Weight | 100 grams |
| Bestseller | No |
|---|---|
| Is Featured | No |
| rpi | No |
| HOT DEALS | No |
Write Your Own Review
We found other products you might like!
