In stock
Special Price Rs 192.34 Rs 163.00 was Rs 287.92
- The endstop switch for 3d printers is made high quality connection wires using 22AWG copper.
- It has a rating of current 2A, 300V voltage.
- The insulation provided for the product give it a working temperature upto 80 degrees.
- The endstop switch uses a lever switch to detect when it is activated.
Endstop Switch for 3D Printers with Cable
This endstop switch for 3D printers comes alog with a 70cms cable wire. They are used together to detect when an X/Y/Z stage has reached its minimum or maximum in a 3D printer. The endstop switch for 3D printers is manufactured with a standard 4 pin 100″ pitch header and also features an LED on the board that will light up when the switch is activated.
Feature of Endstop switch with Cable
Wire Material | 22 AWG Wire with thick Copper Wire |
Resistance | Up to 2A, 300V |
Temperature Range | Up to 80 Degree Celsius |
Board Size | Approx. 39mm x 16mm x 7mm |
Wire length | 70cm |
Bestseller | No |
---|---|
Is Featured | No |
rpi | No |
HOT DEALS | No |
Write Your Own Review